Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. D. Liu, Z. Y. Guo, Q. Qin, J. Q. Wang, and J. Xing, “Simulation of the Electron Cloud Instability for BEPCII”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15007, pp. XX-XX.
[n] L. J. Chen et al., “Realization of a System to Monitor Water Quality and for Cooling a TPS KEKB Superconducting Cavity CPL/HOM”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3740-3742. doi:10.18429/JACoW-IPAC2016-THPMY037
[n] P. Adamson, “700 kW Main Injector Operations for NOvA at FNAL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1286-1290. doi:10.18429/JACoW-IPAC2015-TUXB3
[n] Y. G. Song et al., “Development of a Machine Protection System for KOMAC Facility”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 334-336. doi:10.18429/JACoW-ICALEPCS2017-TUMPA02
[n] J. Liu et al., “Design of the Beam Profile Monitors for THz Source Based FEL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3584-3586. doi:10.18429/JACoW-IPAC2014-THPME142
[n] T. Bohl, T. P. R. Linnecar, and E. Shaposhnikova, “The Fine Structure of the Longitudinal Machine Impedance Observed with Single Bunches”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6PC004, pp. XX-XX.
[n] T. Hiromasa et al., “Horizontal-Vertical Coupling for Three Dimensional Laser Cooling”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD071, pp. 855-857.
[n] X. L. Jiang, K. F. Chen, S. C. Jiang, and Y. B. Piao, “Neutralization and Focusing of Pulsed Beams with High Current Densities”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1814-1817.
[n] M. Heilmann et al., “RF Commissioning of the First-of-Series Cavity Section of the Alvarez 2.0 at GSI”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 106-109. doi:10.18429/JACoW-LINAC2022-MOPOPA17
[n] T. Thuillier, “The never ending story of ECR Ion Sources”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper WET1AUK02, unpublished.
[n] I. Balossino et al., “Strain measurements of the Apple-X SABINA undulator with fiber Bragg grating”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3777-3780. doi:10.18429/JACoW-IPAC2024-THPS21
[n] T. P. R. Linnecar, “The High Frequency Longitudinal and Transverse Pick-Ups in the CERN SPS Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3409-3412.
[n] G. Travish, S. Boucher, J. B. Rosenzweig, J. Xu, and R. B. Yoder, “Simulation of and Progress towards a Micron-scale Laser-powered Dielectric Electron Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP142, pp. 2827-2829.
[n] E. N. Shaposhnikova, T. Bohl, and T. P. R. Linnecar, “Beam Transfer Functions and Beam Stabilisation in a Double RF System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP033, pp. 2300-2302.
[n] M. Schuh, F. Gerigk, J. Tuckmantel, and C. P. Welsch, “Higher Order Mode Beam Breakup Limits in the Superconducting Cavities of the SPL”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO100, pp. 871-875.
[n] T. Thuillier, “Closing Remarks for ECRIS'14”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper THOBMH01, pp. 144-145.
[n] C. Compton et al., “Superconducting Resonator Production for Ion Linac at Michigan State University”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO055, pp. 226-228.
[n] D. Gavela, I. Podadera, and F. Toral, “Calculation and Design of the Re-buncher Cavities for the LIPAc Deuteron Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3881-3883. doi:10.18429/JACoW-IPAC2014-THPRI050
[n] J. J. Keir, P. R. Harmer, D. Lang, R. E. Laxdal, T. Shishido, and R. Smith, “Vertical Electro-Polishing at TRIUMF”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB096, pp. 378-380.
[n] J. A. Fugitt, F. K. Crosby, and M. L. Nolan, “Low-Cost Megawatt RF Power Sources for Linear Accelerators to 70 MHz and Above”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H10, pp. 287-289.
[n] F.-Y. Chang et al., “Tuner loop based on FPGA for Petra cavity at TPS booster ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4216-4218. doi:10.18429/JACoW-IPAC2023-THPA108
[n] R. W. Klaffky, R. M. Lindstrom, B. Maranville, B. J. Micklich, R. Shull, and J. H. Vacca, “Thermal Neutron Demagnetization of NdFeB Magnets”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS130, pp. 3589-3591.
[n] L. Catani et al., “Cathodic Arc Grown Niobium Films for RF Superconducting Cavity Applications”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP62, pp. 385-387.
[n] Z. Yin, “PRELIMINARY DESIGN OF SUPERCONDUCTING MAGNETS FOR BEPC-II”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP068, pp. XX-XX.
[n] M. Tzoufras et al., “The Physical Picture of Beam Loading in the Blowout Regime”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS028, pp. 3061-3063.
[n] I. Y. Kim et al., “Development of the Transverse Beam Profile Monitors for the PAL-XFEL”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD16, pp. 452-454.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. D. Liu, Z. Y. Guo, Q. Qin, J. Q. Wang, and J. Xing, “Simulation of the Electron Cloud Instability for BEPCII”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP15007, pp. XX-XX.
- L. J. Chen et al., “Realization of a System to Monitor Water Quality and for Cooling a TPS KEKB Superconducting Cavity CPL/HOM”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3740-3742.
- P. Adamson, “700 kW Main Injector Operations for NOvA at FNAL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1286-1290.
- Y. G. Song et al., “Development of a Machine Protection System for KOMAC Facility”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 334-336.
- J. Liu et al., “Design of the Beam Profile Monitors for THz Source Based FEL”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3584-3586.
- T. Bohl, T. P. R. Linnecar, and E. Shaposhnikova, “The Fine Structure of the Longitudinal Machine Impedance Observed with Single Bunches”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6PC004, pp. XX-XX.
- T. Hiromasa et al., “Horizontal-Vertical Coupling for Three Dimensional Laser Cooling”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD071, pp. 855-857.
- X. L. Jiang, K. F. Chen, S. C. Jiang, and Y. B. Piao, “Neutralization and Focusing of Pulsed Beams with High Current Densities”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1814-1817.
- M. Heilmann et al., “RF Commissioning of the First-of-Series Cavity Section of the Alvarez 2.0 at GSI”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 106-109.
- T. Thuillier, “The never ending story of ECR Ion Sources”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper WET1AUK02, unpublished.
- I. Balossino et al., “Strain measurements of the Apple-X SABINA undulator with fiber Bragg grating”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS21, pp. 3777-3780.
- T. P. R. Linnecar, “The High Frequency Longitudinal and Transverse Pick-Ups in the CERN SPS Accelerator”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3409-3412.
- G. Travish, S. Boucher, J. B. Rosenzweig, J. Xu, and R. B. Yoder, “Simulation of and Progress towards a Micron-scale Laser-powered Dielectric Electron Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP142, pp. 2827-2829.
- E. N. Shaposhnikova, T. Bohl, and T. P. R. Linnecar, “Beam Transfer Functions and Beam Stabilisation in a Double RF System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP033, pp. 2300-2302.
- M. Schuh, F. Gerigk, J. Tuckmantel, and C. P. Welsch, “Higher Order Mode Beam Breakup Limits in the Superconducting Cavities of the SPL”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO100, pp. 871-875.
- T. Thuillier, “Closing Remarks for ECRIS'14”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper THOBMH01, pp. 144-145.
- C. Compton et al., “Superconducting Resonator Production for Ion Linac at Michigan State University”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO055, pp. 226-228.
- D. Gavela, I. Podadera, and F. Toral, “Calculation and Design of the Re-buncher Cavities for the LIPAc Deuteron Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3881-3883.
- J. J. Keir, P. R. Harmer, D. Lang, R. E. Laxdal, T. Shishido, and R. Smith, “Vertical Electro-Polishing at TRIUMF”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB096, pp. 378-380.
- J. A. Fugitt, F. K. Crosby, and M. L. Nolan, “Low-Cost Megawatt RF Power Sources for Linear Accelerators to 70 MHz and Above”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H10, pp. 287-289.
- F.-Y. Chang et al., “Tuner loop based on FPGA for Petra cavity at TPS booster ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA108, pp. 4216-4218.
- R. W. Klaffky, R. M. Lindstrom, B. Maranville, B. J. Micklich, R. Shull, and J. H. Vacca, “Thermal Neutron Demagnetization of NdFeB Magnets”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS130, pp. 3589-3591.
- L. Catani et al., “Cathodic Arc Grown Niobium Films for RF Superconducting Cavity Applications”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP62, pp. 385-387.
- Z. Yin, “PRELIMINARY DESIGN OF SUPERCONDUCTING MAGNETS FOR BEPC-II”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP068, pp. XX-XX.
- M. Tzoufras et al., “The Physical Picture of Beam Loading in the Blowout Regime”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS028, pp. 3061-3063.
- I. Y. Kim et al., “Development of the Transverse Beam Profile Monitors for the PAL-XFEL”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPD16, pp. 452-454.
Back to search