Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Lovelace III et al., “The Electron-Ion Collider Hadron Storage Ring 10 OÔÇÖclock Switchyard Design”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2071-2073. doi:10.18429/JACoW-IPAC2022-WEPOTK015
[n] J. J. Petillo, A. J. Dudas, and M. E. Read, “Sheet Electron Beam Gun Design Using ARGUS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 888-891.
[n] G. A. Kirby et al., “Progress in the Development of the 1-m Model of the 70 mm Aperture Quadrupole for the LHC Low-beta Insertions”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP103G, pp. 2299-2301.
[n] J.-L. Revol and R. Nagaoka, “Observation, Modelling and Cure of Transverse Instabilities at the ESRF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH112, pp. 1930-1932.
[n] J. Norem, L. Bandura, E. Black, M. A. C. Cummings, and D. Errede, “Measurements of Beam Driven Hydrodynamic Turbulence”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE026, pp. 1999-2001.
[n] K. Gubin et al., “High-power Proton Irradiated Solid State Rotating Neutron Target: Conceptual Design and Estimations of the Operation Conditions”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO036, pp. 2795-2797.
[n] C. J. Spataro, C. Amundsen, H. Bassan, and S. K. Sharma, “NSLS-II Beam Aperture Slit Vibration Studies”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 239-241. doi:10.18429/JACoW-MEDSI2016-TUPE33
[n] W. C. Turner, “Dynamic Vacuum in the Beam Tube of the SSCL Collider - Cold Beam Tube and Liner Options”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3833-3836.
[n] R. Valdiviez et al., “The Mechanical Design and Fabrication of a Ridge-Loaded Waveguide for an RFQ”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4083, pp. 597-599.
[n] S. Iwata et al., “Reduction of beam loss at the fast extraction section in J-PARC MR”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB022, unpublished.
[n] M. Yadav, O. Apsimon, C. E. Hansel, J. B. Rosenzweig, and C. P. Welsch, “Ion Motion in Flat Beam Plasma Accelerators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 521-523. doi:10.18429/JACoW-IPAC2021-MOPAB149
[n] W. F. Bergan, I. V. Bazarov, C. J. R. Duncan, and D. L. Rubin, “Applications of Dimension-Reduction to Various Accelerator Physics Problems”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4060-4062. doi:10.18429/JACoW-IPAC2019-THPRB099
[n] J. W. Staples and T. Schenkel, “High-Efficiency Matching Network for RF-Driven Ion Sources”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH014, pp. 2108-2110.
[n] T. W. Winkelmann, R. Cee, Th. Haberer, B. Naas, and A. Peters, “ION SOURCES AT HIT AND RESULTS OF TEST BENCH RUNS”, presented at the ECRIS'22, Ahmedabad, India, Oct. 2022, paper FRP2PG026, unpublished.
[n] T. H. Nicol et al., “SSR1 Cryomodule Design for PXIE”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA09, pp. 1373-1375.
[n] M. Yamamoto et al., “200 keV Polarized Electron Source for Linear Collider”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH435, pp. 680-682.
[n] P. N. Potukuchi, S. Ghosh, and K. W. Shepard, “Status of the Niobium Resonator Construction Project for the New Delhi Booster Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP122, pp. 952-954.
[n] K. V. Ettinger, J. F. B. Dealler, and F. R. Stewart, “Phase-space Volume Measurements on the Nuffield 60in Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69D07, pp. XX-XX.
[n] M. Hu et al., “Beam Profile Measurement with Flying Wires at the Fermilab Recycler Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT031, pp. 2182-2184.
[n] A. Shalnov, N. Abramenko, B. Bogdanovich, M. Karetnikov, A. Nesterovich, and A. Puchkov, “Potentialities of Electron and Ion Beam Accelerators for Long-Lived Nuclear Waste Transmutation”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPR10, pp. 1143-1145.
[n] Y. Liu et al., “Laser Ion Source Development for ISOL Systems at RIA”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE019, pp. 1640-1642.
[n] G. Brianti and P. Skarek, “A Strong Focusing Ring, as Beam Stretcher for Synchro-Cyclotrons”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper D-008, pp. XX-XX.
[n] T. Mattison et al., “Status of the SLC Damping Ring Kicker Systems”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2955-2958.
[n] J. W. Hurd, “Measurement and Resulting First-and Second-Order Approximations for a 9[degree] Bending Magnet in LAMPF's 750 keV Transport”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3637-3640.
[n] I. Reichel, “Frequency Map Studies for the ILC Damping Rings”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN116, pp. 2987-2989.
[n] R. Meng, L. Lai, Y. Zhou, J. Chen, S. Cao, and Y. Yan, “Direct RF sampling processor for cavity BPM system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4873-4875. doi:10.18429/JACoW-IPAC2023-THPL182
[n] D. L. Judd, “The Fluttering, Spiralling Flight of Cyclotron Evolution”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper O-002, pp. XX-XX.
[n] C. Settakorn, M. Hernandez, K. Woods, and H. Wiedemann, “Coherent Far-Infrared Radiation from Electron Bunches”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E103, pp. 599-601.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Lovelace III et al., “The Electron-Ion Collider Hadron Storage Ring 10 OÔÇÖclock Switchyard Design”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2071-2073.
- J. J. Petillo, A. J. Dudas, and M. E. Read, “Sheet Electron Beam Gun Design Using ARGUS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 888-891.
- G. A. Kirby et al., “Progress in the Development of the 1-m Model of the 70 mm Aperture Quadrupole for the LHC Low-beta Insertions”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP103G, pp. 2299-2301.
- J.-L. Revol and R. Nagaoka, “Observation, Modelling and Cure of Transverse Instabilities at the ESRF”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH112, pp. 1930-1932.
- J. Norem, L. Bandura, E. Black, M. A. C. Cummings, and D. Errede, “Measurements of Beam Driven Hydrodynamic Turbulence”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAE026, pp. 1999-2001.
- K. Gubin et al., “High-power Proton Irradiated Solid State Rotating Neutron Target: Conceptual Design and Estimations of the Operation Conditions”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO036, pp. 2795-2797.
- C. J. Spataro, C. Amundsen, H. Bassan, and S. K. Sharma, “NSLS-II Beam Aperture Slit Vibration Studies”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 239-241.
- W. C. Turner, “Dynamic Vacuum in the Beam Tube of the SSCL Collider - Cold Beam Tube and Liner Options”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3833-3836.
- R. Valdiviez et al., “The Mechanical Design and Fabrication of a Ridge-Loaded Waveguide for an RFQ”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4083, pp. 597-599.
- S. Iwata et al., “Reduction of beam loss at the fast extraction section in J-PARC MR”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB022, this conference.
- M. Yadav, O. Apsimon, C. E. Hansel, J. B. Rosenzweig, and C. P. Welsch, “Ion Motion in Flat Beam Plasma Accelerators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 521-523.
- W. F. Bergan, I. V. Bazarov, C. J. R. Duncan, and D. L. Rubin, “Applications of Dimension-Reduction to Various Accelerator Physics Problems”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4060-4062.
- J. W. Staples and T. Schenkel, “High-Efficiency Matching Network for RF-Driven Ion Sources”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH014, pp. 2108-2110.
- T. W. Winkelmann, R. Cee, Th. Haberer, B. Naas, and A. Peters, “ION SOURCES AT HIT AND RESULTS OF TEST BENCH RUNS”, presented at the 25th International Workshop on ECR Ion Sources (ECRIS'22), Ahmedabad, India, Oct. 2022, paper FRP2PG026, unpublished.
- T. H. Nicol et al., “SSR1 Cryomodule Design for PXIE”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA09, pp. 1373-1375.
- M. Yamamoto et al., “200 keV Polarized Electron Source for Linear Collider”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH435, pp. 680-682.
- P. N. Potukuchi, S. Ghosh, and K. W. Shepard, “Status of the Niobium Resonator Construction Project for the New Delhi Booster Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP122, pp. 952-954.
- K. V. Ettinger, J. F. B. Dealler, and F. R. Stewart, “Phase-space Volume Measurements on the Nuffield 60in Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69D07, pp. XX-XX.
- M. Hu et al., “Beam Profile Measurement with Flying Wires at the Fermilab Recycler Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT031, pp. 2182-2184.
- A. Shalnov, N. Abramenko, B. Bogdanovich, M. Karetnikov, A. Nesterovich, and A. Puchkov, “Potentialities of Electron and Ion Beam Accelerators for Long-Lived Nuclear Waste Transmutation”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPR10, pp. 1143-1145.
- Y. Liu et al., “Laser Ion Source Development for ISOL Systems at RIA”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE019, pp. 1640-1642.
- G. Brianti and P. Skarek, “A Strong Focusing Ring, as Beam Stretcher for Synchro-Cyclotrons”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper D-008, pp. XX-XX.
- T. Mattison et al., “Status of the SLC Damping Ring Kicker Systems”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2955-2958.
- J. W. Hurd, “Measurement and Resulting First-and Second-Order Approximations for a 9[degree] Bending Magnet in LAMPF's 750 keV Transport”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3637-3640.
- I. Reichel, “Frequency Map Studies for the ILC Damping Rings”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN116, pp. 2987-2989.
- R. Meng, L. Lai, Y. Zhou, J. Chen, S. Cao, and Y. Yan, “Direct RF sampling processor for cavity BPM system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL182, pp. 4873-4875.
- D. L. Judd, “The Fluttering, Spiralling Flight of Cyclotron Evolution”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper O-002, pp. XX-XX.
- C. Settakorn, M. Hernandez, K. Woods, and H. Wiedemann, “Coherent Far-Infrared Radiation from Electron Bunches”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5E103, pp. 599-601.
Back to search