Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. Groening, M. T. Maier, C. Xiao, and O. K. Kester, “Emittance Transfer in Linacs”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper WEO3LR04, pp. 289-293.
[n] F. E. Hannon, A. S. Hofler, and R. Kazimi, “Optimizing the CEBAF Injector for Beam Operation with a Higher Voltage Electron Gun”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP288, pp. 2023-2025.
[n] F. M. Tilaro and B. Copy, “Assessment And Testing of Industrial Devices Robustness Against Cyber Security Attacks”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU029, pp. 1130-1133.
[n] N. Aoki, Y. Baba, H. Kimura, N. Kobayashi, and M. Kumada, “A Very Fast Kicker Magnet: A New Approach”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP27G, pp. 2272-2274.
[n] X. Li, X. Shen, and R. Zwarich, “LINAC Section 3 and 4 Replacement at the Canadian Light Source”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 266. doi:10.18429/JACoW-MEDSI2020-WEPB01
[n] M. A. Nozdrin, N. Balalykin, V. Minashkin, V. Y. Schegolev, G. Shirkov, and G. V. Trubnikov, “Development of the New Control Systems for JINR e- Linac Accelerator Test-Bench”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD039, pp. 626-628.
[n] J. Dietrich et al., “Status of 2 MeV Electron Cooler for COSY-Julich/HESR”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP229, pp. 1918-1920.
[n] R. F. Tusting, J. E. Katz, and Q. Kerns, “The Development of 2000 - Ampere Diodes for High Current Ferrite Biasing Supplies”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 320-328.
[n] H. Ohgaki, Y. Iwasaki, S. Koda, Y. Takabayashi, T. Tomimasu, and K. Yoshida, “Global COD Correction of SAGA-LS Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN044, pp. 3327-3329.
[n] Y. Higurashi et al., “Developments of RIKEN New Superconducting ECR Ion Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC060, pp. 4191-4193.
[n] G. Chen et al., “Performance of a Low Frequency QWR-Based SRF Gun”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 472. doi:10.18429/JACoW-SRF2021-TUPCAV015
[n] T. Fujisawa et al., “Design of Radio-Frequency System for the RIKEN Separated Sector Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2897-2900.
[n] N. N. Alexeev et al., “Upgrade of Heavy Ion Injector I-3 at ITEP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 346-348. doi:10.18429/JACoW-LINAC2018-TUPO011
[n] H. Yang, C. H. Shim, I. Nam, and M. Cho, “Electron bunch spacing for the FEL generation with a laser heater and collimators at PAL-XFEL”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG41, unpublished.
[n] S. Kashiwagi, G. Isoyama, R. Kato, H. Sasaki, K. Tsuchiya, and S. Yamamoto, “Study on Focusing Property of New Type Wiggler and SASE-FEL Experiment at the ISIR, Osaka University”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH040, pp. 672-675.
[n] D. Janssen et al., “A Superconducting RF Gun Current Status of the Drossel Collaboration”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA62, pp. 2033-2035.
[n] G. D'Auria, P. Craievich, R. J. Bakker, and S. D. Di Mitri, “Energy Spread in BTW Accelerating Structures at ELETTRA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP62, pp. 159-161.
[n] J. Qiang, “Efficient 3D Poisson Solvers or Space-charge Simulation”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB29, pp. 94-98.
[n] R. W. Assmann, F. J. Decker, M. Seidel, R. H. Siemann, and D. Whittum, “Observation of Dark-Current Signals from the S-Band Structures of the SLAC Linac”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W025, pp. 500-502.
[n] M. A. Al-Najdawi, “Thermomechanical Analysis of SESAME High-Heat-Load Front Ends Components”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 202-204. doi:10.18429/JACoW-MEDSI2018-WEPH02
[n] I. Zagorodnov and T. Weiland, “A Conformal Scheme for Wake Field Calculation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI075, pp. 1682-1684.
[n] Y. W. Kang, R. L. Kustom, and J. F. Bridges, “HOM Damping with Coaxial Dampers in a Pillbox Cavity Without the Fundamental Mode Frequency Rejection Filter”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 910-913.
[n] Y. Arakaki, S. Machida, Y. Mori, N. Tokuda, M. Tomizawa, and T. Watanabe, “Influence of Nonlinear Multipole Fields on Beam Loss in the Slow Extraction from JHF Main Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP08B, pp. 2143-2145.
[n] N. Yampolsky, E.-C. Huang, J. Quemuel, and A. Scheinker, “Early prediction of system failures at LANSCE”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPG55, unpublished.
[n] M. Kenda, A. Bardorfer, T. Beltram, and H. Kocevar, “Programming Interfaces for Reconfigurable Instruments”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL032, pp. 91-93.
[n] C. C. Xing, T. He, C. X. Li, J. Li, L. Lu, and L. Yang, “Design of Practical HSC Type Injector for Cancer Therapy”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 557-559. doi:10.18429/JACoW-LINAC2018-TUPO101
[n] M. Gusarova and I. I. Petrushina, “Influence of the Different Geometric Parameters of Superconducting Elliptical Cavities on the Multipactor”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC19, pp. 362-364.
[n] A. Schempp et al., “The Cryring RFQ for Heavy Ion Acceleration”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1231-1234.
[n] M. Eriksson et al., “Challenge of MAX IV Towards a Multi-Purpose Highly Brilliant Light Source”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOBS4, pp. 737-741.
[n] R. Assmann et al., “Energy Calibration with Resonant Depolarization at LEP in 1993”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 935-938.
[n] Y. Li, K. Hwang, C. E. Mitchell, R. S. Rainer, R. D. Ryne, and V. V. Smaluk, “Design of Double- and Multi-Bend Achromat Lattices with Large Dynamic Aperture and Approximate Invariants”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1945-1948. doi:10.18429/JACoW-IPAC2021-TUPAB223
[n] A. Schempp and H. Klein, “Spiral Loaded Cavities for Heavy Ion Acceleration”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B03, pp. 67-72.
[n] K. G. Andersen et al., “Construction and Installation of the New CERN Proton Synchrotron Internal Beam Dumps”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1409-1412. doi:10.18429/JACoW-IPAC2021-TUPAB031
[n] H. Chaloupka et al., “A Proposed Superconducting Photoemission Source of High Brightness”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G12, pp. XX-XX.
[n] A. L. Zhang et al., “DESIGN AND FABRICATION OF A ROTATING COIL MAGNETIC MEASUREMENT SYSTEM”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP029, pp. XX-XX.
[n] J. Safranek, “Experimental Determination of Linear Optics Including Quadrupole Rotations”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAB11, pp. 2817-2819.
[n] C. M. Celata et al., “Cyclotron Resonances in Electron Cloud Dynamics”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE1PBI03, pp. 1807-1811.
[n] D. Stratakis, J. S. Berg, R. B. Palmer, and V. Balbekov, “A High-Performance Rectilinear FOFO Channel for Muon Cooling”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO12, pp. 1328-1330.
[n] M. G. Abbott et al., “Implementation, Commissioning and Current Status of the Diamond Light Source Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAA05, pp. 56-58.
[n] J. Byrd, D. A. Goldberg, M. Irwin, and R. A. Rimmer, “Updated Impedance Estimate of the PEP-II RF Cavity”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP070L, pp. 2035-2037.
[n] E.-C. Huang, A. Braido, L. Rybarcyk, and P. Anisimov, “HPSim simulation of the highly bunched WNR beam at LANSCE”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3457-3460. doi:10.18429/JACoW-IPAC2024-THPG81
[n] L. G. Zhang, R. A. Baartman, Y. Bylinskii, T. Planche, and Y.-N. Rao, “Error Magnetic Field due to the Median Plane Asymmetry and Its Applications in the Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper FRBO04, pp. 381-384. doi:10.18429/JACoW-CYCLOTRONS2022-FRBO04
[n] S. Barbanotti et al., “Connection of EU-XFEL Cryomodules, Caps, Boxes in EU-XFEL Main Linac and Injector: Welding of Cryo-Pipes and Assembly of Beam-Line Absorbers Under Requirements of PED Regulation”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB108, pp. 883-887.
[n] Y. G. Son, S. D. Jang, J. S. Oh, M. H. Cho, and W. Namkung, “A Study of High-Power Switch With Thyrister For Pulse Power Applications”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO468, pp. 199-201.
[n] S. Barbanotti, A. Bellandi, J. Branlard, and K. Jensch, “Modal Analysis of the EXFEL 1.3 GHz Cavity and Cryomodule Main Components and Comparison with Measured Data”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 488-492. doi:10.18429/JACoW-SRF2019-TUP033
[n] M. Böge, J. Chrin, M. Muñoz, and A. Streun, “Commissioning of the SLS Using CORBA Based Beam Dynamics Applications”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPB012, pp. 292-294.
For LaTeX
Use Complete Form
For BibTeX
References
- L. Groening, M. T. Maier, C. Xiao, and O. K. Kester, “Emittance Transfer in Linacs”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper WEO3LR04, pp. 289-293.
- F. E. Hannon, A. S. Hofler, and R. Kazimi, “Optimizing the CEBAF Injector for Beam Operation with a Higher Voltage Electron Gun”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP288, pp. 2023-2025.
- F. M. Tilaro and B. Copy, “Assessment And Testing of Industrial Devices Robustness Against Cyber Security Attacks”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU029, pp. 1130-1133.
- N. Aoki, Y. Baba, H. Kimura, N. Kobayashi, and M. Kumada, “A Very Fast Kicker Magnet: A New Approach”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP27G, pp. 2272-2274.
- X. Li, X. Shen, and R. Zwarich, “LINAC Section 3 and 4 Replacement at the Canadian Light Source”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 266.
- M. A. Nozdrin, N. Balalykin, V. Minashkin, V. Y. Schegolev, G. Shirkov, and G. V. Trubnikov, “Development of the New Control Systems for JINR e- Linac Accelerator Test-Bench”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPD039, pp. 626-628.
- J. Dietrich et al., “Status of 2 MeV Electron Cooler for COSY-Julich/HESR”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP229, pp. 1918-1920.
- R. F. Tusting, J. E. Katz, and Q. Kerns, “The Development of 2000 - Ampere Diodes for High Current Ferrite Biasing Supplies”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 320-328.
- H. Ohgaki, Y. Iwasaki, S. Koda, Y. Takabayashi, T. Tomimasu, and K. Yoshida, “Global COD Correction of SAGA-LS Storage Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN044, pp. 3327-3329.
- Y. Higurashi et al., “Developments of RIKEN New Superconducting ECR Ion Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC060, pp. 4191-4193.
- G. Chen et al., “Performance of a Low Frequency QWR-Based SRF Gun”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 472.
- T. Fujisawa et al., “Design of Radio-Frequency System for the RIKEN Separated Sector Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2897-2900.
- N. N. Alexeev et al., “Upgrade of Heavy Ion Injector I-3 at ITEP”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 346-348.
- H. Yang, C. H. Shim, I. Nam, and M. Cho, “Electron bunch spacing for the FEL generation with a laser heater and collimators at PAL-XFEL”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG41, unpublished.
- S. Kashiwagi, G. Isoyama, R. Kato, H. Sasaki, K. Tsuchiya, and S. Yamamoto, “Study on Focusing Property of New Type Wiggler and SASE-FEL Experiment at the ISIR, Osaka University”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH040, pp. 672-675.
- D. Janssen et al., “A Superconducting RF Gun Current Status of the Drossel Collaboration”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA62, pp. 2033-2035.
- G. D'Auria, P. Craievich, R. J. Bakker, and S. D. Di Mitri, “Energy Spread in BTW Accelerating Structures at ELETTRA”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP62, pp. 159-161.
- J. Qiang, “Efficient 3D Poisson Solvers or Space-charge Simulation”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB29, pp. 94-98.
- R. W. Assmann, F. J. Decker, M. Seidel, R. H. Siemann, and D. Whittum, “Observation of Dark-Current Signals from the S-Band Structures of the SLAC Linac”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8W025, pp. 500-502.
- M. A. Al-Najdawi, “Thermomechanical Analysis of SESAME High-Heat-Load Front Ends Components”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 202-204.
- I. Zagorodnov and T. Weiland, “A Conformal Scheme for Wake Field Calculation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI075, pp. 1682-1684.
- Y. W. Kang, R. L. Kustom, and J. F. Bridges, “HOM Damping with Coaxial Dampers in a Pillbox Cavity Without the Fundamental Mode Frequency Rejection Filter”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 910-913.
- Y. Arakaki, S. Machida, Y. Mori, N. Tokuda, M. Tomizawa, and T. Watanabe, “Influence of Nonlinear Multipole Fields on Beam Loss in the Slow Extraction from JHF Main Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP08B, pp. 2143-2145.
- N. Yampolsky, E.-C. Huang, J. Quemuel, and A. Scheinker, “Early prediction of system failures at LANSCE”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG55, unpublished.
- M. Kenda, A. Bardorfer, T. Beltram, and H. Kocevar, “Programming Interfaces for Reconfigurable Instruments”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL032, pp. 91-93.
- C. C. Xing, T. He, C. X. Li, J. Li, L. Lu, and L. Yang, “Design of Practical HSC Type Injector for Cancer Therapy”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 557-559.
- M. Gusarova and I. I. Petrushina, “Influence of the Different Geometric Parameters of Superconducting Elliptical Cavities on the Multipactor”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC19, pp. 362-364.
- A. Schempp et al., “The Cryring RFQ for Heavy Ion Acceleration”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1231-1234.
- M. Eriksson et al., “Challenge of MAX IV Towards a Multi-Purpose Highly Brilliant Light Source”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOBS4, pp. 737-741.
- R. Assmann et al., “Energy Calibration with Resonant Depolarization at LEP in 1993”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 935-938.
- Y. Li, K. Hwang, C. E. Mitchell, R. S. Rainer, R. D. Ryne, and V. V. Smaluk, “Design of Double- and Multi-Bend Achromat Lattices with Large Dynamic Aperture and Approximate Invariants”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1945-1948.
- A. Schempp and H. Klein, “Spiral Loaded Cavities for Heavy Ion Acceleration”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper B03, pp. 67-72.
- K. G. Andersen et al., “Construction and Installation of the New CERN Proton Synchrotron Internal Beam Dumps”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1409-1412.
- H. Chaloupka et al., “A Proposed Superconducting Photoemission Source of High Brightness”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G12, pp. XX-XX.
- A. L. Zhang et al., “DESIGN AND FABRICATION OF A ROTATING COIL MAGNETIC MEASUREMENT SYSTEM”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THP029, pp. XX-XX.
- J. Safranek, “Experimental Determination of Linear Optics Including Quadrupole Rotations”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAB11, pp. 2817-2819.
- C. M. Celata et al., “Cyclotron Resonances in Electron Cloud Dynamics”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE1PBI03, pp. 1807-1811.
- D. Stratakis, J. S. Berg, R. B. Palmer, and V. Balbekov, “A High-Performance Rectilinear FOFO Channel for Muon Cooling”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPHO12, pp. 1328-1330.
- M. G. Abbott et al., “Implementation, Commissioning and Current Status of the Diamond Light Source Control System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOAA05, pp. 56-58.
- J. Byrd, D. A. Goldberg, M. Irwin, and R. A. Rimmer, “Updated Impedance Estimate of the PEP-II RF Cavity”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP070L, pp. 2035-2037.
- E.-C. Huang, A. Braido, L. Rybarcyk, and P. Anisimov, “HPSim simulation of the highly bunched WNR beam at LANSCE”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG81, pp. 3457-3460.
- L. G. Zhang, R. A. Baartman, Y. Bylinskii, T. Planche, and Y.-N. Rao, “Error Magnetic Field due to the Median Plane Asymmetry and Its Applications in the Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper FRBO04, pp. 381-384.
- S. Barbanotti et al., “Connection of EU-XFEL Cryomodules, Caps, Boxes in EU-XFEL Main Linac and Injector: Welding of Cryo-Pipes and Assembly of Beam-Line Absorbers Under Requirements of PED Regulation”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB108, pp. 883-887.
- Y. G. Son, S. D. Jang, J. S. Oh, M. H. Cho, and W. Namkung, “A Study of High-Power Switch With Thyrister For Pulse Power Applications”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO468, pp. 199-201.
- S. Barbanotti, A. Bellandi, J. Branlard, and K. Jensch, “Modal Analysis of the EXFEL 1.3 GHz Cavity and Cryomodule Main Components and Comparison with Measured Data”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 488-492.
- M. Böge, J. Chrin, M. Muñoz, and A. Streun, “Commissioning of the SLS Using CORBA Based Beam Dynamics Applications”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPB012, pp. 292-294.
Back to search