Favourites
For Word
[n] Y. W. Kang et al., “Status and Performance of ORNL Spallation Neutron Source Accelerator Systems”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1007-1009. doi:10.18429/JACoW-IPAC2016-TUOAA02
[n] M. H. R. Donald et al., “A Superconducting Synchrotron Design Study at the Rutherford Laboratory”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 703-707.
[n] G. Portmann, C. Steier, and A. Young, “Commissioning of the First Elliptically Polarizing Undulator at the ALS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A04, pp. 2343-2345.
[n] K. Visser and H. W. Mostert, “Vacuum Control Systems at the NAC Cyclotrons”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-06, pp. 426-427.
[n] M. Bossi, G. D'Auria, M. Ferianis, and C. Rossi, “An Improved Beam Position Monitor System for the ELETTRA Linac and Transfer Line”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP088L, pp. 1722-1724.
[n] F. Nolden, D. Boehne, G. Berthes, B. Franzke, and A. Schwinn, “Stochastic Precooling of Neavy Fragments in the ESR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 579-582.
[n] R. Cimino and F. Sch?ñfers, “Soft X-ray Reflectivity and Photoelectron Yield of Technical Materials: Experimental Input for Instability Simulations in High Intensity Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2335-2337. doi:10.18429/JACoW-IPAC2014-WEPME034
[n] A. Harvey and R. D. Turner, “The LAMPF Switchyard Magnets”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 892-894.
[n] M. K?Ârfer, W. G?Âttmann, J. Kuhnhenn, and F. Wulf, “Beam Loss Position Monitor Using Cerenkov Radiation in Optical Fibers”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW026, pp. 301-303.
[n] N. Tsoupas et al., “Design of a Thin Quadrupole to be Used in the AGS Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS103, pp. 3723-3725.
[n] K. F. Johnson et al., “Commissioning of the Low-Energy Demonstration Accelerator (LEDA) Radio-Frequency Quadrupole (RFQ)”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA62, pp. 3528-3530.
[n] P. Chu et al., “SNS Application Programming Infrastructure and Physics Applications”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_076.
[n] D. Gonnella, J. J. Kaufman, P. N. Koufalis, and M. Liepe, “RF Losses from Trapped Flux in SRF Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2327-2330. doi:10.18429/JACoW-IPAC2016-WEPMR026
[n] V. Baldini et al., “The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 689-692. doi:10.18429/JACoW-ICALEPCS2015-WEPGF001
[n] I. Rodriguez, F. J. Bermejo, J. L. Munoz, and D. de Cos, “Calculation, Design and Manufacturing of a Resistive Quadrupole for the ESS-Bilbao Transfer Lines”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO012, pp. 2418-2420.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. W. Kang et al., “Status and Performance of ORNL Spallation Neutron Source Accelerator Systems”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1007-1009.
- M. H. R. Donald et al., “A Superconducting Synchrotron Design Study at the Rutherford Laboratory”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 703-707.
- G. Portmann, C. Steier, and A. Young, “Commissioning of the First Elliptically Polarizing Undulator at the ALS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2A04, pp. 2343-2345.
- K. Visser and H. W. Mostert, “Vacuum Control Systems at the NAC Cyclotrons”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-06, pp. 426-427.
- M. Bossi, G. D'Auria, M. Ferianis, and C. Rossi, “An Improved Beam Position Monitor System for the ELETTRA Linac and Transfer Line”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP088L, pp. 1722-1724.
- F. Nolden, D. Boehne, G. Berthes, B. Franzke, and A. Schwinn, “Stochastic Precooling of Neavy Fragments in the ESR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 579-582.
- R. Cimino and F. Sch?ñfers, “Soft X-ray Reflectivity and Photoelectron Yield of Technical Materials: Experimental Input for Instability Simulations in High Intensity Accelerators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2335-2337.
- A. Harvey and R. D. Turner, “The LAMPF Switchyard Magnets”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 892-894.
- M. K?Ârfer, W. G?Âttmann, J. Kuhnhenn, and F. Wulf, “Beam Loss Position Monitor Using Cerenkov Radiation in Optical Fibers”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POW026, pp. 301-303.
- N. Tsoupas et al., “Design of a Thin Quadrupole to be Used in the AGS Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS103, pp. 3723-3725.
- K. F. Johnson et al., “Commissioning of the Low-Energy Demonstration Accelerator (LEDA) Radio-Frequency Quadrupole (RFQ)”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA62, pp. 3528-3530.
- P. Chu et al., “SNS Application Programming Infrastructure and Physics Applications”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_076.
- D. Gonnella, J. J. Kaufman, P. N. Koufalis, and M. Liepe, “RF Losses from Trapped Flux in SRF Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2327-2330.
- V. Baldini et al., “The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 689-692.
- I. Rodriguez, F. J. Bermejo, J. L. Munoz, and D. de Cos, “Calculation, Design and Manufacturing of a Resistive Quadrupole for the ESS-Bilbao Transfer Lines”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO012, pp. 2418-2420.
Back to search