JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	B. Rusnak et al., “Evaluation of RF Seals for Resonant Cavity Applications”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO431, pp. 129-131. 
[n]	A. V. Perna et al., “The HD-DCM-Lite: A High-Dynamic DCM with Extended Scanning Capabilities for Sirius/LNLS Beamlines”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 203. doi:10.18429/JACoW-MEDSI2020-TUPC11
[n]	W. G. Davies, “Injection Diagnostic Procedures for the Chalk River Superconducting Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper I02, pp. 328-331. 
[n]	C. Benvenuti, “Invited Paper: Cryopumping for Cyclotrons”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-02, pp. 2128-2132. 
[n]	J. Karmakar et al., “Simulation Studies for Dark Current Signature From DLS RF Gun”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1630-1632. doi:10.18429/JACoW-IPAC2021-TUPAB105
[n]	G. S. Fedel et al., “LLRF and Timing System Integration at ESS”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1426-1430. doi:10.18429/JACoW-ICALEPCS2023-THPDP051
[n]	S. Singh, “Particle injection and acceleration in laser wakefield generated via propagation of two laser pulses”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPC31, unpublished. 
[n]	C. Birattari, M. Bonardi, F. Resmini, and A. Salomone, “Status Report on Radioisotope Production for Biomedical Purposes at Milan AVF Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper GP-02, pp. 693-695. 
[n]	A. A. Hassan, C. L. Fink, and G. Rosing, “A Beam Characterization of H- Particles”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1504-1507. 
[n]	D. G. Cole, G. Machicoane, T. Ropponen, L. T. Sun, and L. Tobos, “A Low Power Survey of Radial-Offset Axial Sputtering and High Intensity Uranium Production from Axial Sputtering in SuSI”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT016, pp. 69-71. 
[n]	L. M. Volpe et al., “High Heat Load Front Ends for Sirius”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 324-326. doi:10.18429/JACoW-MEDSI2016-WEPE06
[n]	D. A. Reis, “Recent Results from SPPS, Including Pump-Probe Timing Measurements”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOB002, pp. XX-XX. 
[n]	W. Leonhardt et al., “Thermal Management of Magnetic Focussing Horns Used in the Narrow and Broad Band Neutrino Beams at the AGS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1740-1743. 
[n]	M. Saveri Silva, R. R. Geraldes, A. Gilmour, T. A. M. Ruijl, and R. M. Schneider, “Thermal Management and Crystal Clamping Concepts for the New High-Dynamics DCM for Sirius”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 194-197. doi:10.18429/JACoW-MEDSI2016-TUPE15
[n]	C. C. Hall, J. P. Edelen, J. A. Einstein-Curtis, and M. C. Kilpatrick, “BPM Analysis with Variational Autoencoders”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 543-545. doi:10.18429/JACoW-IPAC2022-MOPOTK038
[n]	P. Hurh, J. Morgan, and S. Tariq, “Comprehensive Electro-Magnetic, Thermal, and Structural Finite Element Analysis of the Lithium Collection Lens at the FNAL Antiproton Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB011, pp. 641-643. 
[n]	L. R. Doolittle et al., “Linac Design for the FERMI Project”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP015, pp. 61-63. 
[n]	M. H. Wallner, R. H. Farias, A. P. B. Lima, and F. Santiago de Oliveira, “Novel 500 MHz Solid State Power Amplifier Module Development at Sirius”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2349-2351. doi:10.18429/JACoW-IPAC2021-TUPAB358
[n]	S. L. Bogomolov et al., “Recent Development in ECR Ion Sources at FLNR JINR”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRYOR01, pp. 203-207. 
[n]	D. Rapisarda et al., “Indirect Measurement of Power Deposition on the IFMIF/EVEDA Beam Dump by means of Radiation Chambers”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC126, pp. 1314-1316. 
[n]	S. L. Kramer, Y. Cho, and E. A. Crosbie, “Achromatic Lattice Comparison for Light Sources”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 749-752. 
[n]	R. T. Avery, H. P. Hernandez, R. M. Reimers, and W. W. Salsig, “Mechanical Design of Compressor Test Apparatus for Electron Ring Accelerator Research”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1050-1055. 
[n]	R. P. Fliller et al., “The Two Stage Crystal Collimator for RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH082, pp. 1399-1401. 
[n]	J. L. Turner et al., “Beam Stability Studies in the LCLS Linac”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH051, pp. 94-97. 
[n]	L. M. Russo, “Software and Gateware Development for Sirius BPM Electronics Using a Service-Oriented Architecture”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1736-1741. doi:10.18429/JACoW-ICALEPCS2017-THPHA149
[n]	M. Gyr, K. H. Kissler, S. Peraire, and J. D. Pahud, “Simultaneous Slow Resonant Extractions from the SPS with Horizontal Tune-Split”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2997-3000. 
[n]	M. P. Reiser, “Space Charge Effects and Current Limitations in Cyclotrons”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper C-006, pp. XX-XX. 
[n]	C. Benvenuti, “Invited Paper: Recent Advances in Vacuum Techniques for Accelerators”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper M01, pp. 540-546. 
[n]	J. Gareyte, A. Hilaire, and F. Schmidt, “Dynamic Aperture and Long Term Particle Stability in the Presence of Strong Sextupoles in the CERN SPS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1376-1379. 
[n]	N. Klein, “High Tc Materials for Microwave Applications: Update on Activities, Progress and Trends”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91D03, pp. XX-XX. 
[n]	M. Slater, W. Miller, and W. Slater, “Developing a Clinical Proton Accelerator Facility: Consortium-Assisted Technology Transfer”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 532-537. 
[n]	B. Copy, E. Mandilara, I. Prieto Barreiro, and F. Varela, “Monitoring of CERN's Data Interchange Protocol (DIP) System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1797-1800. doi:10.18429/JACoW-ICALEPCS2017-THPHA162
[n]	A. Kasliwal and T. G. Pandit, “A Distributed CAN Bus Based Embedded Control System for 750 keV DC Accelerator”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD28, pp. 197-199. 
[n]	E. Carlier et al., “The LEP Beam Dumping System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2429-2432. 
[n]	Y. Jongen et al., “Current Status of the IBA C400 Cyclotron Project for Hadron Therapy”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP120, pp. 1806-1808. 
[n]	V. Guidi et al., “Highly Efficient Crystal Deflector for Channeling Extraction of a Proton Beam from Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB016, pp. 1655-1657. 
[n]	J. T??ckmantel, “SPLinac: Computer Simulations of SC Linac RF Systems with Beam”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper SA007, pp. XX-XX. 
[n]	M. A. K. Othman et al., “Initial Results of High-Gradient Breakdown Tests for W-Band Accelerating Structures”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3769-3771. doi:10.18429/JACoW-IPAC2019-THPGW080
[n]	C. Dimopoulou et al., “Simulations of Stochastic Cooling of Antiprotons in the Collector Ring CR”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper TUIOB02, pp. 58-63. 
[n]	F. Furuta et al., “RF Performance of Multi-cell Scale Niobium SRF Cavities Prepared with HF Free Bipolar Electro-polishing at Faraday Technology”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 567-570. doi:10.18429/JACoW-SRF2017-TUPB074
[n]	J. R. Simanton, “Calibrating Induction Electrodes Using Cathode Ray Beams”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 932-934. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search