Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. A. Uythoven et al., “Beam Induced Heating of the SPS Fast Pulsed Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT035, pp. 623-625.
[n] G. Berden et al., “Chirped-Laser Based Electron Bunch Length Monitor”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAB008, pp. 519-523.
[n] R. Nagaoka et al., “Study of Lower Emittance Optics Using Multi-Bend-Achromat Lattice at SOLEIL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA007, pp. 76-78.
[n] S. Luengo et al., “SPD Very Front End Electronics”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_068.
[n] X. Li, H. Sun, F. C. Zhao, and J. Y. Zhu, “Design of Rapid Tuning System for a Ferrite-Loaded Cavity with Heavy Beam Loading”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4203-4206. doi:10.18429/JACoW-IPAC2017-THPIK048
[n] S. Battisti, P. Heymans, J. Kenaghan, J. Philippe, F. Rohner, and E. Sigaud, “A Flexible Wide-Band Analouge Network for Direct Signal Display on Operator Consoles”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2189-2192.
[n] A. Kanareykin, E. Nenasheva, S. Karmanenko, A. Dedyk and V. Yakovlev, “Low-Loss Ferroelectric for Accelerator Application”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT095, pp. 4305-4307.
[n] B. J. Holzer, R. De Maria, R. Appleby, and L. N. S. Thompson, “LSS Layout Optimizations for Low-beta Optics for the HL-LHC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA058, pp. 2639-2641.
[n] V. Agoritsas et al., “Measurement and Monitoring of the Ejected Proton Beam 58" of the CERN Proton Synchrotron"”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1155-1161.
[n] M. Klein et al., “Modeling the Low-Alpha-Mode at ANKA with the Accelerator Toolbox”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP005, pp. 1510-1512.
[n] X. D. Zhang, X. P. Ouyang, B. Sun, X. J. Tan, and X. F. Weng, “Research on X Ray Characteristics Produced by Highenergy Picosecond Electron Beam Shooting”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 729-731. doi:10.18429/JACoW-LINAC2018-THPO021
[n] Y. Zhang and G. D. Alton, “A High-Charge-State Acceleration Scheme for Potential Upgrade of the HRIBF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH017, pp. 2117-2119.
[n] T. Kondoh, T. Kozawa, S. Tagawa, T. Tomosada, J. Yang, and Y. Yoshida, “An Advantage of the Equivalent Velocity Spectroscopy for Femtsecond Pulse Radiolysis”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP038, pp. 2533-2535.
[n] H. Ghasem, E. Ahmadi, and D. Einfeld, “Booster Design for ILSF”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC025, pp. 2960-2962.
[n] K. Gu, S. An, X. J. Liu, and W. Zhang, “A Method of Implementing HIRFL-CSR Chopper Controls”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA019, pp. 3185-3186.
[n] O. Seify, H. Ghasem, S. Kashani, and J. Rahighi, “Design and Construction of a Prototype Sputter ion Pump in ILSF”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2323-2325. doi:10.18429/JACoW-IPAC2014-WEPME030
[n] S. Molloy, M. Lindroos, S. Peggs, R. Ainsworth, and J. M. Y. Ruber, “RF Modeling Plans for the European Spallation Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOODB02, pp. 56-58.
[n] S. Molloy, R. Ainsworth, and J. M. Y. Ruber, “Multipacting Analysis for the Superconducting RF Cavity HOM Couplers in ESS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC050, pp. 190-192.
[n] F. Zimmermann, O. S. Br??ning, and M. Klein, “The LHeC Project Development Beyond 2012”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR076, pp. 1999-2001.
[n] H. Podlech et al., “Status of the Development of a Superconducting 352 MHz CH-Prototype Cavity”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP29, pp. 372-374.
[n] S. Battisti, J. F. Bottollier, B. Frammery, B. Szeless, and M. Van Rooy, “Beam Instrumentation in the LEP Pre-Injector”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 570-573.
[n] L. L. Tang et al., “Application of the Gige Vision Digital Camera for Beam Diagnostics in HLS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE032, pp. 1041-1043.
[n] L. Ge et al., “Multipacting Simulations of TTF-III Coupler Components”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS041, pp. 2436-2438.
[n] R. R. Geraldes et al., “Granite Benches for Sirius X-ray Optical Systems”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 361-364. doi:10.18429/JACoW-MEDSI2018-THPH12
[n] M. Saveri Silva et al., “Four-Bounce Crystal Monochromators for the Sirius/LNLS Beamlines”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 29. doi:10.18429/JACoW-MEDSI2020-MOPB04
[n] A. Khaleghi, K. Mahmoudi, M. Oghbaie, M. Akbari, and J. Rahighi, “Conceptual Design of Developing a Mobile App for Distributed Information Services for Control Systems (DISCS)”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 315-317. doi:10.18429/JACoW-ICALEPCS2017-TUMPL06
[n] Y. Zhang and P. E. Mueller, “An RFQ Injection System for the HRIBF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB087, pp. 1004-1006.
[n] P. Xu, T. R. Bieler, and N. T. Wright, “Comparison of the Lattice Thermal Conductivity of Superconducting Tantalum and Niobium”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 148-153. doi:10.18429/JACoW-SRF2019-MOP041
[n] A. E. Candel et al., “Numerical Verification of the Power Transfer and Wakefield Coupling in the CLIC Two-beam Accelerator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOCS2, pp. 51-55.
[n] G. Berden et al., “Single Shot Electron-Beam Bunch Length Measurements”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper IT05, pp. XX-XX.
[n] J. Pasternak et al., “Status of the PRISM FFAG Design for the Next Generation Muon-to-Electron Conversion Experiment”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOEPPB003, pp. 79-81.
[n] Z. Li et al., “Dark Current Simulation for the CLIC T18 High Gradient Structure”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP046, pp. 2101-2103.
[n] F. Jackson, D. Angal-Kalinin, J. K. Jones, P. H. Williams, and A. Wolski, “Longitudinal Beam Transport in the ALICE IR-FEL Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA063, pp. 2262-2264.
[n] J. P. Ricaud, N. Hubert, M. Labat, C. Laulh?â, and H. Enquist, “The TimIQ Synchronization for Sub-Picoseconds Delay Adjustment”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 604-607. doi:10.18429/JACoW-ICALEPCS2017-TUPHA083
[n] H. Xu et al., “The Commission of Hefei Light Source After Reconstruction”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE076, pp. 3967-3969.
[n] A. H. Mohammadzadeh, H. Afarideh, and S. M. Haji-Saeid, “Improving the Energy Resolution of the 30 MeV Cyclotron Proton Using the Designed Achromatic System”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-39, pp. 314-317.
[n] P. Kowina et al., “Pre-amplifier Impedance Matching for Cryogenic BPMs”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD20, pp. 347-349.
[n] M. Afkhami Karaei, H. Afarideh, S. Azizpourian, R. Solhju, J.-S. Chai, and M. Ghergherehchi, “Investigation of Central Region Design of 10MeV AVF Cyclotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1253-1255. doi:10.18429/JACoW-IPAC2016-TUPMR012
[n] M. Katoh et al., “Microfabrication of Relativistic Electron Beam by Laser and its Application to THz Coherent Synchrotron Radiation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC041, pp. 163-165.
[n] F. Saeidi, S. Dastan, S. Fatehi, J. Rahighi, and M. Razazian, “ILSF Booster Magnets for the New Low Emittance Lattice”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4145-4147. doi:10.18429/JACoW-IPAC2019-THPTS018
[n] N. Rahimpour Kalkhoran, H. Afarideh, M. Afkhami Karaei, S. Sabounchi, and M. Ghergherehchi, “Magnet Optimization and Beam Dynamic Calculation of the 18 MeV Cyclotron by TOSCA and CYCLONE Codes”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 36-38. doi:10.18429/JACoW-Cyclotrons2016-MODM02
[n] R. Tomas, J. L. Abelleira, S. Russenschuck, F. Zimmermann, and N. R. Bernard, “Design Status of LHeC Linac-Ring Interaction Region”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPZ013, pp. 2796-2798.
[n] A. Bungau et al., “Design of the Photon Collimators for the ILC Positron Helical Undulator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP008, pp. 565-567.
[n] B. Fateh, H. Afarideh, and S. M. Haji-Saeid, “Production of 67Ga by Irradiation of Natural Zinc with Deuterons in NRCAM Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-06, pp. 553-555.
[n] H. G. P. de Oliveira, S. N. C. Bueno, L. Sanfelici, and M. B. da Silva, “The LNLS Metrology Building - Environmental Control Results”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 143-146. doi:10.18429/JACoW-MEDSI2018-TUPH43
[n] J. Pasternak and L. J. Jenner, “Design of a Rapid Cycling Synchrotron for the Final Stage of Acceleration in a Common Proton Driver for a Neutrino Factory and a Spallation Neutron Source Based on Megawatt Upgrades to ISIS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS103, pp. 2751-2753.
[n] J. Claus, M. Cornacchia, E. Courant, F. Dell, A. Garren, and G. Parzen, “On Improving the Chromatic Effects of Storage Rings with Antisymmetric Insertions”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2451-2454.
[n] M. Afkhami Karaei et al., “Developed Numerical Code Based on the Effects of Space Charge in Central Region of 10 MeV Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 49-52. doi:10.18429/JACoW-Cyclotrons2016-MOP03
[n] M. Saveri Silva, R. R. Geraldes, A. Gilmour, T. A. M. Ruijl, and R. M. Schneider, “Thermal Management and Crystal Clamping Concepts for the New High-Dynamics DCM for Sirius”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 194-197. doi:10.18429/JACoW-MEDSI2016-TUPE15
[n] T. J. Ma et al., “Bunch-by-bunch Beam Current Monitor for HLS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE030, pp. 1035-1037.
[n] Z. G. Zong et al., “Tests on the 1.3 GHz Low Loss Single-Cell RF Superconducting Large Grain Cavities of IHEP”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP168, pp. 943-945.
[n] J. S. Kolski, E. Bjorklund, M. J. Hall, M. P. Martinez, and F. E. Shelley, “Experimental Results from a Diagnostic" Pulse for Single-Particle-Like Beam Position Measurements during Accumulation/Production Mode in the Los Alamos Proton Storage Ring"”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA15, pp. 330-332.
[n] S. G. Ebner et al., “SwissFEL - Beam Synchronous Data Acquisition - The First Year”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 276-279. doi:10.18429/JACoW-ICALEPCS2017-TUCPA06
[n] G. Chiozzi, A. Longinotti, P. Santin, and R. Cirami, “Study of Portability of VLT Instrumentation Software to ACS”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA10, pp. 337-339.
[n] J. L. Turner et al., “Beam Stability Studies in the LCLS Linac”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH051, pp. 94-97.
For LaTeX
Use Complete Form
For BibTeX
References
- J. A. Uythoven et al., “Beam Induced Heating of the SPS Fast Pulsed Magnets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT035, pp. 623-625.
- G. Berden et al., “Chirped-Laser Based Electron Bunch Length Monitor”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAB008, pp. 519-523.
- R. Nagaoka et al., “Study of Lower Emittance Optics Using Multi-Bend-Achromat Lattice at SOLEIL”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA007, pp. 76-78.
- S. Luengo et al., “SPD Very Front End Electronics”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_068.
- X. Li, H. Sun, F. C. Zhao, and J. Y. Zhu, “Design of Rapid Tuning System for a Ferrite-Loaded Cavity with Heavy Beam Loading”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4203-4206.
- S. Battisti, P. Heymans, J. Kenaghan, J. Philippe, F. Rohner, and E. Sigaud, “A Flexible Wide-Band Analouge Network for Direct Signal Display on Operator Consoles”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2189-2192.
- A. Kanareykin, E. Nenasheva, S. Karmanenko, A. Dedyk and V. Yakovlev, “Low-Loss Ferroelectric for Accelerator Application”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT095, pp. 4305-4307.
- B. J. Holzer, R. De Maria, R. Appleby, and L. N. S. Thompson, “LSS Layout Optimizations for Low-beta Optics for the HL-LHC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA058, pp. 2639-2641.
- V. Agoritsas et al., “Measurement and Monitoring of the Ejected Proton Beam 58" of the CERN Proton Synchrotron"”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1155-1161.
- M. Klein et al., “Modeling the Low-Alpha-Mode at ANKA with the Accelerator Toolbox”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP005, pp. 1510-1512.
- X. D. Zhang, X. P. Ouyang, B. Sun, X. J. Tan, and X. F. Weng, “Research on X Ray Characteristics Produced by Highenergy Picosecond Electron Beam Shooting”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 729-731.
- Y. Zhang and G. D. Alton, “A High-Charge-State Acceleration Scheme for Potential Upgrade of the HRIBF”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH017, pp. 2117-2119.
- T. Kondoh, T. Kozawa, S. Tagawa, T. Tomosada, J. Yang, and Y. Yoshida, “An Advantage of the Equivalent Velocity Spectroscopy for Femtsecond Pulse Radiolysis”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP038, pp. 2533-2535.
- H. Ghasem, E. Ahmadi, and D. Einfeld, “Booster Design for ILSF”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC025, pp. 2960-2962.
- K. Gu, S. An, X. J. Liu, and W. Zhang, “A Method of Implementing HIRFL-CSR Chopper Controls”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA019, pp. 3185-3186.
- O. Seify, H. Ghasem, S. Kashani, and J. Rahighi, “Design and Construction of a Prototype Sputter ion Pump in ILSF”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2323-2325.
- S. Molloy, M. Lindroos, S. Peggs, R. Ainsworth, and J. M. Y. Ruber, “RF Modeling Plans for the European Spallation Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOODB02, pp. 56-58.
- S. Molloy, R. Ainsworth, and J. M. Y. Ruber, “Multipacting Analysis for the Superconducting RF Cavity HOM Couplers in ESS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC050, pp. 190-192.
- F. Zimmermann, O. S. Br??ning, and M. Klein, “The LHeC Project Development Beyond 2012”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR076, pp. 1999-2001.
- H. Podlech et al., “Status of the Development of a Superconducting 352 MHz CH-Prototype Cavity”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP29, pp. 372-374.
- S. Battisti, J. F. Bottollier, B. Frammery, B. Szeless, and M. Van Rooy, “Beam Instrumentation in the LEP Pre-Injector”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 570-573.
- L. L. Tang et al., “Application of the Gige Vision Digital Camera for Beam Diagnostics in HLS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE032, pp. 1041-1043.
- L. Ge et al., “Multipacting Simulations of TTF-III Coupler Components”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS041, pp. 2436-2438.
- R. R. Geraldes et al., “Granite Benches for Sirius X-ray Optical Systems”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 361-364.
- M. Saveri Silva et al., “Four-Bounce Crystal Monochromators for the Sirius/LNLS Beamlines”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 29.
- A. Khaleghi, K. Mahmoudi, M. Oghbaie, M. Akbari, and J. Rahighi, “Conceptual Design of Developing a Mobile App for Distributed Information Services for Control Systems (DISCS)”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 315-317.
- Y. Zhang and P. E. Mueller, “An RFQ Injection System for the HRIBF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB087, pp. 1004-1006.
- P. Xu, T. R. Bieler, and N. T. Wright, “Comparison of the Lattice Thermal Conductivity of Superconducting Tantalum and Niobium”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 148-153.
- A. E. Candel et al., “Numerical Verification of the Power Transfer and Wakefield Coupling in the CLIC Two-beam Accelerator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOOCS2, pp. 51-55.
- G. Berden et al., “Single Shot Electron-Beam Bunch Length Measurements”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper IT05, pp. XX-XX.
- J. Pasternak et al., “Status of the PRISM FFAG Design for the Next Generation Muon-to-Electron Conversion Experiment”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOEPPB003, pp. 79-81.
- Z. Li et al., “Dark Current Simulation for the CLIC T18 High Gradient Structure”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP046, pp. 2101-2103.
- F. Jackson, D. Angal-Kalinin, J. K. Jones, P. H. Williams, and A. Wolski, “Longitudinal Beam Transport in the ALICE IR-FEL Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA063, pp. 2262-2264.
- J. P. Ricaud, N. Hubert, M. Labat, C. Laulh?â, and H. Enquist, “The TimIQ Synchronization for Sub-Picoseconds Delay Adjustment”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 604-607.
- H. Xu et al., “The Commission of Hefei Light Source After Reconstruction”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE076, pp. 3967-3969.
- A. H. Mohammadzadeh, H. Afarideh, and S. M. Haji-Saeid, “Improving the Energy Resolution of the 30 MeV Cyclotron Proton Using the Designed Achromatic System”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-39, pp. 314-317.
- P. Kowina et al., “Pre-amplifier Impedance Matching for Cryogenic BPMs”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD20, pp. 347-349.
- M. Afkhami Karaei, H. Afarideh, S. Azizpourian, R. Solhju, J.-S. Chai, and M. Ghergherehchi, “Investigation of Central Region Design of 10MeV AVF Cyclotron”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1253-1255.
- M. Katoh et al., “Microfabrication of Relativistic Electron Beam by Laser and its Application to THz Coherent Synchrotron Radiation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC041, pp. 163-165.
- F. Saeidi, S. Dastan, S. Fatehi, J. Rahighi, and M. Razazian, “ILSF Booster Magnets for the New Low Emittance Lattice”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4145-4147.
- N. Rahimpour Kalkhoran, H. Afarideh, M. Afkhami Karaei, S. Sabounchi, and M. Ghergherehchi, “Magnet Optimization and Beam Dynamic Calculation of the 18 MeV Cyclotron by TOSCA and CYCLONE Codes”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 36-38.
- R. Tomas, J. L. Abelleira, S. Russenschuck, F. Zimmermann, and N. R. Bernard, “Design Status of LHeC Linac-Ring Interaction Region”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPZ013, pp. 2796-2798.
- A. Bungau et al., “Design of the Photon Collimators for the ILC Positron Helical Undulator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP008, pp. 565-567.
- B. Fateh, H. Afarideh, and S. M. Haji-Saeid, “Production of 67Ga by Irradiation of Natural Zinc with Deuterons in NRCAM Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper K-06, pp. 553-555.
- H. G. P. de Oliveira, S. N. C. Bueno, L. Sanfelici, and M. B. da Silva, “The LNLS Metrology Building - Environmental Control Results”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 143-146.
- J. Pasternak and L. J. Jenner, “Design of a Rapid Cycling Synchrotron for the Final Stage of Acceleration in a Common Proton Driver for a Neutrino Factory and a Spallation Neutron Source Based on Megawatt Upgrades to ISIS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS103, pp. 2751-2753.
- J. Claus, M. Cornacchia, E. Courant, F. Dell, A. Garren, and G. Parzen, “On Improving the Chromatic Effects of Storage Rings with Antisymmetric Insertions”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2451-2454.
- M. Afkhami Karaei et al., “Developed Numerical Code Based on the Effects of Space Charge in Central Region of 10 MeV Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 49-52.
- M. Saveri Silva, R. R. Geraldes, A. Gilmour, T. A. M. Ruijl, and R. M. Schneider, “Thermal Management and Crystal Clamping Concepts for the New High-Dynamics DCM for Sirius”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 194-197.
- T. J. Ma et al., “Bunch-by-bunch Beam Current Monitor for HLS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE030, pp. 1035-1037.
- Z. G. Zong et al., “Tests on the 1.3 GHz Low Loss Single-Cell RF Superconducting Large Grain Cavities of IHEP”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP168, pp. 943-945.
- J. S. Kolski, E. Bjorklund, M. J. Hall, M. P. Martinez, and F. E. Shelley, “Experimental Results from a Diagnostic" Pulse for Single-Particle-Like Beam Position Measurements during Accumulation/Production Mode in the Los Alamos Proton Storage Ring"”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA15, pp. 330-332.
- S. G. Ebner et al., “SwissFEL - Beam Synchronous Data Acquisition - The First Year”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 276-279.
- G. Chiozzi, A. Longinotti, P. Santin, and R. Cirami, “Study of Portability of VLT Instrumentation Software to ACS”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA10, pp. 337-339.
- J. L. Turner et al., “Beam Stability Studies in the LCLS Linac”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH051, pp. 94-97.
Back to search