JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Nagaitsev, “Review of Recent Advances in Cooling Techniques”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper FRXBA1, unpublished. 
[n]	Y. K. Batygin and F. Marti, “Beam Funneling in the Facility for Rare Isotope Beams”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP120, pp. 5062-5064. 
[n]	I. Meshkov, A. Sidorin, A. Smirnov, E. Syresin, G. Trubnikov, and P. Zenkevich, “NUMERICAL SIMULATION OF PARTICLE DYNAMICS IN STORAGE RINGS USING BETACOOL CODE”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBI04, pp. XX-XX. 
[n]	G. Papotti, G. Cipolla, and K. Li, “RF power margin for operation with fixed-target in the CERN SPS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS027, unpublished. 
[n]	A. Zelinsky, O. Bykhun, P. Gladkikh, I. Karnaukhov, and A. Mytsykov, “The results of the NSC KIPT subcritical assembly neutron source facility physical start up”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1633-1636. doi:10.18429/JACoW-IPAC2023-TUPA147
[n]	T. Junquera, “SRF Activities at the IPN-LAL (CNRS Orsay) Laboratories”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A21, pp. 204-208. 
[n]	C. Kim, “Simulation of Emittance Growth in the ALS Pre-Injector”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-47, pp. 427-429. 
[n]	C. Su, X. Chen, Y. Jia, X. Qi, D. Jia, and Z. Wang, “Reinforcement control for LEBT and RFQ of linear accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2877-2880. doi:10.18429/JACoW-IPAC2023-WEPA099
[n]	J. I. Hirota, K. Hiramoto, M. Nishi, Y. Iwashita, A. Noda, and M. Inoue, “A Ferrite Loaded Untuned Cavity for a Compact Proton Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ21, pp. 1770-1772. 
[n]	J. Campmany et al., “Design of Front End and a 3-Pole-Wiggler as a Photon Source for BEATS Beamline at SESAME”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 324-326. doi:10.18429/JACoW-IPAC2021-MOPAB086
[n]	G. Bassi, “Analytical formulae for the longitudinal impedance of two parallel layers with arbitrary complex permittivity and permeability”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3428-3431. doi:10.18429/JACoW-IPAC2023-WEPL139
[n]	Y. Tanimoto, T. Nogami, and T. Obina, “Upgrade of the PF Ring Vacuum Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT049, pp. 3061-3063. 
[n]	S. Lindb?ñck and H. Lindqvist, “Injection in the VICKSI Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-03, pp. 226-230. 
[n]	F. L. Krawczyk, “Advanced Electromagnetic Design of Cavities for High Current Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPC22, pp. 2361-2363. 
[n]	V. Auslender et al., “Electron Accelerator for Energy up to 5.0 MeV and Beam Power up to 50 KW with X-ray Converter”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF050, pp. 2383-2385. 
[n]	J. Marcos, J. Campmany, and D. Einfeld, “The Study of Errors of ALBA Fixed Stretched Wire Bench”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS135, pp. 3601-3603. 
[n]	H. M. Milchberg, C.G. Durfee III, T. M. Antonsen, and P. Mora, “Channel Guided Lasers for Plasma Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAG04, pp. 621-625. 
[n]	J. W. Wang, S. G. Tantawi, and C. Xu, “Super-Compact SLED System Used in the LCLS Diagnostic System”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP125, pp. 1151-1154. 
[n]	V. J. Kovarik, R. F. Lankshear, and Th. Sluyters, “The Preinjector of the BNL 200 MeV Linear Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 87-90. 
[n]	Y. Li, “Laser Pulse Shaping”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper WG111, pp. 40-44. 
[n]	F. Wang et al., “Terahertz Coherent Synchrotron Radiation in the MIT-Bates South Hall Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE069, pp. 3783-3785. 
[n]	P. B. Cheblakov, A. V. Gerasev, S. E. Karnaev, and D. V. Senkov, “Power Supply Controller for Future Accelerator Facilities at BINP”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1146. doi:10.18429/JACoW-ICALEPCS2019-WEPHA028
[n]	J. Marcos et al., “Detailed Characterization of MEBT Quadrupoles for the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1151-1153. doi:10.18429/JACoW-IPAC2016-TUPMB019
[n]	S. A. Pande, R. Bartolini, R. T. Fielder, and M. Jensen, “Numerical Estimations of Wakefields and Impedances for Diamond Collimators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH042, pp. 2877-2879. 
[n]	P. Huelsmann and W. F. O. Mueller, “The Diffraction Model And Its Applicability for Wakefield Calculations”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOE06, pp. 278-280. 
[n]	D. Newton, “Modelling Synchrotron Radiation from Realistic and Ideal Long Undulator Systems”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD044, pp. 3189-3191. 
[n]	S. Krinsky and K. Bane, “Impedance of a Small-Gap Undulator Vacuum Chamber”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3375-3378. 
[n]	S. V. Melanson, M. P. Dehnel, C. Hollinger, J. A. Martin, D. E. Potkins, and C. Philpott, “A PID Control Algorithm for Filament-Powered Volume-Cusp Ion Sources”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2623-2624. doi:10.18429/JACoW-IPAC2016-WEPMY032
[n]	N. V. Kulabukhova, “Parallelization of Envelope Dynamics of High Intensive Beams”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 426-428. doi:10.18429/JACoW-RUPAC2016-WEPSB030
[n]	P. Emma, T. Raubenheimer, and F. Zimmermann, “A Bunch Compressor for the Next Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC03, pp. 704-706. 
[n]	D. Z. Xie, L. Phair, and D. S. Todd, “A Pathway to Accelerate Ion Beams up to 3 GeV with a K140 Cyclotron”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 119-122. doi:10.18429/JACoW-CYCLOTRONS2019-MOC02
[n]	A. D, V. G. Vaccaro, M. R. Masullo, D. Davino, and S. Falco, “Some Relevant Aspects in the Design and Construction of a 30-62 MeV Linac Booster for Proton Therapy”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP20, pp. 336-338. 
[n]	A. M. Baranov, P. E. Kondrashov, V. P. Petukhov, and I. S. Smirnov, “X-rays Produced by Means of a Proton Beam for Analysis of the Multilayer X-ray Mirrors”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP25C, pp. 2455-2457. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search