Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. K. Kuhn and A. Hilaire, “The CERN SPS Low Beta Insertion Control System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2293-2296.
[n] A. Hilaire, V. Mertens, and E. Weisse, “Beam Transfer to and Injection into LHC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07C, pp. 2117-2119.
[n] M. J. Barnes, L. Ducimetiere, U. Jansson, G. Schroeder, E. G. Vossenberg, and G. D. Wait, “Kick Stability Analysis of the LHC Inflectors”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP119G, pp. 2591-2596.
[n] Z. C. Chen, Y. B. Leng, Y. B. Yan, and B. P. Wang, “Correlation Analysis of Beam Diagnostic Measurements in SSRF”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR036, pp. 858-860.
[n] J. Crittenden et al., “Study of the systematic error contributions to the measurement of beam size using sextupole magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3130-3132. doi:10.18429/JACoW-IPAC2023-WEPL013
[n] M. A. Palmer et al., “Design and Operation of a Radiative Bhabha Luminosity Monitor for CESR-c”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT062, pp. 3564-3566.
[n] J. Bosser et al., “Laser Wire Scanner Development on CTF II”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU411, pp. 326-328.
[n] A. Temnykh, J. Crittenden, D. Rice, and D. L. Rubin, “Beam Based Characterization of a New 7-Pole Superconducting Wiggler at CESR”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB068, pp. 3425-3427.
[n] J. Bosser et al., “Single Bunch Profile Measurement Using Synchrotron Light from an Undulator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2164-2167.
[n] D. Sagan, J. Crittenden, E. Forest, and D. L. Rubin, “A Magnetic Field Model for Wigglers and Undulators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG006, pp. 1023-1025.
[n] R. D?Âlling, F. Marcellini, and M. Sapinski, “Test of a Prototype for Modular Profile and Position Monitors in the Shielding of the 590 MeV Beam Line at HIPA”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 92-95. doi:10.18429/JACoW-IBIC2022-MOP24
[n] J.-H. Jang, Y.-S. Cho, and H.-J. Kwon, “Beam Commissioning Plan of PEFP 100-MeV linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS055, pp. 2619-2621.
[n] U. Bechstedt et al., “Magnets for the German Spallation Source SNQ”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3631-3634.
[n] D. L. Rubin, “CESR Plus”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1837-1841.
[n] J. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and R. X. Yuan, “The Evaluation of Beam Inclination Angle on the Cavity BPM Position Measurement”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 278-280. doi:10.18429/JACoW-IBIC2018-TUPB09
[n] H. Zimmermann et al., “The Frankfurt Funneling Experiment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FOAB009, pp. 677-679.
[n] S. Adam, A. Adelmann, and R. D?Âlling, “Steps to Enhance the Knowledge on Space Charge Effects”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper K-4, pp. XX-XX.
[n] R. D?Âlling, “Beam Diagnostics for Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper WEM2CIO04, pp. 344-350.
[n] A. Ferrari, A. Ijspeert, G. R. Stevenson, and E. Weisse, “Design of the LHC Beam Dump”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1300-1303.
[n] U. Bechstedt et al., “Conditioning the Cooler Synchrotron COSY for Internal Experiments”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP075G, pp. 572-574.
[n] D. Shoffstall, “Visible Wavelength Free Electron Oscillator”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE2-04, pp. 295-301.
[n] F. Varela, M. Gonzalez-Berges, and N. Lurkin, “Reusing the Knowledge from the LHC Experiments to Implement the NA62 Run Control”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC064, pp. 725-728.
[n] T. Wu et al., “Design of Stripline BPM for the SHINE Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2605-2607. doi:10.18429/JACoW-IPAC2019-WEPGW057
[n] J. Chen et al., “Precise Bunch Charge Measurement Using BPM Pickup”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 21-25. doi:10.18429/JACoW-IBIC2020-TUAO01
For LaTeX
Use Complete Form
For BibTeX
References
- H. K. Kuhn and A. Hilaire, “The CERN SPS Low Beta Insertion Control System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2293-2296.
- A. Hilaire, V. Mertens, and E. Weisse, “Beam Transfer to and Injection into LHC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP07C, pp. 2117-2119.
- M. J. Barnes, L. Ducimetiere, U. Jansson, G. Schroeder, E. G. Vossenberg, and G. D. Wait, “Kick Stability Analysis of the LHC Inflectors”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP119G, pp. 2591-2596.
- Z. C. Chen, Y. B. Leng, Y. B. Yan, and B. P. Wang, “Correlation Analysis of Beam Diagnostic Measurements in SSRF”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR036, pp. 858-860.
- J. Crittenden et al., “Study of the systematic error contributions to the measurement of beam size using sextupole magnets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL013, pp. 3130-3132.
- M. A. Palmer et al., “Design and Operation of a Radiative Bhabha Luminosity Monitor for CESR-c”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT062, pp. 3564-3566.
- J. Bosser et al., “Laser Wire Scanner Development on CTF II”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU411, pp. 326-328.
- A. Temnykh, J. Crittenden, D. Rice, and D. L. Rubin, “Beam Based Characterization of a New 7-Pole Superconducting Wiggler at CESR”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB068, pp. 3425-3427.
- J. Bosser et al., “Single Bunch Profile Measurement Using Synchrotron Light from an Undulator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2164-2167.
- D. Sagan, J. Crittenden, E. Forest, and D. L. Rubin, “A Magnetic Field Model for Wigglers and Undulators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG006, pp. 1023-1025.
- R. D?Âlling, F. Marcellini, and M. Sapinski, “Test of a Prototype for Modular Profile and Position Monitors in the Shielding of the 590 MeV Beam Line at HIPA”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 92-95.
- J.-H. Jang, Y.-S. Cho, and H.-J. Kwon, “Beam Commissioning Plan of PEFP 100-MeV linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS055, pp. 2619-2621.
- U. Bechstedt et al., “Magnets for the German Spallation Source SNQ”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3631-3634.
- D. L. Rubin, “CESR Plus”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1837-1841.
- J. Chen, L. W. Lai, Y. B. Leng, L. Y. Yu, and R. X. Yuan, “The Evaluation of Beam Inclination Angle on the Cavity BPM Position Measurement”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 278-280.
- H. Zimmermann et al., “The Frankfurt Funneling Experiment”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAB009, pp. 677-679.
- S. Adam, A. Adelmann, and R. D?Âlling, “Steps to Enhance the Knowledge on Space Charge Effects”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper K-4, pp. XX-XX.
- R. D?Âlling, “Beam Diagnostics for Cyclotrons”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper WEM2CIO04, pp. 344-350.
- A. Ferrari, A. Ijspeert, G. R. Stevenson, and E. Weisse, “Design of the LHC Beam Dump”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1300-1303.
- U. Bechstedt et al., “Conditioning the Cooler Synchrotron COSY for Internal Experiments”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP075G, pp. 572-574.
- D. Shoffstall, “Visible Wavelength Free Electron Oscillator”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE2-04, pp. 295-301.
- F. Varela, M. Gonzalez-Berges, and N. Lurkin, “Reusing the Knowledge from the LHC Experiments to Implement the NA62 Run Control”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC064, pp. 725-728.
- T. Wu et al., “Design of Stripline BPM for the SHINE Project”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2605-2607.
- J. Chen et al., “Precise Bunch Charge Measurement Using BPM Pickup”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 21-25.
Back to search