Favourites
For Word
[n] J. Cinnamon and K. Mahoney, “Modular Reliability Modeling of the TJNAF Personnel Safety System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P061, pp. 3678-3680.
[n] K. Agari, H. Akiyama, Y. Morino, Y. Sato, and A. Toyoda, “Development of the Power Supply Control System for J-PARC Hadron Experimental Facility”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 697-700. doi:10.18429/JACoW-ICALEPCS2017-TUPHA121
[n] A. Alekou, “Mice Status”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE042, pp. 3443-3445.
[n] K. Beilenhoff, M. Droba, H. L. Hartnagel, and U. Ratzinger, “180 Degree Bending Systems for High Current Heavy Ion Linacs”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B07, pp. 1483-1485.
[n] Y. Yan, C. Wang, Z. Wang, L. Zhao, and Y. Zhu, “The Beamline Experiments Scheduling Software”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL003, pp. 33-35.
[n] M. Kreider et al., “`WhiteRabbit' - A novel, high precision timing system”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper FRCOMA01, pp. 192-194.
[n] R. Baer, M. Schwickert, and T. Fleck, “Requirements and Coherent Realization of the HICAT Control System Functionality for Test, Commissioning, and Operation”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB29, pp. 674-676.
[n] J. L. Giorgetta, A. Lestrade, A. Mary, and K. Tavakoli, “Design of Girders on the New Upgrade Lattice at Soleil”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 218. doi:10.18429/JACoW-MEDSI2020-WEOA02
[n] R. Noble, “Muon Collider Progress”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THZ04A, pp. 108-112.
[n] W. H. Tan et al., “Commissioning of a High-Gradient X-Band RF Gun Powered by Short RF Pulses from a Wakefield Accelerator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 652-655. doi:10.18429/JACoW-IPAC2022-MOPOMS014
[n] G. Gemme et al., “Experimental Results on SCRF Cavity Prototypes for Gravitational Wave Detection”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP31, pp. 106-110.
[n] M. H. R. Donald and J. M. Paterson, “An Investigation of the 'Flip-Flop' Beam-Beam Effect in SPEAR”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3580-3583.
[n] G. Gemme et al., “SCRF Detectors for Gravitational Waves”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUO10, pp. 258-264.
[n] C. E. Adolphsen, P. J. Emma, T. H. Fieguth, and W. L. Spence, “Chromatic Correction in the SLC Bunch Length Compressors”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 503-506.
[n] X. H. Liao, Y. Li, M. F. Meng, X. X. Wang, and Q. L. Zhao, “Study on the Oxide Cathode for HIRFL-CSR Electron Cooler”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper THPMCP012, pp. 160-163.
[n] H. Rudd, I. Haber, and M. Reiser, “Simulation Studies of Emittance Growth from Image-Charge and Focusing-Field Nonlinearities in a Periodic Solenoidal Channel”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1120-1123.
[n] Y. C. Nie, R. Schmidt, J. A. Uythoven, C. Wiesner, D. Wollmann, and M. Zerlauth, “Concept of Beam-Related Machine Protection for the Future Circular Collider”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4085-4088. doi:10.18429/JACoW-IPAC2019-THPRB113
For LaTeX
Use Complete Form
For BibTeX
References
- J. Cinnamon and K. Mahoney, “Modular Reliability Modeling of the TJNAF Personnel Safety System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P061, pp. 3678-3680.
- K. Agari, H. Akiyama, Y. Morino, Y. Sato, and A. Toyoda, “Development of the Power Supply Control System for J-PARC Hadron Experimental Facility”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 697-700.
- A. Alekou, “Mice Status”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE042, pp. 3443-3445.
- K. Beilenhoff, M. Droba, H. L. Hartnagel, and U. Ratzinger, “180 Degree Bending Systems for High Current Heavy Ion Linacs”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP4B07, pp. 1483-1485.
- Y. Yan, C. Wang, Z. Wang, L. Zhao, and Y. Zhu, “The Beamline Experiments Scheduling Software”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL003, pp. 33-35.
- M. Kreider et al., “`WhiteRabbit' - A novel, high precision timing system”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper FRCOMA01, pp. 192-194.
- R. Baer, M. Schwickert, and T. Fleck, “Requirements and Coherent Realization of the HICAT Control System Functionality for Test, Commissioning, and Operation”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB29, pp. 674-676.
- J. L. Giorgetta, A. Lestrade, A. Mary, and K. Tavakoli, “Design of Girders on the New Upgrade Lattice at Soleil”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 218.
- R. Noble, “Muon Collider Progress”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THZ04A, pp. 108-112.
- W. H. Tan et al., “Commissioning of a High-Gradient X-Band RF Gun Powered by Short RF Pulses from a Wakefield Accelerator”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 652-655.
- G. Gemme et al., “Experimental Results on SCRF Cavity Prototypes for Gravitational Wave Detection”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP31, pp. 106-110.
- M. H. R. Donald and J. M. Paterson, “An Investigation of the 'Flip-Flop' Beam-Beam Effect in SPEAR”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3580-3583.
- G. Gemme et al., “SCRF Detectors for Gravitational Waves”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUO10, pp. 258-264.
- C. E. Adolphsen, P. J. Emma, T. H. Fieguth, and W. L. Spence, “Chromatic Correction in the SLC Bunch Length Compressors”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 503-506.
- X. H. Liao, Y. Li, M. F. Meng, X. X. Wang, and Q. L. Zhao, “Study on the Oxide Cathode for HIRFL-CSR Electron Cooler”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper THPMCP012, pp. 160-163.
- H. Rudd, I. Haber, and M. Reiser, “Simulation Studies of Emittance Growth from Image-Charge and Focusing-Field Nonlinearities in a Periodic Solenoidal Channel”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1120-1123.
- Y. C. Nie, R. Schmidt, J. A. Uythoven, C. Wiesner, D. Wollmann, and M. Zerlauth, “Concept of Beam-Related Machine Protection for the Future Circular Collider”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4085-4088.
Back to search