Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4096-4099. doi:10.18429/JACoW-IPAC2017-THPAB154
[n] J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1554-1557.
[n] L. N. Drosdal et al., “Automatic Injection Quality Checks for the LHC”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU011, pp. 1077-1080.
[n] R. J. Steinhagen et al., “Generic Digitization of Analog Signals at FAIR ÔÇô First Prototype Results at GSI”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2514-2517. doi:10.18429/JACoW-IPAC2019-WEPGW021
[n] W. W. Terpstra, “The Case for Soft-CPUs in Accelerator Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHMUST05, pp. 1252-1255.
[n] J. M. Han et al., “Design and Fabrication of the KOMAC RFQ”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA61, pp. 3525-3527.
[n] D. Beauregard and J. Stampe, “Canadian Light Source developments of the ALBA/CLS DLLRF system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3439-3441. doi:10.18429/JACoW-IPAC2024-THPG70
[n] P. Brown et al., “Performance of the LEP 200 Superconducting RF System”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOA001, pp. XX-XX.
[n] D. J. Clark, “Invited Paper: Cyclotrons as Mass Spectrometers”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper L03, pp. 534-539.
[n] R. Cappi et al., “The CERN PS Complex as Part of the LHC Injector Chain”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 171-174.
[n] R. W. Garnett, C. Rose, F. Shelley, and J. D. Zumbro, “Status of a New Switchyard Design for LANSCE”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4021, pp. 436-438.
[n] H. Guler, N. ElKamchi, P. Gauron, and H. Monard, “Control Command Strategy for the ThomX Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2284-2287. doi:10.18429/JACoW-IPAC2018-WEPAL048
[n] D. Jacquet, R. Gorbonosov, and G. Kruk, “LSA - the High Level Application Software of the LHC - and Its Performance During the First Three Years of Operation”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC058, pp. 1201-1204.
[n] Y. S. Cho, B. H. Choi, J. H. Jang, H. J. Kwon, and M. Y. Park, “Design of 20MeV DTL for PEFP”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB016, pp. 1219-1221.
[n] S. Maury et al., “Commissioning and First Operation of the Antiproton Decelerator (AD)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPA008, pp. 580-584.
[n] R. J. Burleigh, D. J. Clark, and W. S. Flood, “150-MeV Proton Medical Cyclotron Design Study”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper B-06, pp. 135-138.
[n] G. T. Danby, J. W. Jackson, and S. T. Lin, “High-Field Iron Core Magnets”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 894-899.
[n] R. Maier, D. Prasuhn, W. Schwab, H. J. Stein, and J. Witt, “Operational Characteristics of the COSY Electron Cooler”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1200-1203.
[n] M. Abbaslou, S. Dastan, J. Rahighi, F. Saeidi, and M. Sedaghatizadeh, “New Source for Bending Magnet Beam Lines at Ultra-Low-Emittance Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1557-1560. doi:10.18429/JACoW-IPAC2019-TUPGW068
[n] A. Degiovanni et al., “Emittance Measurements at the Strasbourg TR24 Cyclotron for the Addition of a 65 MeV Linac Booster”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT005, pp. 329-331.
[n] M. Farkhondeh, S. P. Holmberg, W. W. Sapp, and J. D. Zumbro, “Fiducialization of Magnets for the MIT-Bates SHR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 634-637.
[n] H. Gassot, S. Bousson, G. Olry, and S. Rousselot, “Low- Triple Spoke Cavity Design Improvement for Proton Linac”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO039, pp. 177-179.
[n] K. D. Jacobs, J. B. Flanz, and T. Russ, “Emittance Measurements at the Bates Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1526-1529.
[n] I. Rodriguez, “Transient Simulation of the ISIS Synchrotron Singlet Quadrupoles Using OPERA 3D”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4334-4337. doi:10.18429/JACoW-IPAC2017-THPIK104
For LaTeX
Use Complete Form
For BibTeX
References
- D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4096-4099.
- J. Sebek, R. Hettel, R. Matheson, R. Ortiz, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1554-1557.
- L. N. Drosdal et al., “Automatic Injection Quality Checks for the LHC”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU011, pp. 1077-1080.
- R. J. Steinhagen et al., “Generic Digitization of Analog Signals at FAIR ÔÇô First Prototype Results at GSI”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2514-2517.
- W. W. Terpstra, “The Case for Soft-CPUs in Accelerator Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHMUST05, pp. 1252-1255.
- J. M. Han et al., “Design and Fabrication of the KOMAC RFQ”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA61, pp. 3525-3527.
- D. Beauregard and J. Stampe, “Canadian Light Source developments of the ALBA/CLS DLLRF system”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG70, pp. 3439-3441.
- P. Brown et al., “Performance of the LEP 200 Superconducting RF System”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper MOA001, pp. XX-XX.
- D. J. Clark, “Invited Paper: Cyclotrons as Mass Spectrometers”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper L03, pp. 534-539.
- R. Cappi et al., “The CERN PS Complex as Part of the LHC Injector Chain”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 171-174.
- R. W. Garnett, C. Rose, F. Shelley, and J. D. Zumbro, “Status of a New Switchyard Design for LANSCE”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4021, pp. 436-438.
- H. Guler, N. ElKamchi, P. Gauron, and H. Monard, “Control Command Strategy for the ThomX Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2284-2287.
- D. Jacquet, R. Gorbonosov, and G. Kruk, “LSA - the High Level Application Software of the LHC - and Its Performance During the First Three Years of Operation”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC058, pp. 1201-1204.
- Y. S. Cho, B. H. Choi, J. H. Jang, H. J. Kwon, and M. Y. Park, “Design of 20MeV DTL for PEFP”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB016, pp. 1219-1221.
- S. Maury et al., “Commissioning and First Operation of the Antiproton Decelerator (AD)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROPA008, pp. 580-584.
- R. J. Burleigh, D. J. Clark, and W. S. Flood, “150-MeV Proton Medical Cyclotron Design Study”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper B-06, pp. 135-138.
- G. T. Danby, J. W. Jackson, and S. T. Lin, “High-Field Iron Core Magnets”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 894-899.
- R. Maier, D. Prasuhn, W. Schwab, H. J. Stein, and J. Witt, “Operational Characteristics of the COSY Electron Cooler”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1200-1203.
- M. Abbaslou, S. Dastan, J. Rahighi, F. Saeidi, and M. Sedaghatizadeh, “New Source for Bending Magnet Beam Lines at Ultra-Low-Emittance Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1557-1560.
- A. Degiovanni et al., “Emittance Measurements at the Strasbourg TR24 Cyclotron for the Addition of a 65 MeV Linac Booster”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT005, pp. 329-331.
- M. Farkhondeh, S. P. Holmberg, W. W. Sapp, and J. D. Zumbro, “Fiducialization of Magnets for the MIT-Bates SHR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 634-637.
- H. Gassot, S. Bousson, G. Olry, and S. Rousselot, “Low- Triple Spoke Cavity Design Improvement for Proton Linac”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO039, pp. 177-179.
- K. D. Jacobs, J. B. Flanz, and T. Russ, “Emittance Measurements at the Bates Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1526-1529.
- I. Rodriguez, “Transient Simulation of the ISIS Synchrotron Singlet Quadrupoles Using OPERA 3D”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4334-4337.
Back to search