Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y.-S. Cheng et al., “Waveform and Spectrum Acquisition for the TLS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB017, pp. 2722-2724.
[n] H. Geng, C. Meng, Y. F. Sui, F. Yan, L. Yu, and Y. L. Zhao, “Emittance Measurement with Wire Scanners at C-ADS Injector-I”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 910-912. doi:10.18429/JACoW-IPAC2016-MOPOY027
[n] F. Zakerhosseini, H. Afarideh, S. Sabounchi, J.-S. Chai, and M. Ghergherehchi, “Heat Transfer Study of PIG Ion Source for 10 MeV Cyclotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1256-1258. doi:10.18429/JACoW-IPAC2016-TUPMR013
[n] K. L. Tsai et al., “Dual One-turn Coils for TLS Extraction Kicker Magnet”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC034, pp. 1796-1798.
[n] Y. Xie, A. Kanareykin, N. Solyak, and V. P. Yakovlev, “Development of a Quarter-wave Coaxial Coupler for 1.3 GHz Superconducting Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2675-2677. doi:10.18429/JACoW-IPAC2014-WEPRI078
[n] Y. Xie et al., “Demonstration of Coaxial Coupling Scheme at 26 MV/m for 1.3 GHz TESLA-type SRF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3594-3596. doi:10.18429/JACoW-IPAC2015-WEPWI046
[n] Y. K. Chen et al., “Application of Modbus-TCP in TPS Control System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB016, pp. 2719-2721.
[n] D. C. Zhu, J. S. Cao, Y. F. Sui, J. H. Yue, and J. Chen, “Beam Profile Measurement Using Kirkpatrick Baez Mirror Optics at Shanghai Synchrotron Radiation Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 167-170. doi:10.18429/JACoW-IPAC2016-MOPMB036
[n] H. Geng et al., “Lattice and its Related Beam Dynamics Issues in the CEPC Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2469-2471. doi:10.18429/JACoW-IPAC2015-WEBB3
[n] L. Yu, Y. F. Sui, J. X. Zhao, and D. C. Zhu, “Design and Application of Double-slit Emittance Meter for C-ADS Proton Beams”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 164-166. doi:10.18429/JACoW-IPAC2016-MOPMB034
[n] Z. Wang, C. Feng, Q. Gu, Z. T. Zhao, and L. Yu, “Operating Cascaded High-gain Harmonic Generation with Double-pulse Electron Beams”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1661-1664. doi:10.18429/JACoW-IPAC2015-TUPJE019
[n] K. L. Tsai et al., “Performance of a PFN Kicker Power Supply for TPS Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD094, pp. 3317-3319.
[n] T. Morishita et al., “Fabrication of the New RFQ for the J-PARC Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD044, pp. 783-785.
[n] M. Newton, D. Barrett, C. Ollis, and D. Pendleton, “Energy Flow and High Repetition Rate Issues for the ETA-II Magnetic Modulator System”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH425, pp. 653-655.
[n] X. Yang et al., “Interferometric Measurement of Bunch Length of a 3Mev Picocoulomb Electron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2766-2769. doi:10.18429/JACoW-IPAC2019-WEPGW114
[n] Y. Y. Du, J. S. Cao, and Q. Ye, “Design and Construction of a Remote Control for the CADS Digital Power Supplies”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 498-500. doi:10.18429/JACoW-IPAC2014-MOPME055
[n] S. H. Liu et al., “Commissioning of China ADS Demo Linac and Baseline Design of CiADS Project”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 112-116. doi:10.18429/JACoW-HIAT2018-WEYAA01
[n] M. X. Xu et al., “The Superconducting CH Cavity Development in IMP”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB028, pp. 74-76.
[n] X. Y. Zhang et al., “Preliminary Design of 325 MHz Half-Wave Resonator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO025, pp. 2369-2371.
[n] Q. Y. Deng, J. S. Cao, and J. Yue, “Beam Trip Analysis by Bunch-by-bunch BPM System in BEPCII”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2779-2782. doi:10.18429/JACoW-IPAC2014-THOAA01
[n] L. J. Chen et al., “Optimization of Staggered Array Undulator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4171-4173. doi:10.18429/JACoW-IPAC2019-THPTS029
[n] A. Arzumanov, A. Borisenko, and S. Lysukhin, “Energy Calibration and Energy Spread Measurements of the 1 MV Tandem Accelerator at Alma-Ata”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 495-498.
[n] F. S. He et al., “Status of the Superconducting Cavity Development at IHEP for the CADS Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3824-3826. doi:10.18429/JACoW-IPAC2015-THPF055
[n] I. Pinayev, D. Kayran, V. Litvinenko, and G. Wang, “Measuring Beam Energy with Solenoid”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 47-49. doi:10.18429/JACoW-IBIC2017-MOPCC05
[n] X. Y. Huang et al., “An Alternative Fast Orbit Feedback Design of HEPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1888-1890. doi:10.18429/JACoW-IPAC2018-WEPAF032
[n] Y. Xie, G. H. Hoffstaetter, and M. Liepe, “Quench and High Field Q-SLOP Studies using a Single Cell Cavity with Artificial Pits”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO071, pp. 2465-2467.
[n] Q. Qin et al., “Recent Experimental Study on ECI at the BEPC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15005, pp. XX-XX.
[n] S. Sabounchi, H. Afarideh, M. Mohamadian, M. Salehi, J.-S. Chai, and M. Ghergherehchi, “Cooling and Heat Transfer of the IRANCYC-10 Transmission Line”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1259-1261. doi:10.18429/JACoW-IPAC2016-TUPMR015
[n] C. Feng et al., “Measurement of the Local Energy Spread of Electron Beam at SDUV-FEL”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEOBB01, pp. 2143-2145.
[n] C. P. Welsch, “Advances in Diagnostics for Medical Accelerators”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 37-40. doi:10.18429/JACoW-IBIC2017-MOPCC01
[n] P. F. Wang, J. S. Cao, and Q. Ye, “High Availability Software Architecture of C-ADS Control System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3153-3155. doi:10.18429/JACoW-IPAC2014-THPRO110
[n] J. H. Yue, Q. Y. Deng, J. Hu, S. J. Wei, and Q. Ye, “Phase and Energy Measurement System for C-ADS Injector I”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 95-97. doi:10.18429/JACoW-IBIC2015-MOPB026
[n] Y. L. Huang, Y. He, H. Jia, Y. S. Qin, Z. J. Wang, and Z. L. Zhang, “Deflecting Cavities for Proton Beam Spreader in CiADS Project”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 445. doi:10.18429/JACoW-SRF2021-TUPCAV004
[n] N. Tosi, “The CMS Beam Halo Monitor at the LHC: Implementation and First Measurements”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 364-367. doi:10.18429/JACoW-IBIC2016-TUPG20
[n] Y. Xie and M. Liepe, “First Results on Cornell TE-type Sample Host Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC082, pp. 2402-2404.
[n] M. Mohamadian, H. Afarideh, M. Salehi, J.-S. Chai, and M. Ghergherehchi, “Development of Optimized RF Cavity in 10 MeV Cyclotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1250-1252. doi:10.18429/JACoW-IPAC2016-TUPMR011
[n] P.-C. Chiu, K.-T. Hsu, J.-C. Huang, S.-H. Lee, and C. Wu, “Refinement of tune monitor in TPS booster”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6658, unpublished.
[n] J. Dai et al., “Post Processing of Spoke Type Superconducting Cavities at Institute of High Energy Physics”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2191-2193. doi:10.18429/JACoW-IPAC2016-WEPMB031
[n] H. J. Zheng, J. Gao, and Y. Wang, “CEPC Bunch Lengthening and Cavity HOM Analysis”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3805-3807. doi:10.18429/JACoW-IPAC2016-THPOR015
[n] J. Q. Wang, Z. Y. Guo, Q. Qin, and J. Xing, “Collective Effects Study for BEPCII”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI017, pp. 1583-1585.
[n] X. Yang et al., “A Novel Nondestructive Diagnostic Method for MeV Ultrafast Electron Diffraction”, in Proc. IPAC'20, Caen, France, May 2020, pp. 67. doi:10.18429/JACoW-IPAC2020-WEVIR16
[n] H. Jia and M. A. Plum, “Fringe Field Overlap Model for Quadrupoles”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 99-102. doi:10.18429/JACoW-SAP2017-MOPH31
[n] Z. C. Liu, J. Gao, S. Jin, Y. Wang, and H. J. Zheng, “High HOM Damping Structure Study for CEPC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2183-2185. doi:10.18429/JACoW-IPAC2016-WEPMB028
For LaTeX
Use Complete Form
For BibTeX
References
- Y.-S. Cheng et al., “Waveform and Spectrum Acquisition for the TLS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB017, pp. 2722-2724.
- H. Geng, C. Meng, Y. F. Sui, F. Yan, L. Yu, and Y. L. Zhao, “Emittance Measurement with Wire Scanners at C-ADS Injector-I”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 910-912.
- F. Zakerhosseini, H. Afarideh, S. Sabounchi, J.-S. Chai, and M. Ghergherehchi, “Heat Transfer Study of PIG Ion Source for 10 MeV Cyclotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1256-1258.
- K. L. Tsai et al., “Dual One-turn Coils for TLS Extraction Kicker Magnet”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC034, pp. 1796-1798.
- Y. Xie, A. Kanareykin, N. Solyak, and V. P. Yakovlev, “Development of a Quarter-wave Coaxial Coupler for 1.3 GHz Superconducting Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2675-2677.
- Y. Xie et al., “Demonstration of Coaxial Coupling Scheme at 26 MV/m for 1.3 GHz TESLA-type SRF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3594-3596.
- Y. K. Chen et al., “Application of Modbus-TCP in TPS Control System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB016, pp. 2719-2721.
- D. C. Zhu, J. S. Cao, Y. F. Sui, J. H. Yue, and J. Chen, “Beam Profile Measurement Using Kirkpatrick Baez Mirror Optics at Shanghai Synchrotron Radiation Facility”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 167-170.
- H. Geng et al., “Lattice and its Related Beam Dynamics Issues in the CEPC Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2469-2471.
- L. Yu, Y. F. Sui, J. X. Zhao, and D. C. Zhu, “Design and Application of Double-slit Emittance Meter for C-ADS Proton Beams”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 164-166.
- Z. Wang, C. Feng, Q. Gu, Z. T. Zhao, and L. Yu, “Operating Cascaded High-gain Harmonic Generation with Double-pulse Electron Beams”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1661-1664.
- K. L. Tsai et al., “Performance of a PFN Kicker Power Supply for TPS Project”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD094, pp. 3317-3319.
- T. Morishita et al., “Fabrication of the New RFQ for the J-PARC Linac”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD044, pp. 783-785.
- M. Newton, D. Barrett, C. Ollis, and D. Pendleton, “Energy Flow and High Repetition Rate Issues for the ETA-II Magnetic Modulator System”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH425, pp. 653-655.
- X. Yang et al., “Interferometric Measurement of Bunch Length of a 3Mev Picocoulomb Electron Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2766-2769.
- Y. Y. Du, J. S. Cao, and Q. Ye, “Design and Construction of a Remote Control for the CADS Digital Power Supplies”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 498-500.
- S. H. Liu et al., “Commissioning of China ADS Demo Linac and Baseline Design of CiADS Project”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 112-116.
- M. X. Xu et al., “The Superconducting CH Cavity Development in IMP”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB028, pp. 74-76.
- X. Y. Zhang et al., “Preliminary Design of 325 MHz Half-Wave Resonator”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO025, pp. 2369-2371.
- Q. Y. Deng, J. S. Cao, and J. Yue, “Beam Trip Analysis by Bunch-by-bunch BPM System in BEPCII”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2779-2782.
- L. J. Chen et al., “Optimization of Staggered Array Undulator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4171-4173.
- A. Arzumanov, A. Borisenko, and S. Lysukhin, “Energy Calibration and Energy Spread Measurements of the 1 MV Tandem Accelerator at Alma-Ata”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 495-498.
- F. S. He et al., “Status of the Superconducting Cavity Development at IHEP for the CADS Linac”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3824-3826.
- I. Pinayev, D. Kayran, V. Litvinenko, and G. Wang, “Measuring Beam Energy with Solenoid”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 47-49.
- X. Y. Huang et al., “An Alternative Fast Orbit Feedback Design of HEPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1888-1890.
- Y. Xie, G. H. Hoffstaetter, and M. Liepe, “Quench and High Field Q-SLOP Studies using a Single Cell Cavity with Artificial Pits”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO071, pp. 2465-2467.
- Q. Qin et al., “Recent Experimental Study on ECI at the BEPC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15005, pp. XX-XX.
- S. Sabounchi, H. Afarideh, M. Mohamadian, M. Salehi, J.-S. Chai, and M. Ghergherehchi, “Cooling and Heat Transfer of the IRANCYC-10 Transmission Line”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1259-1261.
- C. Feng et al., “Measurement of the Local Energy Spread of Electron Beam at SDUV-FEL”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEOBB01, pp. 2143-2145.
- C. P. Welsch, “Advances in Diagnostics for Medical Accelerators”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 37-40.
- P. F. Wang, J. S. Cao, and Q. Ye, “High Availability Software Architecture of C-ADS Control System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3153-3155.
- J. H. Yue, Q. Y. Deng, J. Hu, S. J. Wei, and Q. Ye, “Phase and Energy Measurement System for C-ADS Injector I”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 95-97.
- Y. L. Huang, Y. He, H. Jia, Y. S. Qin, Z. J. Wang, and Z. L. Zhang, “Deflecting Cavities for Proton Beam Spreader in CiADS Project”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 445.
- N. Tosi, “The CMS Beam Halo Monitor at the LHC: Implementation and First Measurements”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 364-367.
- Y. Xie and M. Liepe, “First Results on Cornell TE-type Sample Host Cavities”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC082, pp. 2402-2404.
- M. Mohamadian, H. Afarideh, M. Salehi, J.-S. Chai, and M. Ghergherehchi, “Development of Optimized RF Cavity in 10 MeV Cyclotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1250-1252.
- P.-C. Chiu, K.-T. Hsu, J.-C. Huang, S.-H. Lee, and C. Wu, “Refinement of tune monitor in TPS booster”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6658, this conference.
- J. Dai et al., “Post Processing of Spoke Type Superconducting Cavities at Institute of High Energy Physics”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2191-2193.
- H. J. Zheng, J. Gao, and Y. Wang, “CEPC Bunch Lengthening and Cavity HOM Analysis”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3805-3807.
- J. Q. Wang, Z. Y. Guo, Q. Qin, and J. Xing, “Collective Effects Study for BEPCII”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI017, pp. 1583-1585.
- X. Yang et al., “A Novel Nondestructive Diagnostic Method for MeV Ultrafast Electron Diffraction”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 67.
- H. Jia and M. A. Plum, “Fringe Field Overlap Model for Quadrupoles”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 99-102.
- Z. C. Liu, J. Gao, S. Jin, Y. Wang, and H. J. Zheng, “High HOM Damping Structure Study for CEPC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2183-2185.
Back to search