Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. S. Alimov et al., “BEAM PARAMETERS MEASUREMENT OF TECHNOLOGICAL 10 MEV LINAC”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH11, pp. XX-XX.
[n] N. J. Sammut, L. Bottura, J. Micallef, and S. Sanfilippo, “The Field Description Model for the LHC Quadrupole Superconducting Magnets”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS103, pp. 2619-2621.
[n] T. Honda, Y. Kobayashi, C. Mitsuda, S. Nagahashi, R. Takai, and H. Takaki, “Operational Status of Photon Factory Light Sources”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 350-353. doi:10.18429/JACoW-IPAC2021-MOPAB093
[n] K. P. Wootton et al., “Synchrotron Light Monitor for the Advanced Photon Source Booster Synchrotron”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 358-362. doi:10.18429/JACoW-IBIC2023-WEP015
[n] T. Nakamura, S. Dat?®, K. Kobayashi, and T. Ohshima, “Transverse Bunch-by-bunch Feedback System for the SPring-8 Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT068, pp. 2649-2651.
[n] V. A. Andreev et al., “Development of a Radioactive Nuclides Accelerator at the Moscow Meson Factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2984-2987.
[n] S. Fukumoto et al., “KEK PS Injector Linac Upgrading”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3181-3184.
[n] P.-A. Duperrex, J. E. Bachmann, M. Rohrer, and J. L. Sun, “Improvement Design of a Beam Current Monitor Based on a Passive Cavity Under Heavy Heat Load and Radiation”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 205-209. doi:10.18429/JACoW-HB2023-WEC1C1
[n] M. L. Neubauer, A. Dudas, J. Guo, R. A. Rimmer, and R. S. Williams, “High Power Co-Axial Coupler”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO17, pp. 972-974.
[n] C. Di Giulio, B. Buonomo, F. Cardelli, D. Di Giovenale, L. G. Foggetta, and D. Moriggi, “The Frascati DA?NE LINAC and the Beam Test Facility (BTF) Setups for Irradiation”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2457-2460. doi:10.18429/JACoW-IPAC2022-THPOST010
[n] Y. Tan et al., “Third order resonance correction using new Trim-S system in J-PARC MR”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1826-1829. doi:10.18429/JACoW-IPAC2025-WEPB042
[n] M. Stadler et al., “Low-Q Cavity BPM Electronics for E-XFEL, FLASH-II and SwissFEL”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPD12, pp. 670-674.
[n] R. L. Geng et al., “Preliminary Cryogenic Cold Test Results of the First 9-Cell LSF Shape Cavity”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2296-2299. doi:10.18429/JACoW-IPAC2021-TUPAB342
[n] F. Voelker, T. Henderson, and J. Johnson, “An Array of 1- to 2-GHz Electrodes for Stochastic Cooling”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2262-2264.
[n] L. Ge et al., “Integrated Accelerator Simulation with Electromagnetics and Beam Physics Codes”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 885-887. doi:10.18429/JACoW-NAPAC2019-WEPLE02
[n] R. Cee, C. M. Kleffner, M. T. Maier, U. Ratzinger, A. Schempp, and B. Schlitt, “Front-to-end Simulation of the Injector Linac for the Heidelberg Ion Beam Therapy Centre”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH017, pp. 1957-1959.
[n] D. Dunning et al., “The UK XFEL conceptual design and options analysis: mid-term update”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 400-403. doi:10.18429/JACoW-IPAC2024-MOPG55
[n] L. Antoniazzi, A. Baldo, M. G. Giacchini, and M. Montis, “PLC Integration in EPICS Environment: Comparison Between OPC Server and Direct Driver Solutions”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1767-1770. doi:10.18429/JACoW-ICALEPCS2017-THPHA155
[n] G. V. Eremeev, W. A. Clemens, K. Macha, H. Park, and R. S. Williams, “Development of Nb3Sn Cavity Vapor Diffusion Deposition System”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP071, pp. 603-606.
[n] Z. B. Sun, G. Liu, W. Liu, F. L. Shang, L. Shang, and W. B. Song, “Efficiency and Error Analysis of the HALS Injection Scheme”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 5008-5010. doi:10.18429/JACoW-IPAC2018-THPML138
For LaTeX
Use Complete Form
For BibTeX
References
- A. S. Alimov et al., “BEAM PARAMETERS MEASUREMENT OF TECHNOLOGICAL 10 MEV LINAC”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBPH11, pp. XX-XX.
- N. J. Sammut, L. Bottura, J. Micallef, and S. Sanfilippo, “The Field Description Model for the LHC Quadrupole Superconducting Magnets”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS103, pp. 2619-2621.
- T. Honda, Y. Kobayashi, C. Mitsuda, S. Nagahashi, R. Takai, and H. Takaki, “Operational Status of Photon Factory Light Sources”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 350-353.
- K. P. Wootton et al., “Synchrotron Light Monitor for the Advanced Photon Source Booster Synchrotron”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP015, pp. 358-362.
- T. Nakamura, S. Dat?®, K. Kobayashi, and T. Ohshima, “Transverse Bunch-by-bunch Feedback System for the SPring-8 Storage Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT068, pp. 2649-2651.
- V. A. Andreev et al., “Development of a Radioactive Nuclides Accelerator at the Moscow Meson Factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2984-2987.
- S. Fukumoto et al., “KEK PS Injector Linac Upgrading”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3181-3184.
- P.-A. Duperrex, J. E. Bachmann, M. Rohrer, and J. L. Sun, “Improvement Design of a Beam Current Monitor Based on a Passive Cavity Under Heavy Heat Load and Radiation”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper WEC1C1, pp. 205-209.
- M. L. Neubauer, A. Dudas, J. Guo, R. A. Rimmer, and R. S. Williams, “High Power Co-Axial Coupler”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO17, pp. 972-974.
- C. Di Giulio, B. Buonomo, F. Cardelli, D. Di Giovenale, L. G. Foggetta, and D. Moriggi, “The Frascati DA?NE LINAC and the Beam Test Facility (BTF) Setups for Irradiation”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2457-2460.
- Y. Tan et al., “Third order resonance correction using new Trim-S system in J-PARC MR”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB042, pp. 1826-1829.
- M. Stadler et al., “Low-Q Cavity BPM Electronics for E-XFEL, FLASH-II and SwissFEL”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPD12, pp. 670-674.
- R. L. Geng et al., “Preliminary Cryogenic Cold Test Results of the First 9-Cell LSF Shape Cavity”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2296-2299.
- F. Voelker, T. Henderson, and J. Johnson, “An Array of 1- to 2-GHz Electrodes for Stochastic Cooling”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2262-2264.
- L. Ge et al., “Integrated Accelerator Simulation with Electromagnetics and Beam Physics Codes”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 885-887.
- R. Cee, C. M. Kleffner, M. T. Maier, U. Ratzinger, A. Schempp, and B. Schlitt, “Front-to-end Simulation of the Injector Linac for the Heidelberg Ion Beam Therapy Centre”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH017, pp. 1957-1959.
- D. Dunning et al., “The UK XFEL conceptual design and options analysis: mid-term update”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG55, pp. 400-403.
- L. Antoniazzi, A. Baldo, M. G. Giacchini, and M. Montis, “PLC Integration in EPICS Environment: Comparison Between OPC Server and Direct Driver Solutions”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1767-1770.
- G. V. Eremeev, W. A. Clemens, K. Macha, H. Park, and R. S. Williams, “Development of Nb3Sn Cavity Vapor Diffusion Deposition System”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP071, pp. 603-606.
- Z. B. Sun, G. Liu, W. Liu, F. L. Shang, L. Shang, and W. B. Song, “Efficiency and Error Analysis of the HALS Injection Scheme”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 5008-5010.
Back to search