Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Feikes et al., “Specific Operation Modes at the Metrology Light Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2829-2832. doi:10.18429/JACoW-IPAC2016-WEPOW008
[n] W. Anders et al., “Renewal of Bessy Ii Rf System - Solid State Amplifiers and Hom Damped Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4127-4129. doi:10.18429/JACoW-IPAC2017-THPIK013
[n] S. D. Holmes, “Project X: A Multi-MW Proton Source at Fermilab”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUYRA01, pp. 1299-1303.
[n] N. Delerue et al., “Simulations of the Acceleration of Externally Injected Electrons in a Plasma Excited in the Linear Regime”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2542-2544. doi:10.18429/JACoW-IPAC2016-WEPMY003
[n] N. Solyak, H. Edwards, I. Gonin, M. Foley, T. Khabiboulline, and D. Mitchell, “Development of the 3.9 GHz 3rd Harmonic Cavity at FNAL”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP43, pp. 429-431.
[n] E. Karantzoulis, A. Carniel, S. Ferry, and S. Krecic, “Operational Advances at Elettra and its New Full Energy Injector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP020, pp. 2309-2311.
[n] B. Hanna, H. Jostlein, D. Plant, and S. Pruss, “In-Situ Non-Destructive Testing of Superconducting Dipoles in the Tevatron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 524-527.
[n] R. Gerig, S. Pruss, and F. Turkot, “Simulations of the Fermilab Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1123-1126.
[n] T. Ganbold et al., “Fast, Multi-band Photon Detectors based on Quantum Well Devices for Beam-monitoring in New Generation Light Sources”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP097, pp. 600-602.
[n] T. N. Khabiboulline et al., “3.9 GHz Superconducting Accelerating 9-cell Cavity Vertical Test Results”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN111, pp. 2295-2297.
[n] J. L. Conradie et al., “A Radioactive Ion Beam and Isotope Production Facility for iThemba LABS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 79-83. doi:10.18429/JACoW-RUPAC2016-WEYMH02
[n] F. Hug and R. G. Heine, “Injector Linac Stability Requirements for High Precision Experiments at MESA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 876-879. doi:10.18429/JACoW-IPAC2017-MOPVA014
[n] R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2177-2180.
[n] R. Enparantza, F. J. Bermejo, J. Lucas, and L. Uriarte, “Baseline Design of the ESS Bilbao Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP080, pp. 2704-2706.
[n] M. E. Castro Carballo, “Application of Single Crystal Diamonds (scCVD) as Beam Conditions Monitors at LHC”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA08, pp. 344-346.
[n] B. D. Hartsell, K. Anderson, J. Hylen, V. I. Sidorov, and S. Tariq, “LBNF Hadron Absorber: Mechanical Design and Analysis for 2.4MW Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3318-3320. doi:10.18429/JACoW-IPAC2015-WEPTY025
[n] G. Y. Hsiung et al., “Operation Experiences for the 1.5 GeV TLS Ultra-High Vacuum System”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16037, pp. XX-XX.
[n] J. Wang, I. A. Abid, R. T. Keane, and G. S. Sprau, “Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2381-2383. doi:10.18429/JACoW-IPAC2018-WEPMF008
[n] M. Korostelev, A. F. Grant, J. Lucas, O. B. Malyshev, and A. Wolski, “Beam Coupling Impedance in the ILC Damping Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP056, pp. 670-672.
[n] A. G. Alekseev et al., “Basic Design Parameters of a Small Size Isochronous Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F03, pp. XX-XX.
[n] M. Bossi, G. D'Auria, M. Ferianis, and C. Rossi, “An Improved Beam Position Monitor System for the ELETTRA Linac and Transfer Line”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP088L, pp. 1722-1724.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Feikes et al., “Specific Operation Modes at the Metrology Light Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2829-2832.
- W. Anders et al., “Renewal of Bessy Ii Rf System - Solid State Amplifiers and Hom Damped Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4127-4129.
- S. D. Holmes, “Project X: A Multi-MW Proton Source at Fermilab”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUYRA01, pp. 1299-1303.
- N. Delerue et al., “Simulations of the Acceleration of Externally Injected Electrons in a Plasma Excited in the Linear Regime”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2542-2544.
- N. Solyak, H. Edwards, I. Gonin, M. Foley, T. Khabiboulline, and D. Mitchell, “Development of the 3.9 GHz 3rd Harmonic Cavity at FNAL”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP43, pp. 429-431.
- E. Karantzoulis, A. Carniel, S. Ferry, and S. Krecic, “Operational Advances at Elettra and its New Full Energy Injector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP020, pp. 2309-2311.
- B. Hanna, H. Jostlein, D. Plant, and S. Pruss, “In-Situ Non-Destructive Testing of Superconducting Dipoles in the Tevatron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 524-527.
- R. Gerig, S. Pruss, and F. Turkot, “Simulations of the Fermilab Main Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1123-1126.
- T. Ganbold et al., “Fast, Multi-band Photon Detectors based on Quantum Well Devices for Beam-monitoring in New Generation Light Sources”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP097, pp. 600-602.
- T. N. Khabiboulline et al., “3.9 GHz Superconducting Accelerating 9-cell Cavity Vertical Test Results”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN111, pp. 2295-2297.
- J. L. Conradie et al., “A Radioactive Ion Beam and Isotope Production Facility for iThemba LABS”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 79-83.
- F. Hug and R. G. Heine, “Injector Linac Stability Requirements for High Precision Experiments at MESA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 876-879.
- R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2177-2180.
- R. Enparantza, F. J. Bermejo, J. Lucas, and L. Uriarte, “Baseline Design of the ESS Bilbao Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP080, pp. 2704-2706.
- M. E. Castro Carballo, “Application of Single Crystal Diamonds (scCVD) as Beam Conditions Monitors at LHC”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA08, pp. 344-346.
- B. D. Hartsell, K. Anderson, J. Hylen, V. I. Sidorov, and S. Tariq, “LBNF Hadron Absorber: Mechanical Design and Analysis for 2.4MW Operation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3318-3320.
- G. Y. Hsiung et al., “Operation Experiences for the 1.5 GeV TLS Ultra-High Vacuum System”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16037, pp. XX-XX.
- J. Wang, I. A. Abid, R. T. Keane, and G. S. Sprau, “Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2381-2383.
- M. Korostelev, A. F. Grant, J. Lucas, O. B. Malyshev, and A. Wolski, “Beam Coupling Impedance in the ILC Damping Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP056, pp. 670-672.
- A. G. Alekseev et al., “Basic Design Parameters of a Small Size Isochronous Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69F03, pp. XX-XX.
- M. Bossi, G. D'Auria, M. Ferianis, and C. Rossi, “An Improved Beam Position Monitor System for the ELETTRA Linac and Transfer Line”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP088L, pp. 1722-1724.
Back to search