Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Kuerzeder, M. Arnold, L. E. Juergensen, J. Pforr, N. Pietralla, and F. Hug, “Beam Break-up Measurements at the Recirculating Electron Accelerator S-DALINAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1714-1716. doi:10.18429/JACoW-IPAC2016-TUPOR025
[n] P. A. Zavodszky, “INNOVATI VE DESIGN PRINCIPLES OF SUSI ÔÇô SUPERCONDUCTING?SOURCE FOR IONS AT NSCL/MSU”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20B4, pp. XX-XX.
[n] A. J. Gonsalves et al., “Multi-GeV Plasma Acceleration Results at BELLA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1319-1324. doi:10.18429/JACoW-IPAC2015-TUYC2
[n] G. Riddone et al., “Technical Specification for the CLIC Two-Beam Module”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP028, pp. 607-609.
[n] S. Bauer, M. Pekeler, W. Anders, J. Knobloch, and W.-D. M?Âller, “Vertical and Horizontal Test Results of TESLA Cavities for BESSY”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP13, pp. 267-267.
[n] B. L. Bures et al., “X-ray Pole Figure Analysis on Fiber Textured Epitaxial Niobium Films for SRF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO080, pp. 418-421.
[n] M. Dach et al., “First Operational Experience with the Digital Beam Position Monitoring System for the Swiss Light Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A16, pp. 1809-1811.
[n] H. A. Day, M. J. Barnes, and L. M. C. Feliciano, “Impedance Studies of the LHC Injection Kicker Magnets for HL-LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 370-373. doi:10.18429/JACoW-IPAC2015-MOPJE038
[n] J. Bahrdt et al., “Measurements of the Lattice Modifications for the Cryogenic Undulator CPMU17”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4031-4034. doi:10.18429/JACoW-IPAC2016-THPOW039
[n] G. I. Cancelo et al., “Analysis of DESY-FLASH LLRF Measurements for the ILC Heavy Beam Loading Test”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP077, pp. 2189-2191.
[n] A. Kosicek, P. Leban, and K. B. Scheidt, “Beam Lifetime Measurements with Libera Brilliance”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM063, pp. 311-314.
[n] Y. Alexahin, E. Gianfelice-Wendt, and W. L. Marsh, “Tune Evaluation from Phased BPM Turn-by-turn Data”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE084, pp. 1179-1181.
[n] E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
[n] E. Barbero et al., “Accuracy Of The LEP Spectrometer Beam Orbit Monitors”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM03, pp. XX-XX.
[n] H. G. Khodzhibagiyan et al., “Prototype Superconducting Magnets for the NICA Accelerator Complex”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME028, pp. 3567-3569.
[n] R. Tikhoplav et al., “The UCLA Helical Permanent-Magnet Inverse Free Electron Laser”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS026, pp. 3055-3057.
[n] C. M. Bhat and F. Zimmermann, “LHC Luminosity Upgrade with Large Piwinski Angle Scheme: A Recent Look”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ032, pp. 1879-1881.
[n] E. Marin, A. Latina, J. Pfingstner, D. Schulte, and R. Tomas, “Tuning of CLIC-Final Focus System 3 TeV Baseline Design Under Static and Dynamic Imperfections”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 196-199. doi:10.18429/JACoW-IPAC2018-MOPMF043
[n] J. Cereijo Garc?â, T. Korhonen, and J. H. Lee, “Timing System at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 618-621. doi:10.18429/JACoW-ICALEPCS2017-TUPHA088
[n] A. A. Aksoy, ?û. Karsli, C. Kaya, O. Yavas, P. Arikan, and S. Ozkorucuklu, “The Turkish Accelerator and Radiation Laboratory in Ankara (TARLA) Project”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP089, pp. 585-588.
[n] K. V. Ettinger, O. J. Filkin, and B. J. Thomas, “Transmission Detectors for Cyclotron in-vivo Irradiations with Neutrons”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper F-14, pp. 467-470.
[n] B. Bonin, “Saclay Laboratory Report”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95A02, pp. 19-21.
[n] K. Anderson, C. M. Bhat, J. Marriner, and Z. Tang, “An Antiproton Target Design for Increased Beam Intensity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1946-1949.
[n] N. Elias, C. Darve, J. Fydrych, A. Nordt, and D. P. Piso, “Preliminary Functional Analysis and Operating Modes of ESS 704 MHz Superconducting Radio-Frequency Linac”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3317-3319. doi:10.18429/JACoW-IPAC2014-THPME042
[n] P. Jines and B. Craft, “PLC Based Upgrades for the CAMD Linac and Storage Ring Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP037, pp. XX-XX.
[n] J. Tan, B. Bonin, and H. Safa, “Thermal Contact Resistance of a Particle on a Substrate”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C02, pp. 369-372.
[n] L. E. Juergensen et al., “Installation of a Beam Loss Monitoring System at the S-DALINAC”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD24, pp. 468-470.
[n] E. Petit, “Progress of the SPIRAL2 Project”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEYA01, pp. 1912-1916.
[n] C. Clavero, D. Beringer, R. A. Lukaszew, W. M. Roach, R. Skuza, and C. E. Reece, “Strain Effects in the Superconducting Properties of Niobium Thin Films grown on Sapphire”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO047, pp. 835-837.
[n] Yu. A and N. Yu. Yazvitskii, “DESIGN AND TESTS OF A SUPERCONDUCTING MAGNET WITH A CRYOCOOLER FOR THE ION SOURCE DECRIS-SC”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUIP09, pp. XX-XX.
[n] D. Quartullo, S. C. P. Albright, and E. N. Shaposhnikova, “Studies of Longitudinal Beam Stability in CERN PS Booster After Upgrade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4469-4472. doi:10.18429/JACoW-IPAC2017-THPVA023
[n] V. A. Lebedev, S. Nagaitsev, J.-F. Ostiguy, A. V. Shemyakin, B. G. Shteynas, and N. Solyak, “PXIE Optics and Layout”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP057, pp. 3871-3873.
[n] W. Chou, M. A. Kostin, J. R. Lackey, R. J. Macek, Z. Tang, and P. S. Yoon, “Some Physics Issues of Carbon Stripping Foils”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS013, pp. 1679-1681.
[n] J. Maslow, J. Coleman, T. Kelehan, V. Rodriguez, and J. Koglin, “Modernization of DARHT axis-I debris blocker”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3428-3430. doi:10.18429/JACoW-IPAC2024-THPG67
[n] Y. K. Batygin, V. K. Bharadwaj, D. C. Schultz, and J. C. Sheppard, “Design Studies of Positron Collection for the NLC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH056, pp. 3804-3806.
[n] H. J. Kwon, K. H. Paek, K. J. Chung, C. Y. Kim, and K. H. Chung, “Klystron Power Supply for KOMAC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D017, pp. 118-120.
[n] L. Liu et al., “Preliminary Sirius Commissioning Results”, in Proc. IPAC'20, Caen, France, May 2020, pp. 11. doi:10.18429/JACoW-IPAC2020-MOVIR06
[n] C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2561-2564. doi:10.18429/JACoW-IPAC2016-WEPMY009
[n] D. Quartullo, E. N. Shaposhnikova, and H. Timko, “Controlled Longitudinal Emittance Blow-Up Using Band-Limited Phase Noise in CERN PSB”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4473-4476. doi:10.18429/JACoW-IPAC2017-THPVA024
[n] D. Mihalcea, P. Piot, B. M. Cowan, and P. Stoltz, “Wakefield Generation in Compact Rectangular Dielectric-Loaded Structures Using Flat Beams”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP132, pp. 340-342.
[n] H.-U. Klein, “Recent Developments in Hadron Therapy Accelerators”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper FOAB003, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Kuerzeder, M. Arnold, L. E. Juergensen, J. Pforr, N. Pietralla, and F. Hug, “Beam Break-up Measurements at the Recirculating Electron Accelerator S-DALINAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1714-1716.
- P. A. Zavodszky, “INNOVATI VE DESIGN PRINCIPLES OF SUSI ÔÇô SUPERCONDUCTING?SOURCE FOR IONS AT NSCL/MSU”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20B4, pp. XX-XX.
- A. J. Gonsalves et al., “Multi-GeV Plasma Acceleration Results at BELLA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1319-1324.
- G. Riddone et al., “Technical Specification for the CLIC Two-Beam Module”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP028, pp. 607-609.
- S. Bauer, M. Pekeler, W. Anders, J. Knobloch, and W.-D. M?Âller, “Vertical and Horizontal Test Results of TESLA Cavities for BESSY”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP13, pp. 267-267.
- B. L. Bures et al., “X-ray Pole Figure Analysis on Fiber Textured Epitaxial Niobium Films for SRF Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO080, pp. 418-421.
- M. Dach et al., “First Operational Experience with the Digital Beam Position Monitoring System for the Swiss Light Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A16, pp. 1809-1811.
- H. A. Day, M. J. Barnes, and L. M. C. Feliciano, “Impedance Studies of the LHC Injection Kicker Magnets for HL-LHC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 370-373.
- J. Bahrdt et al., “Measurements of the Lattice Modifications for the Cryogenic Undulator CPMU17”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4031-4034.
- G. I. Cancelo et al., “Analysis of DESY-FLASH LLRF Measurements for the ILC Heavy Beam Loading Test”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP077, pp. 2189-2191.
- A. Kosicek, P. Leban, and K. B. Scheidt, “Beam Lifetime Measurements with Libera Brilliance”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM063, pp. 311-314.
- Y. Alexahin, E. Gianfelice-Wendt, and W. L. Marsh, “Tune Evaluation from Phased BPM Turn-by-turn Data”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE084, pp. 1179-1181.
- E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
- E. Barbero et al., “Accuracy Of The LEP Spectrometer Beam Orbit Monitors”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM03, pp. XX-XX.
- H. G. Khodzhibagiyan et al., “Prototype Superconducting Magnets for the NICA Accelerator Complex”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME028, pp. 3567-3569.
- R. Tikhoplav et al., “The UCLA Helical Permanent-Magnet Inverse Free Electron Laser”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS026, pp. 3055-3057.
- C. M. Bhat and F. Zimmermann, “LHC Luminosity Upgrade with Large Piwinski Angle Scheme: A Recent Look”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPZ032, pp. 1879-1881.
- E. Marin, A. Latina, J. Pfingstner, D. Schulte, and R. Tomas, “Tuning of CLIC-Final Focus System 3 TeV Baseline Design Under Static and Dynamic Imperfections”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 196-199.
- J. Cereijo Garc?â, T. Korhonen, and J. H. Lee, “Timing System at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 618-621.
- A. A. Aksoy, ?û. Karsli, C. Kaya, O. Yavas, P. Arikan, and S. Ozkorucuklu, “The Turkish Accelerator and Radiation Laboratory in Ankara (TARLA) Project”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP089, pp. 585-588.
- K. V. Ettinger, O. J. Filkin, and B. J. Thomas, “Transmission Detectors for Cyclotron in-vivo Irradiations with Neutrons”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper F-14, pp. 467-470.
- B. Bonin, “Saclay Laboratory Report”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95A02, pp. 19-21.
- K. Anderson, C. M. Bhat, J. Marriner, and Z. Tang, “An Antiproton Target Design for Increased Beam Intensity”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1946-1949.
- N. Elias, C. Darve, J. Fydrych, A. Nordt, and D. P. Piso, “Preliminary Functional Analysis and Operating Modes of ESS 704 MHz Superconducting Radio-Frequency Linac”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3317-3319.
- P. Jines and B. Craft, “PLC Based Upgrades for the CAMD Linac and Storage Ring Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAP037, pp. XX-XX.
- J. Tan, B. Bonin, and H. Safa, “Thermal Contact Resistance of a Particle on a Substrate”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C02, pp. 369-372.
- L. E. Juergensen et al., “Installation of a Beam Loss Monitoring System at the S-DALINAC”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPD24, pp. 468-470.
- E. Petit, “Progress of the SPIRAL2 Project”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEYA01, pp. 1912-1916.
- C. Clavero, D. Beringer, R. A. Lukaszew, W. M. Roach, R. Skuza, and C. E. Reece, “Strain Effects in the Superconducting Properties of Niobium Thin Films grown on Sapphire”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO047, pp. 835-837.
- Yu. A and N. Yu. Yazvitskii, “DESIGN AND TESTS OF A SUPERCONDUCTING MAGNET WITH A CRYOCOOLER FOR THE ION SOURCE DECRIS-SC”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUIP09, pp. XX-XX.
- D. Quartullo, S. C. P. Albright, and E. N. Shaposhnikova, “Studies of Longitudinal Beam Stability in CERN PS Booster After Upgrade”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4469-4472.
- V. A. Lebedev, S. Nagaitsev, J.-F. Ostiguy, A. V. Shemyakin, B. G. Shteynas, and N. Solyak, “PXIE Optics and Layout”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP057, pp. 3871-3873.
- W. Chou, M. A. Kostin, J. R. Lackey, R. J. Macek, Z. Tang, and P. S. Yoon, “Some Physics Issues of Carbon Stripping Foils”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS013, pp. 1679-1681.
- J. Maslow, J. Coleman, T. Kelehan, V. Rodriguez, and J. Koglin, “Modernization of DARHT axis-I debris blocker”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG67, pp. 3428-3430.
- Y. K. Batygin, V. K. Bharadwaj, D. C. Schultz, and J. C. Sheppard, “Design Studies of Positron Collection for the NLC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH056, pp. 3804-3806.
- H. J. Kwon, K. H. Paek, K. J. Chung, C. Y. Kim, and K. H. Chung, “Klystron Power Supply for KOMAC”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D017, pp. 118-120.
- L. Liu et al., “Preliminary Sirius Commissioning Results”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 11.
- C. A. Lindstrom, E. Adli, J. Pfingstner, E. Marin, and D. Schulte, “Transverse Tolerances of a Multi-Stage Plasma Wakefield Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2561-2564.
- D. Quartullo, E. N. Shaposhnikova, and H. Timko, “Controlled Longitudinal Emittance Blow-Up Using Band-Limited Phase Noise in CERN PSB”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4473-4476.
- D. Mihalcea, P. Piot, B. M. Cowan, and P. Stoltz, “Wakefield Generation in Compact Rectangular Dielectric-Loaded Structures Using Flat Beams”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP132, pp. 340-342.
- H.-U. Klein, “Recent Developments in Hadron Therapy Accelerators”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAB003, unpublished.
Back to search