JaCoW Logo

Reference Search

Favourites


For Word

[n]	G. Seidel, “Operation of the High Intensity Proton Beam Facility at PSI”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGD01, pp. 329-332. 
[n]	F. Antoniou et al., “Transverse Emittance Studies at Extraction of the CERN PS Booster”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1058-1061. doi:10.18429/JACoW-IPAC2019-MOPTS087
[n]	J. Nowak, V. Davidson, L. Genova, R. Johnson, and D. Reagan, “A Pulse to Pulse Klystron Diagnosis System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3097-3099. 
[n]	P. Grand and A. N. Goland, “On the Needs and Status of CTR Materials Irradiation Facilities, an Introduction to 14-MeV Neutron Sources”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper C05, pp. 132-137. 
[n]	F. Zhu et al., “Measurements on Particle Contamination During Cavity Assembly”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP52, pp. 466-469. 
[n]	M. Pereira, M. Lamont, G. J. M??ller, D. D. Teixeira, T. E. Lahey, and E. S. M. McCrory, “LHC Supertable”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN002, pp. 86-89. 
[n]	C. Reece, “A 100 MV Cryomodule for CW Operation”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOA04, pp. 97-97. 
[n]	J. Borburgh, M. Hourican, and M. Thivent, “A New Set of Magnetic Septa in the CERN PS Complex”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP11, pp. 2283-2285. 
[n]	S. Rubio-Manrique, G. Cuni, D. Fernandez-Carreiras, Z. Reszela, and A. Rubio, “PyPLC, a Versatile PLC-to-PC Python Interface”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO011, pp. 179-181. 
[n]	P. Craievich et al., “A Low-Energy RF Deflector for the FERMI@Elettra Project”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB43, pp. 493-496. 
[n]	F. Ameil, C. Betz, G. Cuk, and I. Verstovsek, “The General Interlock System (GIS) for FAIR”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 374-377. doi:10.18429/JACoW-ICALEPCS2015-MOPGF125
[n]	J. L. Conradie et al., “New Developments at iThemba LABS”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 274-277. doi:10.18429/JACoW-Cyclotrons2016-THA02
[n]	L. Y. Zhao, D. K. Liu, and C. X. Yin, “The SSRF Timing System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC162, pp. 3369-3371. 
[n]	K. Fl?Âttmann, “Design and Performance of Printed Circuit Steering Magnets for the FLASH Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB003, pp. 277-279. 
[n]	S. Kwon, J. Davis, M. T. Lynch, M. S. Prokop, S. Ruggles, and P. A. Torrez, “Gain Scheduled Neural Network Tuned PI Feedback Control System for the LANSCE Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS022, pp. 2379-2381. 
[n]	D. Jeon, K. Crandall, J. Stovall, and H. Takeda, “Impact of Cavity RF Field Phase and Amplitude Control Uncertainties on the SNS Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB059, pp. 2855-2856. 
[n]	T. Ebeling et al., “Processing of TTF Cavities at DESY”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP07, pp. 293-296. 
[n]	R. H. Helm, J. E. Clendenin, S. D. Ecklund, A. V. Kulikov, and R. Pitthan, “Isochronous 180[degree] Turns for the SLC Positron System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 500-503. 
[n]	F. Hoguin and S. Deghaye, “Solving the Synchronization Problem in Multi-Core Embedded Real-Time Systems”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 942-946. doi:10.18429/JACoW-ICALEPCS2015-WEPGF102
[n]	J. Heim et al., “Wiggler Insertion of the PEP-II B-Factory LER”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA03, pp. 527-529. 
[n]	J. H. Lee, J. H. Han, J. H. Hong, C. H. Kim, I. S. Ko, and S. J. Lee, “Laser Heater System Test at PAL-XFEL ITF”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3048-3050. doi:10.18429/JACoW-IPAC2016-WEPOY028
[n]	E. Vogel et al., “SRF Gun Development at DESY”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 105-108. doi:10.18429/JACoW-LINAC2018-MOPO037
[n]	S. Rubio-Manrique, M. Broseta, G. Cuni, D. Fernandez-Carreiras, A. Rubio, and J. Villanueva, “Integration of PLC's in Tango Control Systems Using PyPLC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 413-416. doi:10.18429/JACoW-ICALEPCS2015-MOPGF140

For LaTeX

Use Complete Form

For BibTeX

References

Back to search