Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. D. Sedillo, “Resolver-Based, Closed-Loop Position and Velocity Control for the LANSCE-R Wire Scanner”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM015, pp. 137-140.
[n] C. Z. Antoine et al., “Dust Contamination During Chemical Treatment of RF Cavities: Symptoms and Cures”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E09, pp. XX-XX.
[n] T. Kuerzeder, M. Arnold, L. E. Juergensen, J. Pforr, N. Pietralla, and F. Hug, “Beam Break-up Measurements at the Recirculating Electron Accelerator S-DALINAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1714-1716. doi:10.18429/JACoW-IPAC2016-TUPOR025
[n] G. Joshi, T. Ananthkrishnan, S. K. Bharade, P. M. Paresh, C. K. Pithawa, and C. I. Sujo, “RF Control System for 400 keV RFQ”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCB03, pp. 260-262.
[n] V. E. Blinov, V. A. Lebedev, A. V. Matveev, V. A. Tayursky, and A. A. Zholents, “Synchrotron Radiation Masking on Asymmetric 6.5 x 4.3- GeV B-factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2342-2345.
[n] J. Brossard et al., “Low Energy Beam Measurements Using PHIL Accelerator at LAL, Comparison with PARMELA Simulations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP210, pp. 1885-1887.
[n] C. Schmidt, R. Noble, J. Palkovic, and F. Mills, “Redesign of the Low Energy Section of the Fermilab Linac to Improve Beam Brightness”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-56, pp. 188-189.
[n] R. Nagaoka et al., “Study of Upgrade Scenarios for the SOLEIL Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 203-205. doi:10.18429/JACoW-IPAC2014-MOPRO053
[n] J. Conrad et al., “Upgrade of a UHV Furnace for 1700 C Heat Treatment and Processing of Niobium Samples”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3709-3711. doi:10.18429/JACoW-IPAC2016-THPMY024
For LaTeX
Use Complete Form
For BibTeX
References
- J. D. Sedillo, “Resolver-Based, Closed-Loop Position and Velocity Control for the LANSCE-R Wire Scanner”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM015, pp. 137-140.
- C. Z. Antoine et al., “Dust Contamination During Chemical Treatment of RF Cavities: Symptoms and Cures”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91E09, pp. XX-XX.
- T. Kuerzeder, M. Arnold, L. E. Juergensen, J. Pforr, N. Pietralla, and F. Hug, “Beam Break-up Measurements at the Recirculating Electron Accelerator S-DALINAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1714-1716.
- G. Joshi, T. Ananthkrishnan, S. K. Bharade, P. M. Paresh, C. K. Pithawa, and C. I. Sujo, “RF Control System for 400 keV RFQ”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper FRCB03, pp. 260-262.
- V. E. Blinov, V. A. Lebedev, A. V. Matveev, V. A. Tayursky, and A. A. Zholents, “Synchrotron Radiation Masking on Asymmetric 6.5 x 4.3- GeV B-factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2342-2345.
- J. Brossard et al., “Low Energy Beam Measurements Using PHIL Accelerator at LAL, Comparison with PARMELA Simulations”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP210, pp. 1885-1887.
- C. Schmidt, R. Noble, J. Palkovic, and F. Mills, “Redesign of the Low Energy Section of the Fermilab Linac to Improve Beam Brightness”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-56, pp. 188-189.
- R. Nagaoka et al., “Study of Upgrade Scenarios for the SOLEIL Storage Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 203-205.
- J. Conrad et al., “Upgrade of a UHV Furnace for 1700 C Heat Treatment and Processing of Niobium Samples”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3709-3711.
Back to search