Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. W. Jones and J. D. Gilpatrick, “Looking Beyond LANSCE: The MaRIE Facility”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper MOKNB02, pp. 21-21.
[n] Y. Yin and Y. Y. Labs, “Beam Diagnostics with Optical Fiber Optics”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP049, pp. 3040-3042.
[n] E. Salehi, M. Fujimoto, L. Guo, M. Katoh, and Y. Taira, “Lattice Design of the UVSOR_{I}V Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2205-2208. doi:10.18429/JACoW-IPAC2022-WEPOTK061
[n] H. Cortey, “The Laser MegaJoule Facility Status Report”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 989-993. doi:10.18429/JACoW-ICALEPCS2021-FRAL01
[n] A. Beuret and P. Proudlock, “Regulation of Geographically Separated Master / Slave Power Converters Without External Communication”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1194-1197.
[n] S. K?â, R. Andersson, E. Bargall?â, A. Nordt, and M. Rejzek, “Applying the Functional System Interaction Process at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 649-654. doi:10.18429/JACoW-ICALEPCS2017-TUPHA101
[n] O. N. Borisov et al., “New Beam Extraction System for the AIC-144 Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper G-22, pp. 528-531.
[n] N. V. Mokhov, A. Drozhdin, D. Macina, and I. L. Rakhno, “Accelerator Related Backgrounds in the LHC Forward Detectors”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB063, pp. 1742-1744.
[n] C. Yao, Y.-C. Chae, N. Sereno, and B. X. Yang, “Investigation of APS PAR Vertical Beam Instability”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP035, pp. 2393-2395.
[n] R. Bossart, H. H. Braun, M. Chanudet-Cayla, G. Guignard, J. A. Riche, and M. Valentini, “Simulation of the CTF Drive Beam Line and Comparison with the Experiment”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B16, pp. 1393-1395.
[n] C. Benvenuti, “Superconducting Coatings for Accelerating RF Cavities: Past, Present, Future”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91C04, pp. XX-XX.
[n] M. Tischer et al., “Magnetic Tuning and Installation Modifications of U48 Undulator for the Delhi Light Source (DLS)”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2918-2920. doi:10.18429/JACoW-IPAC2021-WEPAB131
[n] E. Bondarchuk et al., “Normal Conducting QN Quadrupole for the HERA Luminosity Upgrade”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP48C, pp. 1957-1959.
[n] H. Joehri, C. Hess, L. Nue, L. Patthey, and T. Schmitt, “Development of the RIXS Manipulator”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 35-37. doi:10.18429/JACoW-MEDSI2016-MOPE16
[n] R. W. Goodwin and M. F. Shea, “The Distributed Control System for the Fermilab 200 MeV Linac”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H07, pp. 277-280.
[n] X. X. Li, “RF Design and Cold Test of SCDTL Structure for Proton Therapy”, presented at the SAP'23, Xichang, China, Jul. 2023, paper TUPB037, unpublished.
[n] J. Knott, “Measurement of the Instaneous 200 MHz Bunch Currents at 750 keV for the CERN Linac 2”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2244-2247.
[n] W. A. Barletta, “Electron Accelerators with Pulsed Power Drives”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 186-191.
[n] G. R. Swain and A. A. Browman, “Proposed Bunching Scheme for a Polarized H - Injector”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3024-3027.
[n] X. Wang et al., “Physical design for Shenzhen superconducting soft X-Ray free-electron laser (S3FEL)”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1852-1855. doi:10.18429/JACoW-IPAC2023-TUPL043
[n] A. Cianchi et al., “Novel Development on Superconducting Niobium Film Deposition for RF Applications”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH168, pp. 457-459.
[n] S. W. Mosko and N. F. Ziegler, “Improvements in the ORIC RF System”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 201-205.
[n] F.-T. Chung et al., “Development of a Break Out Box System for the 1.5Ghz SRF Harmonic Cavity at NSRRC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB036, unpublished.
[n] C. Yao and Y.-C. Chae, “Electron Multipacting Observation and Simulation in the APS PAR”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS112, pp. 3541-3543.
[n] Yu. Ts. Oganessian et al., “PROJECT OF THE U400R CYCLOTRON AT THE FLNR JINR”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WENO04, pp. XX-XX.
[n] W.-R. Liao et al., “Design and installation of the liquid nitrogen transfer line for TPS 15A beamline endstation”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPS15, unpublished.
[n] G. Hutter et al., “The 101 MHz Amplifier System of the New CERN Lead Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P021, pp. 3123-3125.
[n] C. H. Boulware, T. L. Grimm, R. Hipple, S. M. Lund, and V. S. Morozov, “Double-Bend Achromat Beamline for Injection Into a High-Power Superconducting Electron Linac”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 494-496. doi:10.18429/JACoW-NAPAC2019-TUPLH03
[n] L. Calabretta et al., “Proposal for High Power Cyclotrons Test Site in Catania”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT028, pp. 378-380.
[n] R. Santiago Kern et al., “Completion of Testing Series Double-spoke Cavity Cryomodules for ESS”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 932-939. doi:10.18429/JACoW-SRF2023-THIAA03
[n] M. Broseta, A. Burgos, G. Cuni, D. Fernandez-Carreiras, D. Roldan, and S. Rubio-Manrique, “A Web-Based Report Tool for Tango Control Systems via Websockets”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 826-829. doi:10.18429/JACoW-ICALEPCS2017-TUPHA173
[n] D. Li et al., “Experimental Simulation of Ground Motion Effects”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 420-423.
[n] J. Forsberg, V. H. Hardion, and D. P. Spruce, “A Graphical Tool for Viewing and Interacting with a Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 681-684. doi:10.18429/JACoW-ICALEPCS2015-WEM309
[n] R. C. McCrady, J. D. Gilpatrick, and H. A. Watkins, “Beam Position and Phase Monitors for the LANSCE Linac”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG016, pp. 59-61.
[n] E. Blomley, A.-S. Mueller, and M. Schedler, “Beam Studies with a New Longitudinal Feedback System at the ANKA Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2658-2660. doi:10.18429/JACoW-IPAC2016-WEPOR001
For LaTeX
Use Complete Form
For BibTeX
References
- K. W. Jones and J. D. Gilpatrick, “Looking Beyond LANSCE: The MaRIE Facility”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper MOKNB02, pp. 21-21.
- Y. Yin and Y. Y. Labs, “Beam Diagnostics with Optical Fiber Optics”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP049, pp. 3040-3042.
- E. Salehi, M. Fujimoto, L. Guo, M. Katoh, and Y. Taira, “Lattice Design of the UVSOR_{I}V Storage Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2205-2208.
- H. Cortey, “The Laser MegaJoule Facility Status Report”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 989-993.
- A. Beuret and P. Proudlock, “Regulation of Geographically Separated Master / Slave Power Converters Without External Communication”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1194-1197.
- S. K?â, R. Andersson, E. Bargall?â, A. Nordt, and M. Rejzek, “Applying the Functional System Interaction Process at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 649-654.
- O. N. Borisov et al., “New Beam Extraction System for the AIC-144 Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper G-22, pp. 528-531.
- N. V. Mokhov, A. Drozhdin, D. Macina, and I. L. Rakhno, “Accelerator Related Backgrounds in the LHC Forward Detectors”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB063, pp. 1742-1744.
- C. Yao, Y.-C. Chae, N. Sereno, and B. X. Yang, “Investigation of APS PAR Vertical Beam Instability”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP035, pp. 2393-2395.
- R. Bossart, H. H. Braun, M. Chanudet-Cayla, G. Guignard, J. A. Riche, and M. Valentini, “Simulation of the CTF Drive Beam Line and Comparison with the Experiment”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6B16, pp. 1393-1395.
- C. Benvenuti, “Superconducting Coatings for Accelerating RF Cavities: Past, Present, Future”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91C04, pp. XX-XX.
- M. Tischer et al., “Magnetic Tuning and Installation Modifications of U48 Undulator for the Delhi Light Source (DLS)”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2918-2920.
- E. Bondarchuk et al., “Normal Conducting QN Quadrupole for the HERA Luminosity Upgrade”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP48C, pp. 1957-1959.
- H. Joehri, C. Hess, L. Nue, L. Patthey, and T. Schmitt, “Development of the RIXS Manipulator”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 35-37.
- R. W. Goodwin and M. F. Shea, “The Distributed Control System for the Fermilab 200 MeV Linac”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H07, pp. 277-280.
- X. X. Li, “RF Design and Cold Test of SCDTL Structure for Proton Therapy”, presented at the 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, paper TUPB037, unpublished.
- J. Knott, “Measurement of the Instaneous 200 MHz Bunch Currents at 750 keV for the CERN Linac 2”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2244-2247.
- W. A. Barletta, “Electron Accelerators with Pulsed Power Drives”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 186-191.
- G. R. Swain and A. A. Browman, “Proposed Bunching Scheme for a Polarized H - Injector”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3024-3027.
- X. Wang et al., “Physical design for Shenzhen superconducting soft X-Ray free-electron laser (S3FEL)”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL043, pp. 1852-1855.
- A. Cianchi et al., “Novel Development on Superconducting Niobium Film Deposition for RF Applications”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH168, pp. 457-459.
- S. W. Mosko and N. F. Ziegler, “Improvements in the ORIC RF System”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 201-205.
- F.-T. Chung et al., “Development of a Break Out Box System for the 1.5Ghz SRF Harmonic Cavity at NSRRC”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB036, this conference.
- C. Yao and Y.-C. Chae, “Electron Multipacting Observation and Simulation in the APS PAR”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS112, pp. 3541-3543.
- Yu. Ts. Oganessian et al., “PROJECT OF THE U400R CYCLOTRON AT THE FLNR JINR”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WENO04, pp. XX-XX.
- W.-R. Liao et al., “Design and installation of the liquid nitrogen transfer line for TPS 15A beamline endstation”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS15, unpublished.
- G. Hutter et al., “The 101 MHz Amplifier System of the New CERN Lead Injector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P021, pp. 3123-3125.
- C. H. Boulware, T. L. Grimm, R. Hipple, S. M. Lund, and V. S. Morozov, “Double-Bend Achromat Beamline for Injection Into a High-Power Superconducting Electron Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 494-496.
- L. Calabretta et al., “Proposal for High Power Cyclotrons Test Site in Catania”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT028, pp. 378-380.
- R. Santiago Kern et al., “Completion of Testing Series Double-spoke Cavity Cryomodules for ESS”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper THIAA03, pp. 932-939.
- M. Broseta, A. Burgos, G. Cuni, D. Fernandez-Carreiras, D. Roldan, and S. Rubio-Manrique, “A Web-Based Report Tool for Tango Control Systems via Websockets”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 826-829.
- D. Li et al., “Experimental Simulation of Ground Motion Effects”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 420-423.
- J. Forsberg, V. H. Hardion, and D. P. Spruce, “A Graphical Tool for Viewing and Interacting with a Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 681-684.
- R. C. McCrady, J. D. Gilpatrick, and H. A. Watkins, “Beam Position and Phase Monitors for the LANSCE Linac”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG016, pp. 59-61.
- E. Blomley, A.-S. Mueller, and M. Schedler, “Beam Studies with a New Longitudinal Feedback System at the ANKA Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2658-2660.
Back to search