Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. A. Pikalov et al., “First Results of Experiments with the Extracted Carbon Beam at the U-70 Accelerator”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB19, pp. 197-199.
[n] A. Drago and D. Teytelman, “DANE Bunch-by-bunch Feedback Upgrade as SuperB Design Test”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO006, pp. 490-492.
[n] W. Herr, B. Goddard, E. Keil, M. Lamont, M. Meddahi, and E. Peschardt, “Experience with Bunch Trains in LEP”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6B007, pp. 309-311.
[n] K. Agari, Y. Morino, Y. Sato, and A. Toyoda, “Upgrades of Temperature Measurements and Interlock System for the Production Target at J-PARC Hadoron Experimental Facility”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 371-373. doi:10.18429/JACoW-ICALEPCS2015-MOPGF123
[n] N. Ogiwara et al., “A Non-destructive 2D Profile Monitor Using a Gas Sheet”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2190-2192. doi:10.18429/JACoW-IPAC2018-WEPAL018
[n] W. Wuensch, “Ultimate Field Gradient in Metallic Structures”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 24-29. doi:10.18429/JACoW-IPAC2017-MOYCA1
[n] M. A. Power and F. H. Munson, “Evolution of the Argonne Tandem Linear Accelerator System (ATLAS) Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS024, pp. 371-373.
[n] J. E. Ralph, C. E. Clayton, F. Fang, C. Joshi, K. A. Marsh, and A. E. Pak, “Experimental Investigation of Self-guiding using a Matched Laser Beam in a cm Scale Length Underdense Plasma”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS024, pp. 3052-3054.
[n] C. David, V. Schlott, and A. Jaggi, “A Zone Plate Based Beam Monitor for the Swiss Light Source”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS13, pp. XX-XX.
[n] M. Umezawa, K. Hiramoto, M. Tadokoro, and J. Hirota, “Magnetic Field Measurement of the Air Slot Dipole Magnet”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP168, pp. 3366-3368.
[n] B. Blind and A. J. Jason, “Laser Photoionization of H[degree] Beams for Charge-Changing Injection”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2795-2798.
[n] Y. Cai, W. Kozanecki, K. Ohmi, J. Seeman, and M. Tawada, “Simulations and Experiments of Beam-Beam Effects in e+e- Storage Rings”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MOPC006, pp. 520-524.
[n] S. U. De Silva, J. R. Delayen, and H. Park, “Higher Order Multipole Analysis for 952.6 Mhz Superconducting Crabbing Cavities for Jefferson Lab Electron-Ion Collider”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1177-1179. doi:10.18429/JACoW-IPAC2017-MOPVA136
[n] H. Heydari and T. Tille, “Reason for Free Electrons from the Surface of Ferroelectrics with a Metal Lattice Structure”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W037, pp. 2784-2786.
[n] J. Guo et al., “Development of Waveguide HOM Loads for BERLinPro and BESSY-VSR SRF Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1160-1163. doi:10.18429/JACoW-IPAC2017-MOPVA130
[n] T. Baumbach, “Synchrotron Technology for Industrial Research, Development and Quality Assurance - Experience in Commercial Services”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEIFI03, pp. 0-3645.
[n] V. Derenchuk, R. Brown, H. Petri, E. Stephenson, and M. Wedekind, “Emittance Measurements of the High Intensity Polarized Ion Source at IUCF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC08, pp. 1010-1012.
For LaTeX
Use Complete Form
For BibTeX
References
- V. A. Pikalov et al., “First Results of Experiments with the Extracted Carbon Beam at the U-70 Accelerator”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB19, pp. 197-199.
- A. Drago and D. Teytelman, “DANE Bunch-by-bunch Feedback Upgrade as SuperB Design Test”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO006, pp. 490-492.
- W. Herr, B. Goddard, E. Keil, M. Lamont, M. Meddahi, and E. Peschardt, “Experience with Bunch Trains in LEP”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6B007, pp. 309-311.
- K. Agari, Y. Morino, Y. Sato, and A. Toyoda, “Upgrades of Temperature Measurements and Interlock System for the Production Target at J-PARC Hadoron Experimental Facility”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 371-373.
- N. Ogiwara et al., “A Non-destructive 2D Profile Monitor Using a Gas Sheet”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2190-2192.
- W. Wuensch, “Ultimate Field Gradient in Metallic Structures”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 24-29.
- M. A. Power and F. H. Munson, “Evolution of the Argonne Tandem Linear Accelerator System (ATLAS) Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS024, pp. 371-373.
- J. E. Ralph, C. E. Clayton, F. Fang, C. Joshi, K. A. Marsh, and A. E. Pak, “Experimental Investigation of Self-guiding using a Matched Laser Beam in a cm Scale Length Underdense Plasma”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS024, pp. 3052-3054.
- C. David, V. Schlott, and A. Jaggi, “A Zone Plate Based Beam Monitor for the Swiss Light Source”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PS13, pp. XX-XX.
- M. Umezawa, K. Hiramoto, M. Tadokoro, and J. Hirota, “Magnetic Field Measurement of the Air Slot Dipole Magnet”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP168, pp. 3366-3368.
- B. Blind and A. J. Jason, “Laser Photoionization of H[degree] Beams for Charge-Changing Injection”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2795-2798.
- Y. Cai, W. Kozanecki, K. Ohmi, J. Seeman, and M. Tawada, “Simulations and Experiments of Beam-Beam Effects in e+e- Storage Rings”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPC006, pp. 520-524.
- S. U. De Silva, J. R. Delayen, and H. Park, “Higher Order Multipole Analysis for 952.6 Mhz Superconducting Crabbing Cavities for Jefferson Lab Electron-Ion Collider”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1177-1179.
- H. Heydari and T. Tille, “Reason for Free Electrons from the Surface of Ferroelectrics with a Metal Lattice Structure”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W037, pp. 2784-2786.
- J. Guo et al., “Development of Waveguide HOM Loads for BERLinPro and BESSY-VSR SRF Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1160-1163.
- T. Baumbach, “Synchrotron Technology for Industrial Research, Development and Quality Assurance - Experience in Commercial Services”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEIFI03, pp. 0-3645.
- V. Derenchuk, R. Brown, H. Petri, E. Stephenson, and M. Wedekind, “Emittance Measurements of the High Intensity Polarized Ion Source at IUCF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC08, pp. 1010-1012.
Back to search