JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	D. Sertore et al., “Basis for the Reliability Analysis of the Proton Linac for an ADS Program”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG034, pp. 1506-1508. 
[n]	M. Ferrario, J. Sekutowicz, and Ch. Tang, “Superconducting Superstructure  for the TESLA Collider”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP46C, pp. 1876-1878. 
[n]	H. Suk, C. Kim, G. H. Kim, J. U. Kim, and H. J. Lee, “Electron Acceleration by Laser Wakefields in Tapered Plasma Densities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG049, pp. 1912-1914. 
[n]	D. S. Hung, C. I. Chen, C. H. Kuo, and Y. C. Lo, “Electron Beam Motion Observed in Infrared Synchrotron Radiation at NSRRC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG028, pp. 3234-3236. 
[n]	K. W. Seo, A. H. Maeng, S. C. Lee, and I. S. Ko, “Precision Surveying and Smoothing Analysis for Pohang Light Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P069, pp. 3663-3665. 
[n]	W. H. C. Theuws, J. I. M. Botman, H. L. Hagedoorn, and A. F. J. Hammen, “Tuning Possibilities of the Longitudinal Beam Shape of a Racetrack Microtron”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA102, pp. 2825-2827. 
[n]	A. Jason, B. Blind, and E. Svaton, “Uniform Ribbon-Beam Generation for Accelerator Production of Tritium”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-58, pp. 192-195. 
[n]	V. L. Auslender et al., “TRIODE RF GUN FOR LINEAR ELECTRON ACCELERATORS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP28, pp. XX-XX. 
[n]	L. M. Earley, J. M. Potter, and A. J. Thomas, “Tuning Experience with FMIT Scale-Model Drift-Tube Linac”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B14, pp. 74-76. 
[n]	V. D. Burlakov et al., “Status of the Construction of the INR Meson Factory”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOA0002, pp. 9-13. 
[n]	R. Nawrocky et al., “An Active Interlock System for the NSLS X-Ray Ring Insertion Devices”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2790-2793. 
[n]	E. L. Wright and H. P. Bohlen, “Modeling and Simulation Results of High-power HOM IOTs”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH167, pp. 0-3645. 
[n]	E. R. Gray and G. Spalek, “Power Coupler and Cold Window for Seven-Cell Superconducting Cavity Vertical Test”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-49, pp. 450-452. 
[n]	C. Pagani et al., “Status of the High Energy SC Linac for the TRASCO Program”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH304, pp. 3612-3614. 
[n]	S. Jacobsen, G. Molinari, and H. Mulder, “A Feedback System to Control the Flux during Ultra Slow Extraction at LEAR”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP014L, pp. 1845-1847. 
[n]	J. C. Smith, L. Keller, S. A. Lundgren, and T. W. Markiewicz, “Construction and Bench Testing of a Rotatable Collimator for the LHC Collimation Upgrade”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB078, pp. 1701-1703. 
[n]	K. Suganuma, K. Fujirai, M. Kinsho, P. K. Saha, and Y. Yamazaki, “Operating Experience of Water Cooling System in the J-PARC LINAC and RCS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2203-2205. doi:10.18429/JACoW-IPAC2018-WEPAL022
[n]	Q. A. Kerns, J. E. Katz, and G. S. Tool, “Ferrite Measurements for Synchrotron RF Accelerating System Design”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 185-191. 
[n]	J. Hoover, S. Orr, J. Ryk, and A. T. Visser, “Power for the FermilabTevatron Helium Liquefier”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3938-3941. 
[n]	L. Burnod and E. D, “New Methods to Correct On-Line the Closed Orbit of a Synchrotron Accelerator with Variable Focusing Configuration”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2284-2287. 
[n]	J. H. Kelly, “Engineering Challenges of the VMXi Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 304-308. doi:10.18429/JACoW-MEDSI2016-WECA07
[n]	D. Cook, J. Clare, J. S. Przybyla, and P. W. Wheeler, “Design of A Direct Power Converter for High Power RF Applications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN083, pp. 2221-2223. 
[n]	J. Shi, L. Jin, D. Wang, and F. Wang, “Beam-Beam Effects in the Ring-Ring Version of eRHIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP017, pp. 1520-1522. 
[n]	L. H. Chang, W. K. Lau, M. C. Lin, and T. T. Yang, “Development of the RF Kicker for the Longitudinal Feedback System at SRRC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP42C, pp. 1708-1710. 
[n]	M. Nomura et al., “Status of High Power CW Linac at PNC”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 745-748. 
[n]	K. C. Harkay, V. Sajaev, and B. X. Yang, “Transverse Multibunch Bursting Instability in the APS Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN110, pp. 4360-4362. 
[n]	A. Bogomyagkov et al., “VEPP-4M Operation at Low Energy”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THM204, pp. XX-XX. 
[n]	K. J. Beczek, J. W. Lewellen, A. Nassiri, and E. Tanabe, “A Rationalized Approach to Thermionic RF Gun Design”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH052, pp. 2206-2208. 
[n]	A. Novokhatski, F.-J. Decker, R. O. Hettel, Z. Huang, H.-D. Nuhn, and M. K. Sullivan, “Coherent X-Ray Seeding Source for Driving FELs”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO11, pp. 522-524. 
[n]	T. Atkinson, P. Goslawski, J. G. Hwang, M. Ries, T. Flisgen, and T. Mertens, “VSR Injector Upgrade at BESSY II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4110-4113. doi:10.18429/JACoW-IPAC2018-THPMF030
[n]	J. Gioia et al., “A Room Temperature Test Bed for Evaluating 700-MHz RF Windows and Power Couplers for the Superconducting Cavities of the APT Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA137, pp. 1396-1398. 
[n]	A. Balabaev et al., “Laser Source of Highly-Charged Ions for ITEP TeraWatt Accumulator Facility”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A01, pp. 551-553. 
[n]	J. Nudell, H. Cease, J. T. Collins, Z. Liu, and C. A. Preissner, “Preliminary Design and Analysis of the FODO Module Support System for the APS-U Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 83-86. doi:10.18429/JACoW-MEDSI2016-MOPE32
[n]	E. Higgins, Q. Kerns, H. Miller, B. Prichard, R. Stiening, and G. Tool, “The Fermilab Transverse Instability Active Damping System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1473-1475. 
[n]	J. Chavanne, P. Elleaume, and P. Van Vaerenbergh, “Recent Developments of Insertion Devices at ESRF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P026, pp. 3506-3508. 
[n]	S. Tantawi et al., “Studies of an X-Band Three-Cavity Gyroklystron with Penultimate Cavity Tuning”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 731-734. 
[n]	S. Artinian, J. F. Bergoz, F. Stulle, P. Pollet, and V. Schlott, “Development and First Tests of a High Sensitivity Charge Monitor for SwissFEL”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB87, pp. 287-290. 
[n]	M. J. Boland, T. M. Mitsuhashi, T. Naito, and K. P. Wootton, “Intensity Imbalance Optical Interferometer Beam Size Monitor”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper WECC03, pp. 566-570. 
[n]	V. Tioukine, K. Aulenbacher, H. Euteneuer, K.-H. Kaiser, and S. Ratschow, “Spin Manipulation at MAMI - C”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO022, pp. 1816-1818. 
[n]	Y. Bao, X. Li, Y. Li, Y. P. Song, and X. Tong, “High-Quality Muon Beam Production Based on Superconducting Solenoids”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 630-632. doi:10.18429/JACoW-IPAC2019-MOPRB026
[n]	C. Rodrigues et al., “Overview of Sirius Power Supply System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1230-1232. doi:10.18429/JACoW-IPAC2019-TUPMP002
[n]	M. Champion et al., “The Spallation Neutron Source Accelerator Low Level RF Control System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB038, pp. 3377-3379. 
[n]	V. Rapp and W. Sliwinski, “Controls Middleware for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WCO102, pp. 4-6. 
[n]	A. H. Lumpkin, C. A. Brau, J. S. Fraser, and R. W. Warren, “Time-Resolved Electron Beam Diagnostics for the Los Alamos Free-Electron Laser Oscillator Experiment”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3139-3142. 
[n]	C. Ohmori et al., “High Field Gradient Cavity for J-PARC 3 GeV RCS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEOACH01, pp. 123-125. 
[n]	N. G. Wyles, J. Jones, H. L. Owen, and J. A. Varley, “DIAMOND Storage Ring Apertures”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE004, pp. 781-783. 
[n]	P. Balleyguier, J. Sherman, and T. Zaugg, “Suppression of the 1MHz Beam Current Modulation in the LEDA Proton Source”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4045, pp. 869-871. 
[n]	C. E. Chen, J. X. Fang, J. X. Yu, and K. Zhan, “Activities on Heavy Ion RFQ and RF Superconducting Cavities at Peking University”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 7B003, pp. 873-877. 
[n]	I. R. Collins et al., “A Photodesorption Study of a TiZrV Coated Stainless Steel Vacuum Chamber”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO013, pp. 2550-2552. 
[n]	D. Janssen et al., “Review on Superconducting RF Guns”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THA06, pp. 433-437. 
[n]	T. Eriksson et al., “ELENA - From Installation to Commissioning”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3327-3330. doi:10.18429/JACoW-IPAC2017-WEPVA034
[n]	R. R. Lindberg, “Modelling Crystal Misaligments for the X-ray FEL Oscillator”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 110-113. doi:10.18429/JACoW-FEL2019-TUP027
[n]	P. Baxevanis and R. D. Ruth, “Theoretical Analysis of a Laser Undulator-Based High Gain FEL”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO04, pp. 27-31. 
[n]	A. Mosnier, F. Orsini, and B. Phung, “Analysis of the Heavily Beam-loaded SOLEIL RF System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP28G, pp. 1720-1722. 
[n]	J. A. Nolen and J. C. Dooling, “A Concept for Emittance Reduction of DC Radioactive Heavy-Ion Beams”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ16, pp. 3320-3322. 
[n]	B. Salvachua et al., “An Off-Momentum Beam Loss Feedback Controller and Graphical User Interface for the LHC”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 359. doi:10.18429/JACoW-ICALEPCS2019-MOPHA064
[n]	K. Nishiyama et al., “FPGA Utilization in the Accelerator Interlock System (About the MPS Development in the LIPAc)”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO019, pp. 201-203. 
[n]	D. J. Kelliher et al., “Longitudinal Tomography in a Scaling FFA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 719-722. doi:10.18429/JACoW-IPAC2019-MOPRB063

For LaTeX

Use Complete Form

For BibTeX

References

Back to search