Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. V. Avrakhov, A. Kanareykin, R. A. Kostin, N. Solyak, and V. P. Yakovlev, “Studies of the Superconducting Traveling Wave Cavity for High Gradient Linac”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC14, pp. 820-822.
[n] G. Berden et al., “Electro-optic Techniques for Longitudinal Electron Bunch Diagnostics”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH076, pp. 413-416.
[n] N. Okuda and K. Yokoya, “Impedance Estimation by Parabolic Partial Differential Equation for Rectangular Taper”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper MO3IODN01, pp. 27-29.
[n] S. Tsujino et al., “Development of All-metal Stacked-double Gate Field Emitter Array Cathodes for X-ray Free-electron Laser Applications”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP041, pp. 811-814.
[n] H. Bartosik, A. Oeftiger, M. Schenk, F. Schmidt, and M. Titze, “Improved Methods for the Measurement and Simulation of the CERN SPS Non-linear Optics”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3464-3467. doi:10.18429/JACoW-IPAC2016-THPMR036
[n] T. Henderson et al., “Design of the PEP-II Low-Energy Ring Arc Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP01, pp. 1322-1324.
[n] J. Randhahn et al., “Design and Operation of a Ferrite Loaded Kicker Cavity for the Longitudinal Coupled Bunch Feedback for HERA-p”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH087, pp. 2991-2993.
[n] L. G. Zhang, K. Fan, S. Hu, Z. Y. Mei, and Z. J. Zeng, “Design of the Trim Coil for the Superconducting Cyclotron Extraction”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2840-2842. doi:10.18429/JACoW-IPAC2018-WEPML064
[n] H. Piekarz, S. Hays, Y. Huang, and V. D. Shiltsev, “Design Considerations of Fast-cycling Synchrotrons Based on Superconducting Transmission Line Magnets”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC101, pp. 301-303.
[n] F. Matichard, “System and Subsystem Engineering of Long Baseline Detectors”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper TUIO01, pp. XX-XX.
[n] O. Mete Apsimon et al., “Design Study for a Plasma Undulator Experiment Using Capillary Based Discharge Plasma Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1584-1587. doi:10.18429/JACoW-IPAC2017-TUPAB114
[n] G. Mavrogenes, G. Clifft, K. Johnson, W. Ramler, and W. Wesolowski, “Subnanosecond High-Intensity Beam Pulse”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 919-923.
[n] T. C. Thayer, N. Balakrishnan, M. A. Montironi, and A. Ratti, “Deployment and Operation of the Remotely Operated Accelerator Monitor (ROAM) Robot”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1077-1082. doi:10.18429/JACoW-ICALEPCS2023-WE3AO06
[n] B. Lindstrom et al., “High Luminosity LHC collimation system performance for different optics configurations”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 663-666. doi:10.18429/JACoW-IPAC2025-MOPS029
[n] P. Sprangle and A. Ting, “Gain of an FEL with an Unmatched Electron Beam”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 209-212.
[n] H. L. Andrews, C. A. Brau, and J. D. Jarvis, “Three-Dimensional Theory for a Smith-Purcell Free-Electron Laser with Grating Sidewalls”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH005, pp. 17-20.
[n] J. T. M. Lyles et al., “New RF System for First Drift Tube Linac Cavity at LANSCE”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 703-706. doi:10.18429/JACoW-NAPAC2019-WEPLM49
[n] T. Dehaeze, J. Bonnefoy, and G. R. L. Collette, “Mechatronics Approach for the Development of a Nano-Active-Stabilization-System”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 93. doi:10.18429/JACoW-MEDSI2020-TUIO02
[n] V. A. Lebedev, “Antiproton Production and Accumulation”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper MOA2I04, pp. 39-43.
[n] T. L. He et al., “Bunch Lengthening of the HALF Storage Ring in the Presence of Passive Harmonic Cavities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2082-2085. doi:10.18429/JACoW-IPAC2021-TUPAB265
For LaTeX
Use Complete Form
For BibTeX
References
- P. V. Avrakhov, A. Kanareykin, R. A. Kostin, N. Solyak, and V. P. Yakovlev, “Studies of the Superconducting Traveling Wave Cavity for High Gradient Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC14, pp. 820-822.
- G. Berden et al., “Electro-optic Techniques for Longitudinal Electron Bunch Diagnostics”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH076, pp. 413-416.
- N. Okuda and K. Yokoya, “Impedance Estimation by Parabolic Partial Differential Equation for Rectangular Taper”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper MO3IODN01, pp. 27-29.
- S. Tsujino et al., “Development of All-metal Stacked-double Gate Field Emitter Array Cathodes for X-ray Free-electron Laser Applications”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP041, pp. 811-814.
- H. Bartosik, A. Oeftiger, M. Schenk, F. Schmidt, and M. Titze, “Improved Methods for the Measurement and Simulation of the CERN SPS Non-linear Optics”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3464-3467.
- T. Henderson et al., “Design of the PEP-II Low-Energy Ring Arc Magnets”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAP01, pp. 1322-1324.
- J. Randhahn et al., “Design and Operation of a Ferrite Loaded Kicker Cavity for the Longitudinal Coupled Bunch Feedback for HERA-p”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH087, pp. 2991-2993.
- L. G. Zhang, K. Fan, S. Hu, Z. Y. Mei, and Z. J. Zeng, “Design of the Trim Coil for the Superconducting Cyclotron Extraction”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2840-2842.
- H. Piekarz, S. Hays, Y. Huang, and V. D. Shiltsev, “Design Considerations of Fast-cycling Synchrotrons Based on Superconducting Transmission Line Magnets”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC101, pp. 301-303.
- F. Matichard, “System and Subsystem Engineering of Long Baseline Detectors”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper TUIO01, pp. XX-XX.
- O. Mete Apsimon et al., “Design Study for a Plasma Undulator Experiment Using Capillary Based Discharge Plasma Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1584-1587.
- G. Mavrogenes, G. Clifft, K. Johnson, W. Ramler, and W. Wesolowski, “Subnanosecond High-Intensity Beam Pulse”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 919-923.
- T. C. Thayer, N. Balakrishnan, M. A. Montironi, and A. Ratti, “Deployment and Operation of the Remotely Operated Accelerator Monitor (ROAM) Robot”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper WE3AO06, pp. 1077-1082.
- B. Lindstrom et al., “High Luminosity LHC collimation system performance for different optics configurations”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS029, pp. 663-666.
- P. Sprangle and A. Ting, “Gain of an FEL with an Unmatched Electron Beam”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 209-212.
- H. L. Andrews, C. A. Brau, and J. D. Jarvis, “Three-Dimensional Theory for a Smith-Purcell Free-Electron Laser with Grating Sidewalls”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH005, pp. 17-20.
- J. T. M. Lyles et al., “New RF System for First Drift Tube Linac Cavity at LANSCE”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 703-706.
- T. Dehaeze, J. Bonnefoy, and G. R. L. Collette, “Mechatronics Approach for the Development of a Nano-Active-Stabilization-System”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 93.
- V. A. Lebedev, “Antiproton Production and Accumulation”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper MOA2I04, pp. 39-43.
- T. L. He et al., “Bunch Lengthening of the HALF Storage Ring in the Presence of Passive Harmonic Cavities”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2082-2085.
Back to search