Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Szumega et al., “Characterization of an IRRAD beam profile monitor at the CERN T8 beamline and possible improvements via cross-analysis with multiwire proportional chamber”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM111, unpublished.
[n] D. Raparia, A. G. Ruggiero, and J. Alessi, “A Superconducting LINAC Driver for the HFBR”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUD19, pp. 596-598.
[n] N. Yamamoto, A. Gamelin, and R. Nagaoka, “Investigation of Longitudinal Beam Dynamics With Harmonic Cavities by Using the Code Mbtrack”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 178-180. doi:10.18429/JACoW-IPAC2019-MOPGW039
[n] S. Anderson et al., “Commissioning of the Neptune Photoinjector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA53, pp. 2006-2008.
[n] B. Balhan et al., “Design and Construction of the CERN SPS Extraction Protection Elements for LIU”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2359-2362. doi:10.18429/JACoW-IPAC2019-WEPMP022
[n] J. Preble et al., “SNS Cryomodule Performance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA001, pp. 457-461.
[n] K. Cho, D. H. Han, Y. D. Oh, D. Son, and J. Lee, “A Test-bed of DCAF (DeCentralized Analysis Farm) in Korea”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP507, pp. XX-XX.
[n] N. El-Kassem, J. Emery, and F. Roncarolo, “Performance assessment of profile monitors at CERN’s LHC using systematic analysis tools”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM043, unpublished.
[n] T. A. Miller et al., “Multifunction Instrument Designs with Low Impedance Structures for Profile, Energy, and Emittance Measurements for LEReC at BNL”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 307-312. doi:10.18429/JACoW-IBIC2015-TUPB007
[n] J. Bisognano et al., “Wisconsin SRF Electron Gun Commissioning”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA19, pp. 622-624.
[n] V. B. Reva et al., “The Electron Cooling for High Energy”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1831-1833. doi:10.18429/JACoW-IPAC2021-TUPAB182
[n] C. Liu et al., “Reconfiguration of RHIC Straight Sections for the EIC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1916-1919. doi:10.18429/JACoW-IPAC2022-WEPOPT034
For LaTeX
Use Complete Form
For BibTeX
References
- J. Szumega et al., “Characterization of an IRRAD beam profile monitor at the CERN T8 beamline and possible improvements via cross-analysis with multiwire proportional chamber”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM111, this conference.
- D. Raparia, A. G. Ruggiero, and J. Alessi, “A Superconducting LINAC Driver for the HFBR”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUD19, pp. 596-598.
- N. Yamamoto, A. Gamelin, and R. Nagaoka, “Investigation of Longitudinal Beam Dynamics With Harmonic Cavities by Using the Code Mbtrack”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 178-180.
- S. Anderson et al., “Commissioning of the Neptune Photoinjector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA53, pp. 2006-2008.
- B. Balhan et al., “Design and Construction of the CERN SPS Extraction Protection Elements for LIU”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2359-2362.
- J. Preble et al., “SNS Cryomodule Performance”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAA001, pp. 457-461.
- K. Cho, D. H. Han, Y. D. Oh, D. Son, and J. Lee, “A Test-bed of DCAF (DeCentralized Analysis Farm) in Korea”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP507, pp. XX-XX.
- N. El-Kassem, J. Emery, and F. Roncarolo, “Performance assessment of profile monitors at CERN’s LHC using systematic analysis tools”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM043, this conference.
- T. A. Miller et al., “Multifunction Instrument Designs with Low Impedance Structures for Profile, Energy, and Emittance Measurements for LEReC at BNL”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 307-312.
- J. Bisognano et al., “Wisconsin SRF Electron Gun Commissioning”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA19, pp. 622-624.
- V. B. Reva et al., “The Electron Cooling for High Energy”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1831-1833.
- C. Liu et al., “Reconfiguration of RHIC Straight Sections for the EIC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1916-1919.
Back to search