Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Gessler et al., “Real-Time Sampling and Processing Hardware for Bunch Arrival-Time Monitors at FLASH and XFEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPA06, pp. 585-587.
[n] J. B. Pearson et al., “Magnetic Channel Design Concepts for the Extraction of H- Ions from the TRIUMF Cyclotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1848-1851.
[n] Ju. Wang and J. Volk, “Design and Simulation of Fast Pulsed Kicker/Bumper Units for the Positron Accumulator Ring at APS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2706-2709.
[n] W. F. Bergan, M. B. Andorf, M. P. Ehrlichman, V. Khachatryan, D. L. Rubin, and S. Wang, “Bypass Design for Testing Optical Stochastic Cooling at the Cornell Electron Storage Ring (CESR)”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 360-363. doi:10.18429/JACoW-IPAC2019-MOPGW100
[n] W. F. Bergan, V. Khachatryan, and D. L. Rubin, “Helical Wiggler Model for Fast Tracking”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3356-3359. doi:10.18429/JACoW-IPAC2019-WEPTS102
[n] R. G. Heine, P. Hartmann, H. Huck, G. Schmidt, and T. Weis, “Investigation of Cavity Induced Longitudinal Coupled Bunch Mode Instability Behaviour and Mechanisms”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT063, pp. 1990-1992.
[n] G. Jackson, “Operational Experience with the Permanent Magnet Recycler Ring at Fermilab”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5B01, pp. 542-544.
[n] T. G. Lee, K. D. Lee, S. Lee, W. R. Lee, and M. K. Park, “New Development of EPICS-based Data Acquisition System for Electron Cyclotron Emission Diagnostics in KSTAR Tokamak”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC057, pp. 699-702.
[n] M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets During Run 2 and Future Plans”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3495-3498. doi:10.18429/JACoW-IPAC2017-WEPVA100
[n] W. F. Bergan, M. B. Andorf, M. P. Ehrlichman, V. Khachatryan, D. L. Rubin, and S. Wang, “Bypass Design for Testing Optical Stochastic Cooling at the Cornell Electron Storage Ring (CESR)”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 360-363. doi:10.18429/JACoW-IPAC2019-MOPGW100
[n] C. S. Chen, C. K. Chan, K. H. Hsu, Y. T. Huang, Y.-H. Liu, and C. S. Yang, “The Installations of the In-vacuum Kicker System of the Booster Injection Section in TPS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1971-1973. doi:10.18429/JACoW-IPAC2014-WEPRO014
[n] M. Serluca et al., “Comparison of MERLIN/SixTrack for LHC Collimation Studies”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 185-187. doi:10.18429/JACoW-IPAC2014-MOPRO046
[n] Y. L. Hwong et al., “An Analysis of the Control Hierarchy Modelling of the CMS Detector Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP015, pp. 706-708.
[n] V. A. Shkaruba et al., “Status of Development of Superconducting Insertion Devices for Generation of Synchrotron Radiation at Budker INP”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 94-99. doi:10.18429/JACoW-RUPAC2018-THXMH01
[n] J. Szewinski and K. Korzunowicz, “Universal DOOCS Server Based on the Scripting Language”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC151, pp. 1425-1427.
[n] S.-H. Wang, Y.-J. Chang, T.-H. Lo, and Y.-H. Lo, “Design Study of the Beijing 200 MeV Proton Linac”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S1-2, pp. 5-7.
[n] Y. Ivanyushenkov et al., “Development Status of a Magnetic Measurement System for the APS Superconducting Undulator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP243, pp. 1286-1288.
[n] M. Attal et al., “Commissioning of SESAME Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2694-2696. doi:10.18429/JACoW-IPAC2017-WEPAB050
[n] Y.-M. Abiven, P. Betinelli-Deck, J. Bisou, F. Blache, G. Renaud, and S. Z. Zhang, “Open Hardware Collaboration: A Way to Improve Efficiency for a Team”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC077, pp. 273-276.
[n] L. R. Carver et al., “Current Status of Instability Threshold Measurements in the LHC at 6.5 TeV”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1434-1437. doi:10.18429/JACoW-IPAC2016-TUPMW011
[n] E. Matias et al., “Canadian Light Source - Phase II Beamline Control System Status Update”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP075, pp. 254-256.
[n] M. K. Park et al., “The Newly Constructed EPICS-based Control System for KSTAR Tokamak Device”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUD002, pp. XX-XX.
[n] M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3623-3626. doi:10.18429/JACoW-IPAC2016-THPMW033
[n] Y.-H. Liu, C. S. Chen, and Y.-C. Chung, “Vibration Evaluation for Deionized Water Pumps in TPS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3731-3733. doi:10.18429/JACoW-IPAC2016-THPMY033
For LaTeX
Use Complete Form
For BibTeX
References
- P. Gessler et al., “Real-Time Sampling and Processing Hardware for Bunch Arrival-Time Monitors at FLASH and XFEL”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPA06, pp. 585-587.
- J. B. Pearson et al., “Magnetic Channel Design Concepts for the Extraction of H- Ions from the TRIUMF Cyclotron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1848-1851.
- Ju. Wang and J. Volk, “Design and Simulation of Fast Pulsed Kicker/Bumper Units for the Positron Accumulator Ring at APS”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2706-2709.
- W. F. Bergan, M. B. Andorf, M. P. Ehrlichman, V. Khachatryan, D. L. Rubin, and S. Wang, “Bypass Design for Testing Optical Stochastic Cooling at the Cornell Electron Storage Ring (CESR)”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 360-363.
- W. F. Bergan, V. Khachatryan, and D. L. Rubin, “Helical Wiggler Model for Fast Tracking”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3356-3359.
- R. G. Heine, P. Hartmann, H. Huck, G. Schmidt, and T. Weis, “Investigation of Cavity Induced Longitudinal Coupled Bunch Mode Instability Behaviour and Mechanisms”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT063, pp. 1990-1992.
- G. Jackson, “Operational Experience with the Permanent Magnet Recycler Ring at Fermilab”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5B01, pp. 542-544.
- T. G. Lee, K. D. Lee, S. Lee, W. R. Lee, and M. K. Park, “New Development of EPICS-based Data Acquisition System for Electron Cyclotron Emission Diagnostics in KSTAR Tokamak”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC057, pp. 699-702.
- M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets During Run 2 and Future Plans”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3495-3498.
- W. F. Bergan, M. B. Andorf, M. P. Ehrlichman, V. Khachatryan, D. L. Rubin, and S. Wang, “Bypass Design for Testing Optical Stochastic Cooling at the Cornell Electron Storage Ring (CESR)”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 360-363.
- C. S. Chen, C. K. Chan, K. H. Hsu, Y. T. Huang, Y.-H. Liu, and C. S. Yang, “The Installations of the In-vacuum Kicker System of the Booster Injection Section in TPS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1971-1973.
- M. Serluca et al., “Comparison of MERLIN/SixTrack for LHC Collimation Studies”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 185-187.
- Y. L. Hwong et al., “An Analysis of the Control Hierarchy Modelling of the CMS Detector Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP015, pp. 706-708.
- V. A. Shkaruba et al., “Status of Development of Superconducting Insertion Devices for Generation of Synchrotron Radiation at Budker INP”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 94-99.
- J. Szewinski and K. Korzunowicz, “Universal DOOCS Server Based on the Scripting Language”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC151, pp. 1425-1427.
- S.-H. Wang, Y.-J. Chang, T.-H. Lo, and Y.-H. Lo, “Design Study of the Beijing 200 MeV Proton Linac”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S1-2, pp. 5-7.
- Y. Ivanyushenkov et al., “Development Status of a Magnetic Measurement System for the APS Superconducting Undulator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP243, pp. 1286-1288.
- M. Attal et al., “Commissioning of SESAME Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2694-2696.
- Y.-M. Abiven, P. Betinelli-Deck, J. Bisou, F. Blache, G. Renaud, and S. Z. Zhang, “Open Hardware Collaboration: A Way to Improve Efficiency for a Team”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC077, pp. 273-276.
- L. R. Carver et al., “Current Status of Instability Threshold Measurements in the LHC at 6.5 TeV”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1434-1437.
- E. Matias et al., “Canadian Light Source - Phase II Beamline Control System Status Update”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP075, pp. 254-256.
- M. K. Park et al., “The Newly Constructed EPICS-based Control System for KSTAR Tokamak Device”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUD002, pp. XX-XX.
- M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3623-3626.
- Y.-H. Liu, C. S. Chen, and Y.-C. Chung, “Vibration Evaluation for Deionized Water Pumps in TPS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3731-3733.
Back to search
