Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Cannella, E. Chiaveri, A. Facco, A. M. Porcellato, F. Scarpa, and V. Zviagintsev, “On-line Performance of the LNL Mechanically Damped Superconducting Low Beta Resonators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP29G, pp. 1846-1848.
[n] N. Baboi et al., “New Electron Beam Diagnostics in the FLASH Dump Line”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM093, pp. 420-424.
[n] M. Justus, P. Evtushenko, U. Lehnert, and P. Michel, “Design of an Electron Beam Energy Control Loop Using Transverse Dispersion”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB01, pp. 229-231.
[n] H. Maesaka, T. Ohshima, Y. Otake, and S. Matsubara, “Design and Performance of the Optical Fiber Length Stabilization System for SACLA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1906-1908. doi:10.18429/JACoW-IPAC2014-WEOBB01
[n] N. Delerue et al., “Synchronization of a Photo-Injector and a High Power Laser With Independent Clocks”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3935-3937. doi:10.18429/JACoW-IPAC2017-THPAB093
[n] J. A. Holmes, S. M. Cousineau, T. V. Gorlov, M. A. Plum, and N. J. Evans, “Progress Toward a Self-Consistent Beam at the Spallation Neutron Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3382-3384. doi:10.18429/JACoW-IPAC2018-THPAK067
[n] J. Resta-L??pez, J. Alabau-Gonzalvo, R. Apsimon, P. Burrows, G. B. Christian, and B. Constance, “Simulation Study of Intra-train Feedback Systems for Nanometer Beam Stabilization at ATF2”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB039, pp. 2773-2775.
[n] A. Willner, H. Delsim-Hashemi, O. Grimm, J. Rossbach, and B. Schmidt, “Bunch Diagnostics with Coherent Infrared Undulator Radiation at FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC110, pp. 1320-1322.
[n] W. Goettmann, M. Koerfer, and F. Wulf, “Beam Profile Measurement with Optical Fiber Sensors at FLASH”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB25, pp. 123-125.
[n] A. Noda, M. Inoue, Y. Iwashita, H. Okamoto, and T. Shirai, “Design Study of Compact Proton Synchrotron for Biomedical Use”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1663-1666.
[n] D. Alesini et al., “The Damped C-band RF Structures for the European ELI-NP Proposal”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI013, pp. 2726-2728.
[n] K. Harada et al., “Lattice and Optics Designs of the Test ERL in Japan”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 28, pp. 26-29.
[n] H. Krueger et al., “Designing the Photon Beamline Frontends in the PETRAIII Extension Project”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 330-332. doi:10.18429/JACoW-MEDSI2016-WEPE09
[n] Xiong S., Dong B., Tan Y., Yan Y., “Upgrading Beam Line Interlock and Control Systems at the BSRF”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper WC1P02, pp. XX-XX.
[n] K. Yonehara et al., “Doped H2-Filled RF Cavities for Muon Beam Cooling”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP020, pp. 855-857.
[n] K. Sakaue et al., “3-Dimensional Beam Profile Monitor Based on a Pulse Storage in an Optical Cavity for Multi-Bunch Electron Beam”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3GRC04, pp. 1925-1927.
[n] C. H. Rivetta, J. E. Dusatko, J. D. Fox, O. Turgut, S. De Santis, and W. H?Âfle, “Wideband Vertical Intra-Bunch Feedback At The SPS - 2015 Results And Path Forward”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1353-1355. doi:10.18429/JACoW-IPAC2015-TUAC2
[n] F. R??diger, W. Goettmann, M. Koerfer, G. Schmidt, and K. Wille, “Beam Loss Position Monitoring with Optical Fibres at DELTA”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUOCM03, pp. 1032-1034.
[n] G. Castorina et al., “A TM01 Mode Launcher With Quadrupole Field Components Cancellation for High Brightness Applications”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3631-3633. doi:10.18429/JACoW-IPAC2018-THPAL009
[n] M. Ferrario et al., “Recent Results of the SPARC Project”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH048, pp. 359-362.
[n] S. Huang et al., “Study of High Transformer Ratio Plasma Wakefield Acceleration for Accelerator Parameters of SXFEL Using 3D PIC Simulations”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1734-1736. doi:10.18429/JACoW-IPAC2017-TUPIK024
[n] D. B. Belohrad, “First Tests of the Machine Protection System for CTF3”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW006, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Cannella, E. Chiaveri, A. Facco, A. M. Porcellato, F. Scarpa, and V. Zviagintsev, “On-line Performance of the LNL Mechanically Damped Superconducting Low Beta Resonators”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP29G, pp. 1846-1848.
- N. Baboi et al., “New Electron Beam Diagnostics in the FLASH Dump Line”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM093, pp. 420-424.
- M. Justus, P. Evtushenko, U. Lehnert, and P. Michel, “Design of an Electron Beam Energy Control Loop Using Transverse Dispersion”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB01, pp. 229-231.
- H. Maesaka, T. Ohshima, Y. Otake, and S. Matsubara, “Design and Performance of the Optical Fiber Length Stabilization System for SACLA”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1906-1908.
- N. Delerue et al., “Synchronization of a Photo-Injector and a High Power Laser With Independent Clocks”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3935-3937.
- J. A. Holmes, S. M. Cousineau, T. V. Gorlov, M. A. Plum, and N. J. Evans, “Progress Toward a Self-Consistent Beam at the Spallation Neutron Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3382-3384.
- J. Resta-L??pez, J. Alabau-Gonzalvo, R. Apsimon, P. Burrows, G. B. Christian, and B. Constance, “Simulation Study of Intra-train Feedback Systems for Nanometer Beam Stabilization at ATF2”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB039, pp. 2773-2775.
- A. Willner, H. Delsim-Hashemi, O. Grimm, J. Rossbach, and B. Schmidt, “Bunch Diagnostics with Coherent Infrared Undulator Radiation at FLASH”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC110, pp. 1320-1322.
- W. Goettmann, M. Koerfer, and F. Wulf, “Beam Profile Measurement with Optical Fiber Sensors at FLASH”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB25, pp. 123-125.
- A. Noda, M. Inoue, Y. Iwashita, H. Okamoto, and T. Shirai, “Design Study of Compact Proton Synchrotron for Biomedical Use”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1663-1666.
- D. Alesini et al., “The Damped C-band RF Structures for the European ELI-NP Proposal”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI013, pp. 2726-2728.
- K. Harada et al., “Lattice and Optics Designs of the Test ERL in Japan”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 28, pp. 26-29.
- H. Krueger et al., “Designing the Photon Beamline Frontends in the PETRAIII Extension Project”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 330-332.
- Xiong S., Dong B., Tan Y., Yan Y., “Upgrading Beam Line Interlock and Control Systems at the BSRF”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper WC1P02, pp. XX-XX.
- K. Yonehara et al., “Doped H2-Filled RF Cavities for Muon Beam Cooling”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP020, pp. 855-857.
- K. Sakaue et al., “3-Dimensional Beam Profile Monitor Based on a Pulse Storage in an Optical Cavity for Multi-Bunch Electron Beam”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3GRC04, pp. 1925-1927.
- C. H. Rivetta, J. E. Dusatko, J. D. Fox, O. Turgut, S. De Santis, and W. H?Âfle, “Wideband Vertical Intra-Bunch Feedback At The SPS - 2015 Results And Path Forward”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1353-1355.
- F. R??diger, W. Goettmann, M. Koerfer, G. Schmidt, and K. Wille, “Beam Loss Position Monitoring with Optical Fibres at DELTA”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUOCM03, pp. 1032-1034.
- G. Castorina et al., “A TM01 Mode Launcher With Quadrupole Field Components Cancellation for High Brightness Applications”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3631-3633.
- M. Ferrario et al., “Recent Results of the SPARC Project”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH048, pp. 359-362.
- S. Huang et al., “Study of High Transformer Ratio Plasma Wakefield Acceleration for Accelerator Parameters of SXFEL Using 3D PIC Simulations”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1734-1736.
- D. B. Belohrad, “First Tests of the Machine Protection System for CTF3”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POW006, pp. XX-XX.
Back to search