Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Bellato, A. Dainelli, and M. Poggie, “commissioning and Developments of the ALPI Diagnostics System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1512-1515.
[n] G. Martinet, S. Blivet, M. Fouaidy, and N. Hammoudi, “Development of a TE011 Cavity for Thin-Films Study”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO039, pp. 293-296.
[n] L. Zhang et al., “An X-Band Linac with Tunable Beam Energy”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1644-1646. doi:10.18429/JACoW-IPAC2015-TUPJE014
[n] V. Aleksandrov, N. Kazarinov, and V. Shevtsov, “MULTI-COMPONENT ION BEAM CODE ? MCIB04”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBP09, pp. 201-203.
[n] J. R. Shi, H. B. Chen, C. X. Tang, S. X. Zheng, and D. Li, “Impedance Simulation and Waveguide Damping Study of a Superconducting Deflecting Cavity for ALS at LBNL”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP35, pp. XX-XX.
[n] J. C. Sheppard et al., “Acceleration of High Charge Density Electron Beams in the SLAC Linac”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0040, pp. 439-442.
[n] M. Fouaidy, N. Hammoudi, M. S. Saki, H. Saugnac, and L. Simonet, “Electromechanical Characterization of Piezoelectric Actuators Subjected to a Variable Preloading Force at Cryogenic Temperature”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH143, pp. 387-389.
[n] M. Fouaidy, S. Bousson, N. Hammoudi, T. Junquera, J. C. Le Scornet, and J. Lesrel, “Kapitza Conductance and Thermal Conductivity of Materials used for SRF Cavities Fabrication”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP028, pp. 263-266.
[n] R. Bailey et al., “LEP Energy Calibration”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1765-1768.
[n] F. Ehm, Y. Fischer, G. M. Gorgogianni, S. Jensen, and P. Jurcso, “CMX - A Generic Solution to Expose Monitoring Metrics in C and C++ Applications”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC014, pp. 1118-1121.
[n] Z. Fang, I. I. Averboukh, K. Egawa, K. Endo, and T. Hirashima, “RF Cavities and Power Amplifier for the Compact Proton Synchrotron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG028, pp. 1074-1076.
[n] H. Tanaka, “Status Report on the Commissioning of the Japanese XFEL at SPring-8”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOYCA01, pp. 21-25.
[n] G. A. Westenskow et al., “Relativistic Klystrons for High-Gradient Accelerators”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO452, pp. 192-194.
[n] G. Tool, R. Flora, P. Martin, and D. Wolff, “Energy Saver Partial Ring Power Tests”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2889-2892.
[n] R. F. Lankshear, “New England Nuclear Linac RF Power System”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S6-3, pp. 340-343.
[n] A. Boscolo, M. B. Danailov, M. Ferianis, F. Iazzourene, and L. Sardo, “Stellar Interferometry vs Direct Imaging for Synchrotron Radiation Profile Measurements”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B14, pp. 1732-1734.
[n] C. Fischer and G. Guignard, “Treatment of Non-Linearities in Achromatic Trajectory Corrections for Future Linacs”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 729-732.
[n] A. Schnase et al., “Progress of the Klystron and Cavity Test Stand for the FAIR Proton Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2802-2804. doi:10.18429/JACoW-IPAC2015-WEPMA022
[n] R. J. Averill et al., “Positron-Electron Multicycle Injection at the CEA Colliding Beam Project”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 221-224.
[n] H. Tanaka, “The SPring-8 Angstrom Compact Free Electron Laser (SACLA)”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEYB01, pp. 2106-2110.
[n] K. Endo, K. Egawa, Z. Fang, and S. Yamanaka, “Hardware Tracking Related to Compact Medical Pulse Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP032, pp. 2260-2262.
[n] I. Titkova, P. Beloshitsky, and I. N. Meshkov, “Optics and Dynamic Aperture Studies for Synchrotron Radiation Source DELSY”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH326, pp. 2821-2823.
[n] J.-L. Biarrotte, T. Junquera, and A. C. Mueller, “A European Advanced Technology Programme for ADS Accelerator Development”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP35, pp. 541-543.
[n] P. N. Potukuchi et al., “The Booster Linac for the New Delhi Pelletron”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93J06, pp. XX-XX.
[n] G. Troubnikov et al., “The Low Energy Positron Storage Ring for Positronium Generation: Status and Developments”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO017, pp. 1103-1105.
[n] S. I. Tomin, G. Geloni, I. V. Agapov, W. Decking, M. Scholz, and I. Zagorodnov, “On-line Optimization of European XFEL with OCELOT”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1038-1042. doi:10.18429/JACoW-ICALEPCS2017-WEAPL07
[n] P. Ausset et al., “Transverse Beam Profile Measurements for High Power Proton Beams”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THBGB003, pp. 245-247.
[n] W. S. Graves et al., “DUVFEL Photoinjector Dynamics: Measurement and Simulation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH060, pp. 2230-2232.
[n] J. F. Sheehan, R. F. Lankshear, and R. L. Witkover, “The RF System for the AGS Linac Injector”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 217-223.
[n] Y. Lee, R. Miyamoto, T. J. Shea, and H. D. Thomsen, “The Beam Conditions on the Target and its Operational Impacts on Beam Intercepting Devices at European Spallation Source”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 110-115. doi:10.18429/JACoW-HB2018-TUP2WE02
[n] G. Olry et al., “Development of Spoke Cavities for the EURISOL and EUROTRANS Projects”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP38, pp. 328-330.
[n] J. Pradhan et al., “Characterization of Superconducting Cable for K-500 Superconducting Cyclotron Magnet Coil”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper WEM204, pp. XX-XX.
[n] S. Krainara, P. Klysubun, S. Kongtawong, T. Pulampong, P. Sudmuang, and P. Sunwong, “Analysis of Nonlinear Effects for IDs at the SPS Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3512-3514. doi:10.18429/JACoW-IPAC2016-THPMR048
[n] X. Escaler et al., “Thermo-Fluid Study of the UPC Race-Track Microtron Cooling System”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 173-175. doi:10.18429/JACoW-MEDSI2016-TUPE09
[n] R. Corsini et al., “A New Method of RF Power Generation for Two-Beam Linear Colliders”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THOC01A, pp. 248-252.
[n] R. Heese, “Status of the National Synchrotron Light Source”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 400-405.
[n] H. Gassot, S. Blivet, T. Junquera, G. Olry, and E. Zaplatin, “Mechanical Studies of the Multi-Gap Spoke Cavity for European Project HIPPI”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP33, pp. 312-313.
[n] M. Fouaidy et al., “Electromechanical, Thermal Properties and Radiation Hardness Tests of Piezoelectric Actuators at Low Temperature”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP60, pp. 608-610.
[n] A. Boscolo, “Analog Front-End Electronics in Beam Instrumentation”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper ITTM01, pp. XX-XX.
[n] T. Ishida, E. Kadokura, and T. Kawakubo, “The Data-taking and Display System by VXI for Observing a Circulating Beam Profile without any Disturbance”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP051L, pp. 1663-1665.
[n] G. Bassato et al., “Automatic Multipactoring Conditioning of the Super-Conducting Resonators in the ALPI Linac”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP033L, pp. 2109-2111.
[n] K. Batchelor, J. Bittner, T. Dickinson, V. Racaniello, and J. Sheehan, “The Linac for the National Synchrotron Light Source”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S1-4, pp. 13-16.
[n] A. N. Pham, S.-Y. Lee, and T. H. Luo, “The Alpha Ferrite-loaded Coaxial Resonator Cavity”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC036, pp. 3365-3367.
[n] H. W. Mostert et al., “Two-Dimensional Ionization Beam Profile Measurement”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD38, pp. 384-386.
[n] J. P. Gourber, G. Guignard, A. Hofmann, J. P. Koutchouk, and H. Moshammer, “Compensation of Linear Betatron Coupling in LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1429-1432.
[n] G. Guignard, L. Hand, J. P. Koutchouk, and H. Moshammer, “Measurement and Compensation of the Solenoid Effects in LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1432-1435.
[n] Z. Fang, K. Endo, K. Egawa, T. Hirashima, Y. Cho, and T. Fusato, “Test Results of RF Cavity and Power Amplifier for Compact Medical Proton Synchrotron”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16004, pp. XX-XX.
[n] V. Palmieri, R. Preciso, V. L. Ruzinov, L. Badan, and A. M. Porcellato, “Sputtering of Niobium Thin Films onto Copper Quarter Wave Resonators”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E11, pp. XX-XX.
[n] M. Fouaidy et al., “Full Characterization at Low Temperature of Piezoelectric Actuators Used for SRF Cavities Active Tuning”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FOAA010, pp. 728-730.
[n] S. Maury, P. Beloshitsky, C. Carli, D. Möhl, and F. Pedersen, “Optics for the Antiproton Decelerator at CERN”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH051, pp. 2563-2565.
[n] F. Noto, M. Cafici, A. Carbonaro, A. Di Stefano, A. Pagano, and F. Speziale, “Status and Upgrade of the Cryogenic Plant of the LNS Superconducting Cyclotron After 25 Years of Operation”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 325-327. doi:10.18429/JACoW-Cyclotrons2016-THP10
[n] P.-A. Duperrex, V. Gandel, D. C. Kiselev, Y. Lee, and U. Müller, “New On-line Gain Drift Compensation for Resonant Current Monitor under Heavy Heat Load”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE063, pp. 1122-1124.
[n] S. Crispel et al., “Cryogenic System Design for SPIRAL2 LINAC Project at GANIL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA068, pp. 3825-3827.
[n] V. Palmieri et al., “Niobium Sputtered Quarter Wave Resonators”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1292-1295.
[n] V. J. Kovarik and Th. J. M. Sluyters, “Discussion of H.V. Power Supply Units Connected with High Gradient Tubes in Linac Preinjectors”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper D-3, pp. 251-268.
[n] M. Fouaidy and N. Hammoudi, “Characterization of Piezoelectric Actuators Used for SRF Cavities Active Tuning at Low Temperature”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP23, pp. 669-674.
[n] V. Palmieri et al., “Recent Experience with the Spinning of 1.5 GHz Seamless Copper Monocells”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F08, pp. 571-579.
[n] T. Watanabe, S. Takano, and H. Tanaka, “Updates on Hardware Developments for SPring-8-II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4209-4212. doi:10.18429/JACoW-IPAC2018-THPMF061
[n] M. Takao, K. Soutome, Y. Shimosaki, and H. Tanaka, “Touschek Beam Loss Simulation for Light Source Storage Rings”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4206-4208. doi:10.18429/JACoW-IPAC2018-THPMF060
[n] C. Fischer, G. Guignard, and A. Millich, “Investigations on Beam Damping Simulations and the Associated Model of CLIC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3234-3237.
[n] A. Millich, “Optimization of CLIC Transfer Structure (CTS) Design to Meet New Drive Beam Parameters”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ25, pp. 1779-1780.
[n] Y. Lee, “Dynamic Response of Spallation Volume to Beam Raster on the European Spallation Source Target”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3552-3554. doi:10.18429/JACoW-IPAC2021-WEPAB363
[n] K. Endo, K. Egawa, Z. Fang, and S. Yamanaka, “Magnet and RF Systems of Small Pulse Synchrotron for Radiotherapy”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT072, pp. 2661-2663.
[n] Y. Shimosaki, K. Soutome, M. Takao, and H. Tanaka, “Simulation Studies of Beam Commissioning and Expected Performance of the SPring-8-II Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4203-4205. doi:10.18429/JACoW-IPAC2018-THPMF059
[n] V. Palmieri, R. Preciso, V. L. Ruzinov, S. Yu. Stark, and I. I. Kulik, “Cold Forming of 1.5 GHz Multicell Cavities of the Seamless Type Obtained by Spinning a Circular Blank or a Tube”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F12, pp. 595-604.
[n] Z. Fang, K. Endo, I. I. Averboukh, Y. Kijima, and T. Nagayama, “A Broadband and High Gradient RF Cavity for a Compact Proton Synchrotron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE089, pp. 2145-2147.
[n] H. Deruyter, H. A. Hoag, K. Ko, and C.-K. Ng, “Symmetrical Double Input Coupler Development”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-39, pp. 407-409.
[n] Z. Fang et al., “RF System for Compact Medical Proton Synchrotron”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF035, pp. 1039-1041.
[n] M. A. Allen, M. Cornacchia, and A. Millich, “A Longitudinal Feedback System for PEP”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3287-3291.
[n] S. Yamanaka, K. Egawa, K. Endo, and Z. Fang, “Power Supply for Magnet of Compact Proton and/or Heavy Ion Synchrotron for Radiotherapy”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE071, pp. 3859-3861.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Bellato, A. Dainelli, and M. Poggie, “commissioning and Developments of the ALPI Diagnostics System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1512-1515.
- G. Martinet, S. Blivet, M. Fouaidy, and N. Hammoudi, “Development of a TE011 Cavity for Thin-Films Study”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO039, pp. 293-296.
- L. Zhang et al., “An X-Band Linac with Tunable Beam Energy”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1644-1646.
- V. Aleksandrov, N. Kazarinov, and V. Shevtsov, “MULTI-COMPONENT ION BEAM CODE ? MCIB04”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THBP09, pp. 201-203.
- J. R. Shi, H. B. Chen, C. X. Tang, S. X. Zheng, and D. Li, “Impedance Simulation and Waveguide Damping Study of a Superconducting Deflecting Cavity for ALS at LBNL”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP35, pp. XX-XX.
- J. C. Sheppard et al., “Acceleration of High Charge Density Electron Beams in the SLAC Linac”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0040, pp. 439-442.
- M. Fouaidy, N. Hammoudi, M. S. Saki, H. Saugnac, and L. Simonet, “Electromechanical Characterization of Piezoelectric Actuators Subjected to a Variable Preloading Force at Cryogenic Temperature”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH143, pp. 387-389.
- M. Fouaidy, S. Bousson, N. Hammoudi, T. Junquera, J. C. Le Scornet, and J. Lesrel, “Kapitza Conductance and Thermal Conductivity of Materials used for SRF Cavities Fabrication”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP028, pp. 263-266.
- R. Bailey et al., “LEP Energy Calibration”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1765-1768.
- F. Ehm, Y. Fischer, G. M. Gorgogianni, S. Jensen, and P. Jurcso, “CMX - A Generic Solution to Expose Monitoring Metrics in C and C++ Applications”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC014, pp. 1118-1121.
- Z. Fang, I. I. Averboukh, K. Egawa, K. Endo, and T. Hirashima, “RF Cavities and Power Amplifier for the Compact Proton Synchrotron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG028, pp. 1074-1076.
- H. Tanaka, “Status Report on the Commissioning of the Japanese XFEL at SPring-8”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOYCA01, pp. 21-25.
- G. A. Westenskow et al., “Relativistic Klystrons for High-Gradient Accelerators”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO452, pp. 192-194.
- G. Tool, R. Flora, P. Martin, and D. Wolff, “Energy Saver Partial Ring Power Tests”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2889-2892.
- R. F. Lankshear, “New England Nuclear Linac RF Power System”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S6-3, pp. 340-343.
- A. Boscolo, M. B. Danailov, M. Ferianis, F. Iazzourene, and L. Sardo, “Stellar Interferometry vs Direct Imaging for Synchrotron Radiation Profile Measurements”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B14, pp. 1732-1734.
- C. Fischer and G. Guignard, “Treatment of Non-Linearities in Achromatic Trajectory Corrections for Future Linacs”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 729-732.
- A. Schnase et al., “Progress of the Klystron and Cavity Test Stand for the FAIR Proton Linac”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2802-2804.
- R. J. Averill et al., “Positron-Electron Multicycle Injection at the CEA Colliding Beam Project”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 221-224.
- H. Tanaka, “The SPring-8 Angstrom Compact Free Electron Laser (SACLA)”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEYB01, pp. 2106-2110.
- K. Endo, K. Egawa, Z. Fang, and S. Yamanaka, “Hardware Tracking Related to Compact Medical Pulse Synchrotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP032, pp. 2260-2262.
- I. Titkova, P. Beloshitsky, and I. N. Meshkov, “Optics and Dynamic Aperture Studies for Synchrotron Radiation Source DELSY”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH326, pp. 2821-2823.
- J.-L. Biarrotte, T. Junquera, and A. C. Mueller, “A European Advanced Technology Programme for ADS Accelerator Development”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP35, pp. 541-543.
- P. N. Potukuchi et al., “The Booster Linac for the New Delhi Pelletron”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93J06, pp. XX-XX.
- G. Troubnikov et al., “The Low Energy Positron Storage Ring for Positronium Generation: Status and Developments”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO017, pp. 1103-1105.
- S. I. Tomin, G. Geloni, I. V. Agapov, W. Decking, M. Scholz, and I. Zagorodnov, “On-line Optimization of European XFEL with OCELOT”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1038-1042.
- P. Ausset et al., “Transverse Beam Profile Measurements for High Power Proton Beams”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THBGB003, pp. 245-247.
- W. S. Graves et al., “DUVFEL Photoinjector Dynamics: Measurement and Simulation”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH060, pp. 2230-2232.
- J. F. Sheehan, R. F. Lankshear, and R. L. Witkover, “The RF System for the AGS Linac Injector”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 217-223.
- Y. Lee, R. Miyamoto, T. J. Shea, and H. D. Thomsen, “The Beam Conditions on the Target and its Operational Impacts on Beam Intercepting Devices at European Spallation Source”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 110-115.
- G. Olry et al., “Development of Spoke Cavities for the EURISOL and EUROTRANS Projects”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP38, pp. 328-330.
- J. Pradhan et al., “Characterization of Superconducting Cable for K-500 Superconducting Cyclotron Magnet Coil”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper WEM204, pp. XX-XX.
- S. Krainara, P. Klysubun, S. Kongtawong, T. Pulampong, P. Sudmuang, and P. Sunwong, “Analysis of Nonlinear Effects for IDs at the SPS Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3512-3514.
- X. Escaler et al., “Thermo-Fluid Study of the UPC Race-Track Microtron Cooling System”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 173-175.
- R. Corsini et al., “A New Method of RF Power Generation for Two-Beam Linear Colliders”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THOC01A, pp. 248-252.
- R. Heese, “Status of the National Synchrotron Light Source”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 400-405.
- H. Gassot, S. Blivet, T. Junquera, G. Olry, and E. Zaplatin, “Mechanical Studies of the Multi-Gap Spoke Cavity for European Project HIPPI”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP33, pp. 312-313.
- M. Fouaidy et al., “Electromechanical, Thermal Properties and Radiation Hardness Tests of Piezoelectric Actuators at Low Temperature”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP60, pp. 608-610.
- A. Boscolo, “Analog Front-End Electronics in Beam Instrumentation”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper ITTM01, pp. XX-XX.
- T. Ishida, E. Kadokura, and T. Kawakubo, “The Data-taking and Display System by VXI for Observing a Circulating Beam Profile without any Disturbance”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP051L, pp. 1663-1665.
- G. Bassato et al., “Automatic Multipactoring Conditioning of the Super-Conducting Resonators in the ALPI Linac”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP033L, pp. 2109-2111.
- K. Batchelor, J. Bittner, T. Dickinson, V. Racaniello, and J. Sheehan, “The Linac for the National Synchrotron Light Source”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S1-4, pp. 13-16.
- A. N. Pham, S.-Y. Lee, and T. H. Luo, “The Alpha Ferrite-loaded Coaxial Resonator Cavity”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC036, pp. 3365-3367.
- H. W. Mostert et al., “Two-Dimensional Ionization Beam Profile Measurement”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD38, pp. 384-386.
- J. P. Gourber, G. Guignard, A. Hofmann, J. P. Koutchouk, and H. Moshammer, “Compensation of Linear Betatron Coupling in LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1429-1432.
- G. Guignard, L. Hand, J. P. Koutchouk, and H. Moshammer, “Measurement and Compensation of the Solenoid Effects in LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1432-1435.
- Z. Fang, K. Endo, K. Egawa, T. Hirashima, Y. Cho, and T. Fusato, “Test Results of RF Cavity and Power Amplifier for Compact Medical Proton Synchrotron”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16004, pp. XX-XX.
- V. Palmieri, R. Preciso, V. L. Ruzinov, L. Badan, and A. M. Porcellato, “Sputtering of Niobium Thin Films onto Copper Quarter Wave Resonators”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91E11, pp. XX-XX.
- M. Fouaidy et al., “Full Characterization at Low Temperature of Piezoelectric Actuators Used for SRF Cavities Active Tuning”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAA010, pp. 728-730.
- S. Maury, P. Beloshitsky, C. Carli, D. Möhl, and F. Pedersen, “Optics for the Antiproton Decelerator at CERN”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH051, pp. 2563-2565.
- F. Noto, M. Cafici, A. Carbonaro, A. Di Stefano, A. Pagano, and F. Speziale, “Status and Upgrade of the Cryogenic Plant of the LNS Superconducting Cyclotron After 25 Years of Operation”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 325-327.
- P.-A. Duperrex, V. Gandel, D. C. Kiselev, Y. Lee, and U. Müller, “New On-line Gain Drift Compensation for Resonant Current Monitor under Heavy Heat Load”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE063, pp. 1122-1124.
- S. Crispel et al., “Cryogenic System Design for SPIRAL2 LINAC Project at GANIL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA068, pp. 3825-3827.
- V. Palmieri et al., “Niobium Sputtered Quarter Wave Resonators”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1292-1295.
- V. J. Kovarik and Th. J. M. Sluyters, “Discussion of H.V. Power Supply Units Connected with High Gradient Tubes in Linac Preinjectors”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper D-3, pp. 251-268.
- M. Fouaidy and N. Hammoudi, “Characterization of Piezoelectric Actuators Used for SRF Cavities Active Tuning at Low Temperature”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP23, pp. 669-674.
- V. Palmieri et al., “Recent Experience with the Spinning of 1.5 GHz Seamless Copper Monocells”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F08, pp. 571-579.
- T. Watanabe, S. Takano, and H. Tanaka, “Updates on Hardware Developments for SPring-8-II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4209-4212.
- M. Takao, K. Soutome, Y. Shimosaki, and H. Tanaka, “Touschek Beam Loss Simulation for Light Source Storage Rings”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4206-4208.
- C. Fischer, G. Guignard, and A. Millich, “Investigations on Beam Damping Simulations and the Associated Model of CLIC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3234-3237.
- A. Millich, “Optimization of CLIC Transfer Structure (CTS) Design to Meet New Drive Beam Parameters”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ25, pp. 1779-1780.
- Y. Lee, “Dynamic Response of Spallation Volume to Beam Raster on the European Spallation Source Target”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3552-3554.
- K. Endo, K. Egawa, Z. Fang, and S. Yamanaka, “Magnet and RF Systems of Small Pulse Synchrotron for Radiotherapy”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT072, pp. 2661-2663.
- Y. Shimosaki, K. Soutome, M. Takao, and H. Tanaka, “Simulation Studies of Beam Commissioning and Expected Performance of the SPring-8-II Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4203-4205.
- V. Palmieri, R. Preciso, V. L. Ruzinov, S. Yu. Stark, and I. I. Kulik, “Cold Forming of 1.5 GHz Multicell Cavities of the Seamless Type Obtained by Spinning a Circular Blank or a Tube”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F12, pp. 595-604.
- Z. Fang, K. Endo, I. I. Averboukh, Y. Kijima, and T. Nagayama, “A Broadband and High Gradient RF Cavity for a Compact Proton Synchrotron”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE089, pp. 2145-2147.
- H. Deruyter, H. A. Hoag, K. Ko, and C.-K. Ng, “Symmetrical Double Input Coupler Development”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-39, pp. 407-409.
- Z. Fang et al., “RF System for Compact Medical Proton Synchrotron”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF035, pp. 1039-1041.
- M. A. Allen, M. Cornacchia, and A. Millich, “A Longitudinal Feedback System for PEP”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3287-3291.
- S. Yamanaka, K. Egawa, K. Endo, and Z. Fang, “Power Supply for Magnet of Compact Proton and/or Heavy Ion Synchrotron for Radiotherapy”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE071, pp. 3859-3861.
Back to search