Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. J. Back, “Physics Studies for the LBNF Graphite Target Design”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3123-3125. doi:10.18429/JACoW-IPAC2021-WEPAB212
[n] R. A. Kostin et al., “Superconducting Travelling Wave Accelerating Structure Development”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB011, pp. 1085-1087.
[n] Z. Pan et al., “Beam-Loading Transients and Bunch Shape in the Operation of Passive Harmonic Cavities in the ALS-U”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3298-3300. doi:10.18429/JACoW-IPAC2018-THPAK037
[n] T. W. Koeth, “Beam Physics Demonstrations with the Rutgers 12-Inch Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT025, pp. 369-371.
[n] B. Shepherd, “Assessing and increasing the sustainability of future accelerator based facilities”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEYD1, unpublished.
[n] H. J. Kwon, K. H. Paek, K. J. Chung, C. Y. Kim, and K. H. Chung, “Klystron Power Supply for KOMAC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D017, pp. 118-120.
[n] M. Carl?á, G. Benedetti, Z. Mart?¡, and L. S. Nadolski, “Optimization of Turn-by-Turn Measurements at Soleil and Alba Light Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1686-1689. doi:10.18429/JACoW-IPAC2015-TUPJE035
[n] Y. A. Fomin et al., “First Operation of New Electron Beam Orbit Measurement System at SIBERIA-2”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC051, pp. 1186-1188.
[n] X. Buffat, W. Herr, N. Mounet, E. M?®tral, and T. Pieloni, “Head-on and Long range Beam-beam Interactions in the LHC: Effective Tune Spread and Beam Stability due to Landau Damping”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI035, pp. 1421-1423.
[n] S. Heifets and H. U. Wienands, “On the Shape of the Betatron Side-Band”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A08, pp. 1036-1038.
[n] A. D. Alarcon, “The Development of the Undulator Controls Module at the Linac Coherent Light Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP092, pp. 293-294.
[n] R. Visintini and D. M. Molaro, “Elettra Booster Magnet Power Supplies: One Year of Operations”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP019, pp. 1571-1573.
[n] G. N. Kulipanov et al., “Status of the Novosibirsk High Power Free Electron Laser”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper FRM101, pp. XX-XX.
[n] C. B?Âhme, J. L. Conradie, J. Dietrich, V. Kamerdzhiev, and T. Weis, “Gas Scintillation Beam Profile Monitor at COSY J??lich”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM005, pp. 98-100.
[n] C. Dickerson, B. Mustapha, and C. E. Peters, “Integrating the TRACK Beam Simulation Code to Improve ATLAS Operations”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEM1C02, pp. 169-171.
[n] T. Sakaue and A. Takagi, “New Light Link System for High Voltage Terminal”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3983-3986.
[n] R. C. Gupta et al., “Design Construction and Test Results of a HTS Solenoid for Energy Recovery Linac”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP163, pp. 1127-1129.
[n] T. A. Miller, J. N. Aronson, D. M. Gassner, and A. I. Pikin, “RHIC Electron-Lens Beam Profile Monitoring”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUPG039, pp. 213-215.
[n] P. Castro, “Performance of the TESLA Test Facility Linac”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI036, pp. 876-878.
[n] S. Zorzetti, N. Galindo Munoz, M. Wendt, and L. Fanucci, “Stretched-Wire Techniques and Measurements for the Alignment of a 15GHz RF-BPM for CLIC”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 487-491. doi:10.18429/JACoW-IBIC2015-TUPB063
[n] N. S. Sereno, M. Borland, and H. Shang, “Advanced Photon Source Booster Synchrotron Low-Emittance Lattice Commissioning Results”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPA010, pp. 247-249.
[n] M. Borland, “An Improved Thermionic Microwave Gun and Emittance-Preserving Transport Line”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3015-3018.
[n] E. Onillon, “Feedback Design Method Review and Comparison”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA17, pp. 1109-1111.
[n] H. Ishimaru, S. Fukumoto, K. Itoh, K. Muto, and T. Sakaue, “750 KeV Beam Monitoring at the KEK”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper D05, pp. 202-207.
[n] M. J. Boland, Y. E. Tan, and T. M. Mitsuhashi, “Coronagraph Measurements on the Australian Synchrotron Storage Ring Optical Diagnostic Beamline”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1895-1898. doi:10.18429/JACoW-IPAC2016-TUPOW055
[n] N. Juntong and K. Pharaphan, “The Optimized X-ray Target of Electron Linear Accelerator for Radiotherapy”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1933-1935. doi:10.18429/JACoW-IPAC2016-TUPOY016
[n] J. A. Ferreira Somoza and P. Chiggiato, “CERN Vacuum System Activities during the Long Shutdown 1: The LHC's injector chain.”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2291-2293. doi:10.18429/JACoW-IPAC2014-WEPME018
[n] J. Martinez Marin and B. Mustapha, “Real-time Bayesian Optimization with Deep Kernel Learning and NN-Prior Mean for Accelerator Operations”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4420-4423. doi:10.18429/JACoW-IPAC2023-THPL004
For LaTeX
Use Complete Form
For BibTeX
References
- J. J. Back, “Physics Studies for the LBNF Graphite Target Design”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3123-3125.
- R. A. Kostin et al., “Superconducting Travelling Wave Accelerating Structure Development”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB011, pp. 1085-1087.
- Z. Pan et al., “Beam-Loading Transients and Bunch Shape in the Operation of Passive Harmonic Cavities in the ALS-U”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3298-3300.
- T. W. Koeth, “Beam Physics Demonstrations with the Rutgers 12-Inch Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT025, pp. 369-371.
- B. Shepherd, “Assessing and increasing the sustainability of future accelerator based facilities”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEYD1, this conference.
- H. J. Kwon, K. H. Paek, K. J. Chung, C. Y. Kim, and K. H. Chung, “Klystron Power Supply for KOMAC”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D017, pp. 118-120.
- M. Carl?á, G. Benedetti, Z. Mart?¡, and L. S. Nadolski, “Optimization of Turn-by-Turn Measurements at Soleil and Alba Light Sources”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1686-1689.
- Y. A. Fomin et al., “First Operation of New Electron Beam Orbit Measurement System at SIBERIA-2”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC051, pp. 1186-1188.
- X. Buffat, W. Herr, N. Mounet, E. M?®tral, and T. Pieloni, “Head-on and Long range Beam-beam Interactions in the LHC: Effective Tune Spread and Beam Stability due to Landau Damping”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI035, pp. 1421-1423.
- S. Heifets and H. U. Wienands, “On the Shape of the Betatron Side-Band”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3A08, pp. 1036-1038.
- A. D. Alarcon, “The Development of the Undulator Controls Module at the Linac Coherent Light Source”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP092, pp. 293-294.
- R. Visintini and D. M. Molaro, “Elettra Booster Magnet Power Supplies: One Year of Operations”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP019, pp. 1571-1573.
- G. N. Kulipanov et al., “Status of the Novosibirsk High Power Free Electron Laser”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper FRM101, pp. XX-XX.
- C. B?Âhme, J. L. Conradie, J. Dietrich, V. Kamerdzhiev, and T. Weis, “Gas Scintillation Beam Profile Monitor at COSY J??lich”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM005, pp. 98-100.
- C. Dickerson, B. Mustapha, and C. E. Peters, “Integrating the TRACK Beam Simulation Code to Improve ATLAS Operations”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEM1C02, pp. 169-171.
- T. Sakaue and A. Takagi, “New Light Link System for High Voltage Terminal”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3983-3986.
- R. C. Gupta et al., “Design Construction and Test Results of a HTS Solenoid for Energy Recovery Linac”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP163, pp. 1127-1129.
- T. A. Miller, J. N. Aronson, D. M. Gassner, and A. I. Pikin, “RHIC Electron-Lens Beam Profile Monitoring”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper TUPG039, pp. 213-215.
- P. Castro, “Performance of the TESLA Test Facility Linac”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI036, pp. 876-878.
- S. Zorzetti, N. Galindo Munoz, M. Wendt, and L. Fanucci, “Stretched-Wire Techniques and Measurements for the Alignment of a 15GHz RF-BPM for CLIC”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 487-491.
- N. S. Sereno, M. Borland, and H. Shang, “Advanced Photon Source Booster Synchrotron Low-Emittance Lattice Commissioning Results”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPA010, pp. 247-249.
- M. Borland, “An Improved Thermionic Microwave Gun and Emittance-Preserving Transport Line”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3015-3018.
- E. Onillon, “Feedback Design Method Review and Comparison”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA17, pp. 1109-1111.
- H. Ishimaru, S. Fukumoto, K. Itoh, K. Muto, and T. Sakaue, “750 KeV Beam Monitoring at the KEK”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper D05, pp. 202-207.
- M. J. Boland, Y. E. Tan, and T. M. Mitsuhashi, “Coronagraph Measurements on the Australian Synchrotron Storage Ring Optical Diagnostic Beamline”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1895-1898.
- N. Juntong and K. Pharaphan, “The Optimized X-ray Target of Electron Linear Accelerator for Radiotherapy”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1933-1935.
- J. A. Ferreira Somoza and P. Chiggiato, “CERN Vacuum System Activities during the Long Shutdown 1: The LHC's injector chain.”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2291-2293.
- J. Martinez Marin and B. Mustapha, “Real-time Bayesian Optimization with Deep Kernel Learning and NN-Prior Mean for Accelerator Operations”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL004, pp. 4420-4423.
Back to search