Favourites
For Word
[n] K. Harada et al., “Beam Injection for the PF-AR with a Single Pulsed Quadrupole Magnet”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT016, pp. 1517-1519.
[n] R. Bartolini and F. Schmidt, “Non-Linear Ring Model Calibration with Frequency Analysis of Betatron Oscillations”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE015, pp. 1452-1454.
[n] T.-Y. Lee et al., “Design Status of PAL-XFEL”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH071, pp. 210-213.
[n] T. Ohshima and N. Kumagai, “Suppression of Coherent Synchrotron Oscillation of the SPring-8 Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH132, pp. 1975-1977.
[n] I. Baek, R. Remec, R. M. Ronningen, X. Wu, and A. Zeller, “Determination of Component Activation and Radiation Environment in the Second Stripping Region of a High-Power Heavy-Ion Linear Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS050, pp. 1760-1762.
[n] H. Fujisawa et al., “Beam Tests of the ''Modified'' 34 MHz CW 4-Rod RFQ”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-03, pp. 695-697.
[n] Z. C. Liu, J. Gao, S. Jin, Y. Wang, and H. J. Zheng, “High HOM Damping Structure Study for CEPC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2183-2185. doi:10.18429/JACoW-IPAC2016-WEPMB028
[n] Y. Honda et al., “Stimulated Emission of THz Coherent Diffraction Radiation in an Optical Cavity by a Multibunch Electron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1763-1765. doi:10.18429/JACoW-IPAC2019-TUPRB035
[n] Ph. Bryant, H. Schonauer, E. Griesmayer, E. Jericha, H. Rauch, and M. Regler, “A 0.5 MW / 10 Hz Option of the Spallation Source AUSTRON”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA156, pp. 2957-2959.
[n] Y. Jung et al., “Heat Treatment for a Prototype Half-Wave Resonator Cavity”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 339-341. doi:10.18429/JACoW-LINAC2018-TUPO009
[n] S. Machida, M. Yoshii, Y. Mori, N. Tokuda, and Y. Ishi, “Design Study of AntiProton Accumulation and Deceleration Ring in the KEK PS Complex”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAP04, pp. 360-362.
[n] M. Awschalom, T. Borak, H. Howe, F. Schamber, R. Shafer, and D. Theriot, “Novel Instrumentation for Radiation Monitoring at NAL”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 748-750.
[n] T. Adachi et al., “Development of a Signal Processing Board for Spill Digital Servo System for Proton Synchrotron”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB14, pp. 430-432.
[n] C. Kim et al., “Single Bunch Collective Effects in PLS Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH117, pp. 1939-1941.
[n] S. Ohnuma, “Coupled Motion in Low-Energy Proton Linear Accelerators”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper V-03, pp. 214-219.
[n] V. S. Morozov et al., “Analysis of Spin Response Function at Beam Interaction Point in JLEIC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 400-403. doi:10.18429/JACoW-IPAC2018-MOPML007
[n] T. De Melo Mendonca, “HIGH POWER MOLTEN TARGETS FOR RADIOACTIVE ION BEAM PRODUCTION: FROM PARTICLE PHYSICS TO MEDICAL APPLICATIONS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2143-2145. doi:10.18429/JACoW-IPAC2014-WEPRO080
[n] J.-L. Revol and R. Nagaoka, “Observation, Modelling and Cure of Transverse Instabilities at the ESRF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH112, pp. 1930-1932.
[n] S. I. Tomin, G. Geloni, I. V. Agapov, W. Decking, M. Scholz, and I. Zagorodnov, “On-line Optimization of European XFEL with OCELOT”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1038-1042. doi:10.18429/JACoW-ICALEPCS2017-WEAPL07
[n] A. W. Chao, M. A. Furman, and K. Y. Ng, “A Possible Symplectic Coherent Beam-Beam Model”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 684-687.
[n] A. Araz et al., “Development of a New Low-Level RF-Control-System for the S-DALINAC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC138, pp. 1389-1391.
[n] T. Takahashi, M. Izawa, S. Sakanaka, and K. Umemori, “Renewal of Klystron Power Supply for the Photon Factory Storage Ring at KEK”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP087, pp. 1035-1037.
[n] R. Li, J. Guo, F. Marhauser, and S. Wang, “Longitudinal Coupled Bunch Instability in JLEIC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3530-3532. doi:10.18429/JACoW-IPAC2018-THPAK122
[n] R. S. Ahlman et al., “Process Control System for the Tevatron Liquefier”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4099-4102.
[n] B. Sheehy, J. A. Clarke, D. J. Dunning, B. W. J. McNeil, and N. Thompson, “Issues in High Harmonic Seeding of the 4GLS XUV-FEL”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH067, pp. 198-201.
[n] G. Feng et al., “Start-to-End Simulation for FLASH2 HGHG Option”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP083, pp. 244-247.
[n] R. Kamath and P. Jurj, “Application of bayesian optimization in magnetic horn design”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB032, unpublished.
[n] S. D. Webb and V. Litvinenko, “Evolution of Electron Beam Phase Space Distribution in a High-gain FEL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC83, pp. 208-210.
[n] S. Tomin, L. Fr?Âhlich, and M. Scholz, “Status of Automated Optimization Procedures at the European XFEL Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1212-1215. doi:10.18429/JACoW-IPAC2019-TUZZPLM2
[n] R. Kamath, C. Rogers, and P. Jurj, “Simulating a 6D cooling channel in BDSIM”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1050-1052. doi:10.18429/JACoW-IPAC2024-TUPC20
[n] C. Liu, W. Ackermann, W. F. O. M??ller, and T. Weiland, “Numerical Calculation of Electromagnetic Fields in Acceleration Cavities Under Precise Consideration of Coupler Structures”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO007, pp. 897-899.
[n] B. Holzer and C. Montag, “Reproducibility and Predictability of Persistent Current Effects in the HERA Proton Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3B10, pp. 2142-2144.
[n] B. Bravo et al., “Calibration of the Acceleration Voltage of Six Normal Conducting Cavities at ALBA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3036-3038. doi:10.18429/JACoW-IPAC2015-WEPMN049
[n] K. Tamura et al., “Feasibility Tests of a Vacuum System for SPring-8-II”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1272-1275. doi:10.18429/JACoW-IPAC2019-TUPMP018
[n] J. W. Kim and H. Kim, “Quality Factor Measurement Method Using Multi Decay Time Constants on Cavity”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 1011-1013. doi:10.18429/JACoW-LINAC2016-THPLR069
[n] N. Galayda, “The Linac Coherent Light Source Project”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO201, pp. 6-10.
[n] H. Podlech et al., “Conceptual Design of the Proton LINAC for the High Brilliance Neutron Source HBS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 910-913. doi:10.18429/JACoW-IPAC2019-MOPTS027
[n] K. Harada, Y. Kobayashi, S. Matsuba, T. Miyajima, S. Nagahashi, and T. Obina, “Fast Local Bump System for Helicity Switching at the Photon Factory”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC150, pp. 2356-2358.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Harada et al., “Beam Injection for the PF-AR with a Single Pulsed Quadrupole Magnet”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT016, pp. 1517-1519.
- R. Bartolini and F. Schmidt, “Non-Linear Ring Model Calibration with Frequency Analysis of Betatron Oscillations”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE015, pp. 1452-1454.
- T.-Y. Lee et al., “Design Status of PAL-XFEL”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH071, pp. 210-213.
- T. Ohshima and N. Kumagai, “Suppression of Coherent Synchrotron Oscillation of the SPring-8 Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH132, pp. 1975-1977.
- I. Baek, R. Remec, R. M. Ronningen, X. Wu, and A. Zeller, “Determination of Component Activation and Radiation Environment in the Second Stripping Region of a High-Power Heavy-Ion Linear Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS050, pp. 1760-1762.
- H. Fujisawa et al., “Beam Tests of the ''Modified'' 34 MHz CW 4-Rod RFQ”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-03, pp. 695-697.
- Z. C. Liu, J. Gao, S. Jin, Y. Wang, and H. J. Zheng, “High HOM Damping Structure Study for CEPC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2183-2185.
- Y. Honda et al., “Stimulated Emission of THz Coherent Diffraction Radiation in an Optical Cavity by a Multibunch Electron Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1763-1765.
- Ph. Bryant, H. Schonauer, E. Griesmayer, E. Jericha, H. Rauch, and M. Regler, “A 0.5 MW / 10 Hz Option of the Spallation Source AUSTRON”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA156, pp. 2957-2959.
- Y. Jung et al., “Heat Treatment for a Prototype Half-Wave Resonator Cavity”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 339-341.
- S. Machida, M. Yoshii, Y. Mori, N. Tokuda, and Y. Ishi, “Design Study of AntiProton Accumulation and Deceleration Ring in the KEK PS Complex”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAP04, pp. 360-362.
- M. Awschalom, T. Borak, H. Howe, F. Schamber, R. Shafer, and D. Theriot, “Novel Instrumentation for Radiation Monitoring at NAL”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 748-750.
- T. Adachi et al., “Development of a Signal Processing Board for Spill Digital Servo System for Proton Synchrotron”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB14, pp. 430-432.
- C. Kim et al., “Single Bunch Collective Effects in PLS Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH117, pp. 1939-1941.
- S. Ohnuma, “Coupled Motion in Low-Energy Proton Linear Accelerators”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper V-03, pp. 214-219.
- V. S. Morozov et al., “Analysis of Spin Response Function at Beam Interaction Point in JLEIC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 400-403.
- T. De Melo Mendonca, “HIGH POWER MOLTEN TARGETS FOR RADIOACTIVE ION BEAM PRODUCTION: FROM PARTICLE PHYSICS TO MEDICAL APPLICATIONS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2143-2145.
- J.-L. Revol and R. Nagaoka, “Observation, Modelling and Cure of Transverse Instabilities at the ESRF”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH112, pp. 1930-1932.
- S. I. Tomin, G. Geloni, I. V. Agapov, W. Decking, M. Scholz, and I. Zagorodnov, “On-line Optimization of European XFEL with OCELOT”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1038-1042.
- A. W. Chao, M. A. Furman, and K. Y. Ng, “A Possible Symplectic Coherent Beam-Beam Model”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 684-687.
- A. Araz et al., “Development of a New Low-Level RF-Control-System for the S-DALINAC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC138, pp. 1389-1391.
- T. Takahashi, M. Izawa, S. Sakanaka, and K. Umemori, “Renewal of Klystron Power Supply for the Photon Factory Storage Ring at KEK”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP087, pp. 1035-1037.
- R. Li, J. Guo, F. Marhauser, and S. Wang, “Longitudinal Coupled Bunch Instability in JLEIC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3530-3532.
- R. S. Ahlman et al., “Process Control System for the Tevatron Liquefier”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4099-4102.
- B. Sheehy, J. A. Clarke, D. J. Dunning, B. W. J. McNeil, and N. Thompson, “Issues in High Harmonic Seeding of the 4GLS XUV-FEL”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH067, pp. 198-201.
- G. Feng et al., “Start-to-End Simulation for FLASH2 HGHG Option”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP083, pp. 244-247.
- R. Kamath and P. Jurj, “Application of bayesian optimization in magnetic horn design”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB032, this conference.
- S. D. Webb and V. Litvinenko, “Evolution of Electron Beam Phase Space Distribution in a High-gain FEL”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper MOPC83, pp. 208-210.
- S. Tomin, L. Fr?Âhlich, and M. Scholz, “Status of Automated Optimization Procedures at the European XFEL Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1212-1215.
- R. Kamath, C. Rogers, and P. Jurj, “Simulating a 6D cooling channel in BDSIM”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC20, pp. 1050-1052.
- C. Liu, W. Ackermann, W. F. O. M??ller, and T. Weiland, “Numerical Calculation of Electromagnetic Fields in Acceleration Cavities Under Precise Consideration of Coupler Structures”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO007, pp. 897-899.
- B. Holzer and C. Montag, “Reproducibility and Predictability of Persistent Current Effects in the HERA Proton Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP3B10, pp. 2142-2144.
- B. Bravo et al., “Calibration of the Acceleration Voltage of Six Normal Conducting Cavities at ALBA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3036-3038.
- K. Tamura et al., “Feasibility Tests of a Vacuum System for SPring-8-II”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1272-1275.
- J. W. Kim and H. Kim, “Quality Factor Measurement Method Using Multi Decay Time Constants on Cavity”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 1011-1013.
- N. Galayda, “The Linac Coherent Light Source Project”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO201, pp. 6-10.
- H. Podlech et al., “Conceptual Design of the Proton LINAC for the High Brilliance Neutron Source HBS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 910-913.
- K. Harada, Y. Kobayashi, S. Matsuba, T. Miyajima, S. Nagahashi, and T. Obina, “Fast Local Bump System for Helicity Switching at the Photon Factory”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC150, pp. 2356-2358.
Back to search