Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. He, K. X. Liu, Z. Ni, D. Xie, and Q. Feng, “1010mm2 MgB2 Film Fabricated by HPCVD as a Candidate Material for SRF Cavit”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO028, pp. 2375-2377.
[n] C. Mayes, D. Sagan, and H. Slepicka, “PyTao: the Python interface to Tao”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2838-2841. doi:10.18429/JACoW-IPAC2023-WEPA086
[n] M. Guijarro, “BLISS at the heart of ESRF Data Acquisition”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper TUPV043, unpublished.
[n] D. Raparia, L. W. Funk, F. W. Guy, and G. T. Leifeste, “SSC Drift-Tube Linac Design”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-55, pp. 199-201.
[n] F. Roncarolo, U. Raich, and F. Zocca, “Commissioning of the CERN LINAC4 Wire Scanner, Wire Grid and Slit-Grid Monitors at 3 and 12 MeV”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP034, pp. 502-505.
[n] R. Than et al., “Cryogenic Vertical Test Facility for the SRF Cavities at BNL”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP224, pp. 1238-1240.
[n] B. Yee-Rendon, Y. Kondo, J. Tamura, and F. Maekawa, “Beam transient studies for the JAEA-ADS LEBT”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 488-491. doi:10.18429/JACoW-LINAC2024-TUPB076
[n] A. Nadji, “Status of SESAME Project”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC043, pp. 2999-3001.
[n] Y. F. Wang, W. Lei, and J. Y. Tang, “Consideration of HIRFL Vacuum Pressure”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-41, pp. 301-304.
[n] J. Gronberg, A. Seryi, and B. Stuart, “Development of High Average Power Lasers for the Photon Collider”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE035, pp. 3434-3436.
[n] X. Y. Wu and M. M. Gordon, “Magnetic Channel Design for a 250 MeV Superconducting Synchrocyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F6-09, pp. 361-364.
[n] M. Sassowsky et al., “Steel Septum Magnets for the LHC Beam Injection and Extraction”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE083, pp. 2514-2516.
[n] S. Friederich and K. Aulenbacher, “Test electron source for increased brightness emission by near band gap photoemission”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1512-1514. doi:10.18429/JACoW-IPAC2015-TUPWA044
[n] S. Q. Tian, B. C. Jiang, H. H. Li, M. Z. Zhang, W. Z. Zhang, and Z. T. Zhao, “Lattice Design of the SSRF Storage Ring with Superbend”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP017, pp. 1644-1646.
[n] A. T. Young, P. Chen, W. B. Kunkel, K. N. Leung, C. Y. Li, and J. Watson, “Quantum Yield Measurements of Photocathodes Illuminated by Pulsed Ultraviolet Laser Radiation”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1993-1996.
[n] H. Maesaka et al., “Development of Beam Diagnostic System for the SPring-8 Upgrade”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 149-151. doi:10.18429/JACoW-IPAC2016-MOPMB028
[n] H. S. Marks et al., “Improvement of a Wiggler by Single Axis Magnetic Measurement, Virtual Synthesis, and Relocation of Magnets”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC08, pp. 513-516.
[n] R. Rimmer, H. Wang, and G. Wu, “Strongly HOM-Damped Multi-cell RF Cavities for High-current Applications”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP36, pp. 392-396.
[n] M. Valette, P. A. P. Nghiem, and N. Pichoff, “Core-halo Limits and Beam Halo-formation Dynamic”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3417-3419. doi:10.18429/JACoW-IPAC2016-THPMR014
[n] S. Lee, Y.-S. Cho, H. S. Kim, and H.-J. Kwon, “Installation, Commissioning and Characterization of EBIS-SC as a Short Pulsed Proton Source at KOMAC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1721-1723. doi:10.18429/JACoW-IPAC2018-TUPML076
[n] F. Burkart et al., “The ARES Linac at DESY”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 691-694. doi:10.18429/JACoW-LINAC2022-THPOJO01
[n] G. Meister, R. Nabbi, and S. A. Martin, “On Optimization of Collimator Systems Used for Control of Beam Losses in Linear Accelerators”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0026, pp. 397-399.
[n] R. J. Burke and M. H. Foss, “A Rapid Cycling Synchrotron Magnet with Separate AC and DC Circuits”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4021-4024.
[n] U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Investigation of Structural Development in the Two-Step Diffusion Coating of Nb3Sn on Niobium”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 659-662. doi:10.18429/JACoW-NAPAC2016-WEB1CO02
[n] R. E. Worsham, “Preliminary Design of the R-F System for ORIC”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59C04, pp. 150-158.
[n] L. Andolfato et al., “The ELT M1 Local Control Software: From Requirements to Implementation”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 38. doi:10.18429/JACoW-ICALEPCS2019-MOBPP04
[n] I. Bekman et al., “Experience and Prospects of Real-Time Signal Processing and Representation for the Beam Diagnostics at COSY”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 970-972. doi:10.18429/JACoW-ICALEPCS2017-TUPHA213
[n] A. Gotz et al., “TANGO V8 - Another Turbo Charged Major Release”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCB10, pp. 978-981.
[n] H. Zen, T. Kii, K. Masuda, T. Nakajima, and H. Ohgaki, “Pulse Duration Measurement of Pico-second DUV Photocathode Driving Laser by Autocorrelation Technique Using Two-Photon Absorption in Bulk Material”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 447-449. doi:10.18429/JACoW-FEL2017-WEP014
[n] Z. A. Conway et al., “Reduced-beta Cavities for High-intensity Compact Accelerators”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPLB07, pp. 458-460.
[n] E. A. Wadlinger, “General-Purpose RFQ Design Program”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0004, pp. 330-331.
[n] M. Vaz, A. M. Cascadan, V. F. Ferreira, T. Paiva, L. A. Ramalho, and A. A. Shinoda, “A Framework for Development and Test of xTCA Modules With FPGA Based Systems for Particle Detectors”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 88-90. doi:10.18429/JACoW-PCAPAC2016-THDAPLCO06
[n] M. Dusek, J.-C. Gayde, and M. Sulc, “Generation of symmetrical optical caustic beams for precise alignment”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3333-3336. doi:10.18429/JACoW-IPAC2024-THPG35
[n] H. G. Blosser, D. Johnson, E. Kashy, B. F. Milton, and J. Riedel, “Superconducting Cyclotrons for Neutron Therapy”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J31, pp. 436-439.
[n] V. Kain et al., “Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1367-1370. doi:10.18429/JACoW-IPAC2016-TUPMR050
[n] J. Meyer et al., “Upgrading the ESRF Control System after 10 Years of Operation”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU615, pp. XX-XX.
[n] T. L. Hart, J. G. Acosta, L. M. Cremaldi, S. J. Oliveros, D. J. Summers, and D. V. Neuffer, “Final 6d Muon Ionization Cooling Using Strong Focusing Quadrupoles”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 592-595. doi:10.18429/JACoW-NAPAC2016-TUPOB44
[n] G. Guignard, K. Potter, and A. Verdier, “Interaction Regions for e-p and p-p Collisions in the LEP Tunnel”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2535-2538.
[n] S. J. Zhao et al., “A New Fast RF Trip Diagnostic System in SSRF”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4182-4184. doi:10.18429/JACoW-IPAC2016-THPOY036
[n] P. V. Verdier, “Re-Writing TANGO Code Generator Using openArchitectureWare Technology”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP080, pp. 827-829.
For LaTeX
Use Complete Form
For BibTeX
References
- F. He, K. X. Liu, Z. Ni, D. Xie, and Q. Feng, “1010mm2 MgB2 Film Fabricated by HPCVD as a Candidate Material for SRF Cavit”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWO028, pp. 2375-2377.
- C. Mayes, D. Sagan, and H. Slepicka, “PyTao: the Python interface to Tao”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA086, pp. 2838-2841.
- M. Guijarro, “BLISS at the heart of ESRF Data Acquisition”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper TUPV043, unpublished.
- D. Raparia, L. W. Funk, F. W. Guy, and G. T. Leifeste, “SSC Drift-Tube Linac Design”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-55, pp. 199-201.
- F. Roncarolo, U. Raich, and F. Zocca, “Commissioning of the CERN LINAC4 Wire Scanner, Wire Grid and Slit-Grid Monitors at 3 and 12 MeV”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP034, pp. 502-505.
- R. Than et al., “Cryogenic Vertical Test Facility for the SRF Cavities at BNL”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP224, pp. 1238-1240.
- B. Yee-Rendon, Y. Kondo, J. Tamura, and F. Maekawa, “Beam transient studies for the JAEA-ADS LEBT”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 488-491.
- A. Nadji, “Status of SESAME Project”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC043, pp. 2999-3001.
- Y. F. Wang, W. Lei, and J. Y. Tang, “Consideration of HIRFL Vacuum Pressure”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-41, pp. 301-304.
- J. Gronberg, A. Seryi, and B. Stuart, “Development of High Average Power Lasers for the Photon Collider”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE035, pp. 3434-3436.
- X. Y. Wu and M. M. Gordon, “Magnetic Channel Design for a 250 MeV Superconducting Synchrocyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F6-09, pp. 361-364.
- M. Sassowsky et al., “Steel Septum Magnets for the LHC Beam Injection and Extraction”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE083, pp. 2514-2516.
- S. Friederich and K. Aulenbacher, “Test electron source for increased brightness emission by near band gap photoemission”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1512-1514.
- S. Q. Tian, B. C. Jiang, H. H. Li, M. Z. Zhang, W. Z. Zhang, and Z. T. Zhao, “Lattice Design of the SSRF Storage Ring with Superbend”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP017, pp. 1644-1646.
- A. T. Young, P. Chen, W. B. Kunkel, K. N. Leung, C. Y. Li, and J. Watson, “Quantum Yield Measurements of Photocathodes Illuminated by Pulsed Ultraviolet Laser Radiation”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1993-1996.
- H. Maesaka et al., “Development of Beam Diagnostic System for the SPring-8 Upgrade”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 149-151.
- H. S. Marks et al., “Improvement of a Wiggler by Single Axis Magnetic Measurement, Virtual Synthesis, and Relocation of Magnets”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC08, pp. 513-516.
- R. Rimmer, H. Wang, and G. Wu, “Strongly HOM-Damped Multi-cell RF Cavities for High-current Applications”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP36, pp. 392-396.
- M. Valette, P. A. P. Nghiem, and N. Pichoff, “Core-halo Limits and Beam Halo-formation Dynamic”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3417-3419.
- S. Lee, Y.-S. Cho, H. S. Kim, and H.-J. Kwon, “Installation, Commissioning and Characterization of EBIS-SC as a Short Pulsed Proton Source at KOMAC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1721-1723.
- F. Burkart et al., “The ARES Linac at DESY”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 691-694.
- G. Meister, R. Nabbi, and S. A. Martin, “On Optimization of Collimator Systems Used for Control of Beam Losses in Linear Accelerators”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0026, pp. 397-399.
- R. J. Burke and M. H. Foss, “A Rapid Cycling Synchrotron Magnet with Separate AC and DC Circuits”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4021-4024.
- U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Investigation of Structural Development in the Two-Step Diffusion Coating of Nb3Sn on Niobium”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 659-662.
- R. E. Worsham, “Preliminary Design of the R-F System for ORIC”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59C04, pp. 150-158.
- L. Andolfato et al., “The ELT M1 Local Control Software: From Requirements to Implementation”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 38.
- I. Bekman et al., “Experience and Prospects of Real-Time Signal Processing and Representation for the Beam Diagnostics at COSY”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 970-972.
- A. Gotz et al., “TANGO V8 - Another Turbo Charged Major Release”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCB10, pp. 978-981.
- H. Zen, T. Kii, K. Masuda, T. Nakajima, and H. Ohgaki, “Pulse Duration Measurement of Pico-second DUV Photocathode Driving Laser by Autocorrelation Technique Using Two-Photon Absorption in Bulk Material”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 447-449.
- Z. A. Conway et al., “Reduced-beta Cavities for High-intensity Compact Accelerators”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPLB07, pp. 458-460.
- E. A. Wadlinger, “General-Purpose RFQ Design Program”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0004, pp. 330-331.
- M. Vaz, A. M. Cascadan, V. F. Ferreira, T. Paiva, L. A. Ramalho, and A. A. Shinoda, “A Framework for Development and Test of xTCA Modules With FPGA Based Systems for Particle Detectors”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 88-90.
- M. Dusek, J.-C. Gayde, and M. Sulc, “Generation of symmetrical optical caustic beams for precise alignment”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG35, pp. 3333-3336.
- H. G. Blosser, D. Johnson, E. Kashy, B. F. Milton, and J. Riedel, “Superconducting Cyclotrons for Neutron Therapy”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J31, pp. 436-439.
- V. Kain et al., “Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1367-1370.
- J. Meyer et al., “Upgrading the ESRF Control System after 10 Years of Operation”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU615, pp. XX-XX.
- T. L. Hart, J. G. Acosta, L. M. Cremaldi, S. J. Oliveros, D. J. Summers, and D. V. Neuffer, “Final 6d Muon Ionization Cooling Using Strong Focusing Quadrupoles”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 592-595.
- G. Guignard, K. Potter, and A. Verdier, “Interaction Regions for e-p and p-p Collisions in the LEP Tunnel”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2535-2538.
- S. J. Zhao et al., “A New Fast RF Trip Diagnostic System in SSRF”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4182-4184.
- P. V. Verdier, “Re-Writing TANGO Code Generator Using openArchitectureWare Technology”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP080, pp. 827-829.
Back to search