Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. J. McGahern et al., “Managing System Parameters for SNS Magnets and Power Supplies”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT186, pp. 1565-1567.
[n] E. Fortescue, I. Kozsar, and V. Schramm, “Life Cycle Management and Reliability Analysis of Controls Hardware Using Operational Data From EAM”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 758-761. doi:10.18429/JACoW-ICALEPCS2023-TUPDP092
[n] W. Sch?Âllkopf et al., “The IR and THz Free Electron Laser at the Fritz-Haber-Institut”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO62, pp. 657-660.
[n] I. Terechkine, S. Cheban, T. H. Nicol, V. Poloubotko, and D. A. Sergatskov, “Feasibility of Using Conductively Cooled Magnets in Cryomodules of Superconducting Linacs”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP090, pp. 361-363.
[n] C. E. Reece, J. W. Angle, M. J. Kelley, E. M. Lechner, A. D. Palczewski, and F. A. Stevie, “Challenges to Reliable Production Nitrogen Doping of Nb for SRF Accelerating Cavities”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1311-1314. doi:10.18429/JACoW-IPAC2022-TUPOTK042
[n] T. Misu, M. Kanazawa, K. Katsuki, K. S. Sato, A. Sugiura, and S. Yamada, “Development of Co-Based Amorphous Core for Untuned Broadband RF Cavity”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT016, pp. 1511-1513.
[n] J. Jacob, O. Naumann, and W. Beinhauer, “Effects of a Harmonic Cavity at the ESRF”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP73, pp. 1647-1649.
[n] T. Lensch and M. Werner, “Synchronized Post Mortem Trigger of the PETRA III MPS”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG032, pp. 98-100.
[n] C. Cooper, G. Galasso, A. Rowe, and C. Boffo, “Optimization of BCP Processing of Elliptical NB SRF Cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP70, pp. XX-XX.
[n] M. Negrazus and A. Peters, “SAW - A Superconducting Asymmetric Multipole Wiggler at the DELTA Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP139G, pp. 2576-2578.
[n] J. P. Alexander et al., “CESRTA X-Ray Beam Size Monitor Design”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP026, pp. 3503-3504.
[n] T. Glasmacher, “The Facility for Rare Isotope Beams Project: Motivation, Status, and Technical Challenges”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper MOOHC1, unpublished.
[n] H. Euteneuer, K.-H. Kaiser, H.-J. Kreidel, U. Ludwig-Mertin, M. Negrazus, and S. Ratschow, “Three Dimensional Design of the Bending Magnets for a 1.5 GeV-Double Sided Microtron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP09A, pp. 1931-1933.
[n] M. Dehn and H. J. Kreidel, “The Control System of the Harmonic Double Sided Microtron at MAMI”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA07, pp. 331-333.
[n] P. T. Griffin-Hicks, B. Jones, B. G. Pine, C. M. Warsop, and M. Wright, “Experimental Measurements of Resonances near to the ISIS Working Point”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1132-1135. doi:10.18429/JACoW-IPAC2018-TUPAL054
[n] D. R. Smith, N. Kroll, and S. Schultz, “Photonic Band Gap Resonators for High Energy Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2559-2564.
[n] J. C. Smith, L. Gibbons, J. R. Patterson, D. L. Rubin, D. Sagan, and P. Tenenbaum, “Comparison of Beam-Based Alignment Algorithms for the ILC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP024, pp. 1847-1849.
[n] F. Marti et al., “Invited Paper: Beam Diagnostic Developments at NSCL”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-01, pp. 268-277.
[n] M. E. Jones and W. K. Peter, “Particle-in-Cell Simulations of the Lasertron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1794-1797.
[n] J. Wei et al., “FRIB Beam Power Ramp-up: Status and Plans”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 351-357. doi:10.18429/JACoW-HB2023-THC1I2
[n] P. Schweitzer, E. Bonaccorsi, L. Brarda, and N. Neufeld, “Fabric Management with Diskless Servers and Quattor on LHCb”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU005, pp. 691-693.
[n] J. A. Crittenden, D. C. Burke, Y. L. P. Fuentes, C. E. Mayes, and K. W. Smolenski, “Magnet Design for the Splitter/Combiner Regions of CBETA, the Cornell-Brookhaven Energy-Recovery-Linac Test Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 201-203. doi:10.18429/JACoW-NAPAC2016-MOPOB59
[n] J. L. Munoz and F. J. Bermejo, “Lorentz Force Detuning Simulations of Spoke Cavities With Different Stiffening Elements”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP024, pp. 946-949.
[n] V. A. Glukhikh, Yu. P. Vakhrushin, M. F. Vorogushin, and D. V. Efremov, “Applied Cyclotrons Developed and Constructed in NIIEFA”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper E-08, pp. 167-169.
[n] L. Faillace et al., “STAR High-Energy Linac status: complete installation acceptance tests”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3718-3721. doi:10.18429/JACoW-IPAC2024-THPS01
[n] G. Lambert et al., “High Harmonics from Gas, a Suitable Source for Seeding FEL from the Vacuum-ultraviolet to Soft X-ray Region”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper MOOBI2, pp. 9-15.
[n] E. Westbrook et al., “Accelerator control system software at LANSCE: vision and strategy for improvement and modernization”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3298-3300. doi:10.18429/JACoW-IPAC2024-THPG21
[n] I. N. Nesterenko, P. M. Ivanov, and A. A. Valishev, “Observation of the Dynamic Beta Effect for Various Bunch Lengths at VEPP-2M”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH138, pp. 1993-1995.
[n] M. Yamamoto et al., “Simulation of Controlled Longitudinal Emittance Blow-up in J-PARC RCS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR008, pp. 2952-2954.
[n] S. Barbanotti, W. Benecke, K. Jensch, M. Noak, and M. Schloesser, “Post-Production Dimensional Control of the Cold Masses and Vacuum Vessels for the XFEL Cryomodules”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP030, pp. 165-167.
[n] E. Chiadroni et al., “Status of Plasma-Based Experiments at the SPARC_LAB Test Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 603-606. doi:10.18429/JACoW-IPAC2018-TUXGBE3
[n] S. M. Lidia, E. P. Lee, S. M. Lund, D. Ogata, P. A. Seidl, and W. L. Waldron, “Fast Correction Optics to Reduce Chromatic Aberrations in Longitudinally Compressed Ion Beams”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP093, pp. 1513-1515.
[n] L. Ristori et al., “Development and Performance of 325 MHz Single Spoke Resonators for Project X”, in Proc. SRF'13, Paris, France, Sep. 2013, paper FRIOB02, pp. 1187-1192.
[n] A. Gallo et al., “The DAɸNE 3rd Harmonic Cavity”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH051, pp. 885-887.
[n] F. Zimmermann et al., “An RF Bunch-Length Monitor for the SLC Final Focus”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P060, pp. 2189-2191.
[n] P. Kuske, “Transverse Impedance of BESSY”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 795-798.
[n] B. Vosicki and K. Zankel, “The Sodium Curtain Beam Profile Monitor of the ISR”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1475-1479.
[n] E. Calvo-Giraldo et al., “The LHC Orbit and Trajectory System”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT08, pp. 187-189.
For LaTeX
Use Complete Form
For BibTeX
References
- W. J. McGahern et al., “Managing System Parameters for SNS Magnets and Power Supplies”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT186, pp. 1565-1567.
- E. Fortescue, I. Kozsar, and V. Schramm, “Life Cycle Management and Reliability Analysis of Controls Hardware Using Operational Data From EAM”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP092, pp. 758-761.
- W. Sch?Âllkopf et al., “The IR and THz Free Electron Laser at the Fritz-Haber-Institut”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO62, pp. 657-660.
- I. Terechkine, S. Cheban, T. H. Nicol, V. Poloubotko, and D. A. Sergatskov, “Feasibility of Using Conductively Cooled Magnets in Cryomodules of Superconducting Linacs”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP090, pp. 361-363.
- C. E. Reece, J. W. Angle, M. J. Kelley, E. M. Lechner, A. D. Palczewski, and F. A. Stevie, “Challenges to Reliable Production Nitrogen Doping of Nb for SRF Accelerating Cavities”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1311-1314.
- T. Misu, M. Kanazawa, K. Katsuki, K. S. Sato, A. Sugiura, and S. Yamada, “Development of Co-Based Amorphous Core for Untuned Broadband RF Cavity”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT016, pp. 1511-1513.
- J. Jacob, O. Naumann, and W. Beinhauer, “Effects of a Harmonic Cavity at the ESRF”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP73, pp. 1647-1649.
- T. Lensch and M. Werner, “Synchronized Post Mortem Trigger of the PETRA III MPS”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG032, pp. 98-100.
- C. Cooper, G. Galasso, A. Rowe, and C. Boffo, “Optimization of BCP Processing of Elliptical NB SRF Cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP70, pp. XX-XX.
- M. Negrazus and A. Peters, “SAW - A Superconducting Asymmetric Multipole Wiggler at the DELTA Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP139G, pp. 2576-2578.
- J. P. Alexander et al., “CESRTA X-Ray Beam Size Monitor Design”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP026, pp. 3503-3504.
- T. Glasmacher, “The Facility for Rare Isotope Beams Project: Motivation, Status, and Technical Challenges”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper MOOHC1, unpublished.
- H. Euteneuer, K.-H. Kaiser, H.-J. Kreidel, U. Ludwig-Mertin, M. Negrazus, and S. Ratschow, “Three Dimensional Design of the Bending Magnets for a 1.5 GeV-Double Sided Microtron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP09A, pp. 1931-1933.
- M. Dehn and H. J. Kreidel, “The Control System of the Harmonic Double Sided Microtron at MAMI”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA07, pp. 331-333.
- P. T. Griffin-Hicks, B. Jones, B. G. Pine, C. M. Warsop, and M. Wright, “Experimental Measurements of Resonances near to the ISIS Working Point”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1132-1135.
- D. R. Smith, N. Kroll, and S. Schultz, “Photonic Band Gap Resonators for High Energy Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2559-2564.
- J. C. Smith, L. Gibbons, J. R. Patterson, D. L. Rubin, D. Sagan, and P. Tenenbaum, “Comparison of Beam-Based Alignment Algorithms for the ILC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP024, pp. 1847-1849.
- F. Marti et al., “Invited Paper: Beam Diagnostic Developments at NSCL”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-01, pp. 268-277.
- M. E. Jones and W. K. Peter, “Particle-in-Cell Simulations of the Lasertron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1794-1797.
- J. Wei et al., “FRIB Beam Power Ramp-up: Status and Plans”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THC1I2, pp. 351-357.
- P. Schweitzer, E. Bonaccorsi, L. Brarda, and N. Neufeld, “Fabric Management with Diskless Servers and Quattor on LHCb”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMMU005, pp. 691-693.
- J. A. Crittenden, D. C. Burke, Y. L. P. Fuentes, C. E. Mayes, and K. W. Smolenski, “Magnet Design for the Splitter/Combiner Regions of CBETA, the Cornell-Brookhaven Energy-Recovery-Linac Test Accelerator”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 201-203.
- J. L. Munoz and F. J. Bermejo, “Lorentz Force Detuning Simulations of Spoke Cavities With Different Stiffening Elements”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP024, pp. 946-949.
- V. A. Glukhikh, Yu. P. Vakhrushin, M. F. Vorogushin, and D. V. Efremov, “Applied Cyclotrons Developed and Constructed in NIIEFA”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper E-08, pp. 167-169.
- L. Faillace et al., “STAR High-Energy Linac status: complete installation acceptance tests”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS01, pp. 3718-3721.
- G. Lambert et al., “High Harmonics from Gas, a Suitable Source for Seeding FEL from the Vacuum-ultraviolet to Soft X-ray Region”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper MOOBI2, pp. 9-15.
- E. Westbrook et al., “Accelerator control system software at LANSCE: vision and strategy for improvement and modernization”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG21, pp. 3298-3300.
- I. N. Nesterenko, P. M. Ivanov, and A. A. Valishev, “Observation of the Dynamic Beta Effect for Various Bunch Lengths at VEPP-2M”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH138, pp. 1993-1995.
- M. Yamamoto et al., “Simulation of Controlled Longitudinal Emittance Blow-up in J-PARC RCS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR008, pp. 2952-2954.
- S. Barbanotti, W. Benecke, K. Jensch, M. Noak, and M. Schloesser, “Post-Production Dimensional Control of the Cold Masses and Vacuum Vessels for the XFEL Cryomodules”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP030, pp. 165-167.
- E. Chiadroni et al., “Status of Plasma-Based Experiments at the SPARC_LAB Test Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 603-606.
- S. M. Lidia, E. P. Lee, S. M. Lund, D. Ogata, P. A. Seidl, and W. L. Waldron, “Fast Correction Optics to Reduce Chromatic Aberrations in Longitudinally Compressed Ion Beams”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP093, pp. 1513-1515.
- L. Ristori et al., “Development and Performance of 325 MHz Single Spoke Resonators for Project X”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper FRIOB02, pp. 1187-1192.
- A. Gallo et al., “The DAɸNE 3rd Harmonic Cavity”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH051, pp. 885-887.
- F. Zimmermann et al., “An RF Bunch-Length Monitor for the SLC Final Focus”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P060, pp. 2189-2191.
- P. Kuske, “Transverse Impedance of BESSY”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 795-798.
- B. Vosicki and K. Zankel, “The Sodium Curtain Beam Profile Monitor of the ISR”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1475-1479.
- E. Calvo-Giraldo et al., “The LHC Orbit and Trajectory System”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT08, pp. 187-189.
Back to search