Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Hähnel, G. Dollinger, J. Sonpar, M. Mayerhofer, and R. Helm, “A novel test cavity setup for surface conductivity measurements of additive manufacturing samples”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 363-366. doi:10.18429/JACoW-LINAC2024-TUPB019
[n] R. J. Nawrocky, R. F. Frankel, and M. G. Thomas, “Magnet Power Supply for ISABELLE”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4075-4078.
[n] R. J. Nawrocky, J. Galayda, D. M. Shu, and L. H. Yu, “A Beam Profile Monitor for the NSLS VUV Ring Employing Linear Photodiode Arrays”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1893-1896.
[n] M. Rabasa et al., “CFD studies and experimental validation of the convective heat transfer coefficient in non-fully developed flows applied to conventional geometries used in particle accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4912-4915. doi:10.18429/JACoW-IPAC2023-THPM010
[n] N. Milleron, “Some Recent Developments in Vacuum Techniques for Acclerators and Storage Rings”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 794-804.
[n] I. Frolov, A. Silin, and A. I. Vaguine, “A New Approach in Development of Data Flow Control and Investigation System for Computer Networks”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 329-332. doi:10.18429/JACoW-ICALEPCS1991-S08NC11
[n] H. Kugler, S. Battisti, D. Brandt, J. P. Potier, and A. Verdier, “Closed Orbit Distortions and Their Corrections in the 600 MeV Electron-Positron Accumulator at LEP”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 758-761.
[n] M. Neubauer, J. Wessel, M. Popovic, R. Lentz, T. Blassick, and T. Wynn, “An input port for a high-power magnetron”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR31, unpublished.
[n] E. Wang et al., “DBR-SL-GaAs surface charge limit observation and suppressing for EIC high charge polarized source”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC45, unpublished.
[n] H. Halama, “Ion Clearing and Photoelectron Production in the 200 MeV SXLS ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2313-2316.
[n] D. Reistad, B. G?Ñlnander, K. Rathsman, and A. O. Sidorin, “Calculations on High-energy Electron Cooling in the HESR”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper MOA2C05, pp. 44-48.
[n] T. Schmidt et al., “Magnetic Design of an Apple III Undulator for SwissFEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP043, pp. 116-120.
[n] I. Chaikovska et al., “Experimental Activities on High Intensity Positron Sources Using Channeling”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2910-2913. doi:10.18429/JACoW-IPAC2017-WEPIK002
[n] A. I. Ageev et al., “The IHEP Accelerating and Storage Complex - Status and Development”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 233-237.
[n] G. R. White et al., “The EPICS Software Framework Moves from Controls to Physics”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1216-1218. doi:10.18429/JACoW-IPAC2019-TUZZPLM3
[n] F. Bakkali Taheri et al., “Spectra of Coherent Smith-Purcell Radiation Observed from Short Electron Bunches: Numerical and Experimental Studies”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA056, pp. 801-803.
[n] I. Jirousek et al., “The Concept of the PROSCAN Patient Safety System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH215, pp. XX-XX.
[n] N. Steinhau-K??hl et al., “Basic Studies for the Electro Polishing Facility at DESY”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ003, pp. XX-XX.
[n] G. Penco et al., “Beam Optics Measurements at FERMI by using Wire-Scanner”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 101-104. doi:10.18429/JACoW-FEL2015-MOP034
[n] M. Okamura, “Laser-Based Heavy Ion Production”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TU2002, pp. 219-221.
[n] A. K. Orduz et al., “Beam Commissioning SPIRAL2”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2540-2543. doi:10.18429/JACoW-IPAC2021-WEXB05
[n] J. K. Bair et al., “Design Considerations for the ORNL 25 MV Tandem Accelerator”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1655-1659.
[n] M. Martini, M. Aiba, and C. Carli, “Evolution Beam Parameters During Injection and Storage of the High Brightness Beams Envisaged for the Linac4 Injection into the CERN PS Booster”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA25, pp. 134-136.
[n] S. J. Bean et al., “A New Traveling Interferometric Scheme for the APS Upgrade of the 2-ID Bionanoprobe”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 345. doi:10.18429/JACoW-MEDSI2020-THOA02
[n] R. Damm, A. Otis, and V. LoGrasso, “Quadrupole Focusing System for the 200 MeV Linac”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper F-7, pp. 561-577.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Hähnel, G. Dollinger, J. Sonpar, M. Mayerhofer, and R. Helm, “A novel test cavity setup for surface conductivity measurements of additive manufacturing samples”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 363-366.
- R. J. Nawrocky, R. F. Frankel, and M. G. Thomas, “Magnet Power Supply for ISABELLE”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4075-4078.
- R. J. Nawrocky, J. Galayda, D. M. Shu, and L. H. Yu, “A Beam Profile Monitor for the NSLS VUV Ring Employing Linear Photodiode Arrays”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1893-1896.
- M. Rabasa et al., “CFD studies and experimental validation of the convective heat transfer coefficient in non-fully developed flows applied to conventional geometries used in particle accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM010, pp. 4912-4915.
- N. Milleron, “Some Recent Developments in Vacuum Techniques for Acclerators and Storage Rings”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 794-804.
- I. Frolov, A. Silin, and A. I. Vaguine, “A New Approach in Development of Data Flow Control and Investigation System for Computer Networks”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S08NC11, pp. 329-332.
- H. Kugler, S. Battisti, D. Brandt, J. P. Potier, and A. Verdier, “Closed Orbit Distortions and Their Corrections in the 600 MeV Electron-Positron Accumulator at LEP”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 758-761.
- M. Neubauer, J. Wessel, M. Popovic, R. Lentz, T. Blassick, and T. Wynn, “An input port for a high-power magnetron”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR31, unpublished.
- E. Wang et al., “DBR-SL-GaAs surface charge limit observation and suppressing for EIC high charge polarized source”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC45, unpublished.
- H. Halama, “Ion Clearing and Photoelectron Production in the 200 MeV SXLS ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2313-2316.
- D. Reistad, B. G?Ñlnander, K. Rathsman, and A. O. Sidorin, “Calculations on High-energy Electron Cooling in the HESR”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper MOA2C05, pp. 44-48.
- T. Schmidt et al., “Magnetic Design of an Apple III Undulator for SwissFEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP043, pp. 116-120.
- I. Chaikovska et al., “Experimental Activities on High Intensity Positron Sources Using Channeling”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2910-2913.
- A. I. Ageev et al., “The IHEP Accelerating and Storage Complex - Status and Development”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 233-237.
- G. R. White et al., “The EPICS Software Framework Moves from Controls to Physics”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1216-1218.
- F. Bakkali Taheri et al., “Spectra of Coherent Smith-Purcell Radiation Observed from Short Electron Bunches: Numerical and Experimental Studies”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA056, pp. 801-803.
- I. Jirousek et al., “The Concept of the PROSCAN Patient Safety System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TH215, pp. XX-XX.
- N. Steinhau-K??hl et al., “Basic Studies for the Electro Polishing Facility at DESY”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PZ003, pp. XX-XX.
- G. Penco et al., “Beam Optics Measurements at FERMI by using Wire-Scanner”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 101-104.
- M. Okamura, “Laser-Based Heavy Ion Production”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TU2002, pp. 219-221.
- A. K. Orduz et al., “Beam Commissioning SPIRAL2”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2540-2543.
- J. K. Bair et al., “Design Considerations for the ORNL 25 MV Tandem Accelerator”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1655-1659.
- M. Martini, M. Aiba, and C. Carli, “Evolution Beam Parameters During Injection and Storage of the High Brightness Beams Envisaged for the Linac4 Injection into the CERN PS Booster”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA25, pp. 134-136.
- S. J. Bean et al., “A New Traveling Interferometric Scheme for the APS Upgrade of the 2-ID Bionanoprobe”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 345.
- R. Damm, A. Otis, and V. LoGrasso, “Quadrupole Focusing System for the 200 MeV Linac”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper F-7, pp. 561-577.
Back to search