JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Iwata et al., “Upgrade of Septum Magnets for Fast Extraction in J-Parc Main Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2103-2105. doi:10.18429/JACoW-IPAC2022-WEPOTK024
[n]	X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB048, unpublished. 
[n]	M. Zampetakis et al., “Refining the LHC Longitudinal Impedance Model”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 559-562. doi:10.18429/JACoW-HB2023-THBP37
[n]	M. Okamura, J. M. Fite, V. Lo Destro, D. Raparia, and J. Ritter, “Steering Magnet Design for a Limited Space”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP005, pp. 136-138. 
[n]	Y. G. Song, S. Y. Cho, and J. H. Kim, “EPICS DAQ System for Beam Position Monitor at the KOMAC Linac and Beamlines”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 447-449. doi:10.18429/JACoW-ICALEPCS2021-TUPV027
[n]	J. P. Dai, “Design Study of Beijing XFEL Test Facility”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP025, pp. XX-XX. 
[n]	J. Friedl, “DELTA, The Dortmund Electron Test Storage Ring Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 463-466. 
[n]	D. Bruhwiler, J. R. Cary, R. E. Giacone, P. Mardahl, and J. Verboncoeur, “Simulations of Plasma Wakefield Acceleration with XOOPIC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B04, pp. 877-879. 
[n]	A. Dolinskii et al., “Simulation Results on Cooling Times and Equilibrium Parameters for Antiproton Beams at the HESR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT057, pp. 1972-1974. 
[n]	G. Lawler et al., “High gradient operation of cryogenic C-band RF photogun at UCLA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 527-530. doi:10.18429/JACoW-IPAC2024-MOPR32
[n]	Yu. A. Kubyshin, A. V. Aloev, N. I. Pakhomov, and V. I. Shvedunov, “A Novel Electron Gun for Off-axis Beam Injection”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP290, pp. 2029-2031. 
[n]	S. Keckert et al., “Mitigation of Parasitic Losses in the Quadrupole Resonator Enabling Direct Measurements of Low Residual Resistances of SRF Samples”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1196-1199. doi:10.18429/JACoW-IPAC2022-TUPOTK005
[n]	E. Wisniewski et al., “Fabrication study of corrugated structure for sub-THz by stacking disks”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR28, unpublished. 
[n]	J. P. Koutchouk, “Architecture of the LEP Application Software”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1199-1202. 
[n]	B. Bondarev, A. Durkin, Y. Ivanov, I. Shumakov, and S. Vinogradov, “Some Results of RFQ Modelling Based on New Possibilities of LIDOS.RFQ Codes”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE110, pp. 1616-1618. 
[n]	M. Zhang and Q. G. Zhou, “Study of Nonlinear Beam Dynamics Effects for DEPU at SSRF”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC075, pp. 1347-1349. 
[n]	D. Suddeth, “Microwave Ridged Waveguide Beam Pickups”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1886-1888. 
[n]	K. Kawa, T. Szumlak, C. Kokkinos, and F. Lackner, “High fidelity numerical modelling and condition monitoring applied to septum magnets at CERN”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3556-3559. doi:10.18429/JACoW-IPAC2024-THPR29
[n]	R. Ferdinand et al., “Final Results of the SPIRAL2 Injector Commissioning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 848-851. doi:10.18429/JACoW-IPAC2019-MOPTS006
[n]	R. L. Parise et al., “Development of Diffusion Bonded Joints of AA6061 Aluminum Alloy to AISI 316LN Stainless Steel for Sirius Planar Undulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3459-3462. doi:10.18429/JACoW-IPAC2021-WEPAB334
[n]	D. Young, “Design of Drift Tube Linacs”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-03, pp. 76-97. 
[n]	C. Liu et al., “Longitudinal Dynamics Simulation at Transition Crossing in RHIC with New Landau Cavity”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB08, pp. 37-39. 
[n]	N. D. West, “The Nimrod Injector”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper A-04, pp. 38-49. 
[n]	M. Shimada and Y. Kobayashi, “Design of a 2-Loop Compact ERL”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper WG208, pp. 50-52. 
[n]	I. Miura et al., “Proposal for a New Ring Accelerator”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-08, pp. 2074-2077. 
[n]	C. Liu, K. A. Drees, A. Marusic, M. G. Minty, and C. Montag, “Global Optics Correction for Low Energy RHIC Run”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB05, pp. 34-36. 
[n]	S. Iwata et al., “Development of a pulse current monitoring device for the Eddy septum magnets in J-PARC main ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2463-2466. doi:10.18429/JACoW-IPAC2023-TUPM104
[n]	A. I. Novokshonov et al., “Scintillator Nonproportionality Studies at PITZ”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 277-280. doi:10.18429/JACoW-IBIC2022-TUP21

For LaTeX

Use Complete Form

For BibTeX

References

Back to search