Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M.-S. Chiu, Y.-S. Cheng, C. P. Felix, G.-H. Luo, H.-J. Tsai, and F. H. Tseng, “Simulation Study of Orbit Correction by Neural Network in Taiwan Photon Source”, in Proc. FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, pp. 188-191. doi:10.18429/JACoW-FLS2023-WE4P19
[n] C. H. Rivetta, J. D. Fox, T. Mastorides, D. Teytelman, and D. Van Winkle, “Modeling and Simulation of Longitudinal Dynamics for LER-HER PEP II Rings”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH101, pp. 3032-3034.
[n] J. Tang et al., “The Role of Laser Shaping in Microbunching Instability Suppression and Seeded X-Ray Free Electron Emission”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 990-992. doi:10.18429/JACoW-NAPAC2019-FRXBA5
[n] M. Modena, H. Hsieh, and C. Sanelli, “High Current Density Septum Prototype for Accumulator and Storage Rings of DAPhiNE, the Frascati Phi-Factory”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2403-2406.
[n] M. E. Biagini et al., “New Low Emittance Lattices for the SuperB Accelerator Project”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP040, pp. 2608-2610.
[n] R. P. Johnson, “Ionization Cooling”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper TUM2I04, pp. 68-72.
[n] N. Tsoupas et al., “Design of Beam Transfer Lines for the NSLS II”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS102, pp. 664-666.
[n] D. Stout et al., “Installation of the Spallation Neutron Source (SNS) Superconducting Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT071, pp. 3838-3840.
[n] P. J. Chou, H.-P. Chang, C.-C. Kuo, and W. T. Liu, “Design Status of Transfer Lines in TPS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP002, pp. 2261-2263.
[n] L. T. Jackson, A. H. Saab, and D. W. Shimer, “PEP-II Magnet Power Conversion Systems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPP01, pp. 1961-1963.
[n] Yu. S. Ivanov, S. K. Esin, L. L. Filipchicov, V. A. Konovalov, B. P. Murin, and Y. Senichev, “Automated Control System Structure of the USSR Academy of Sciences Kaon Facility”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 352-355. doi:10.18429/JACoW-ICALEPCS1991-S10TS03
[n] O. Mohsen, M. Borland, and Y. Sun, “Machine learning-enhanced infrared imaging for temperature anomaly detection in power supplies”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM103, unpublished.
[n] M. Mapes and N. Tsoupas, “Design of an Ultra High Vacuum Compatible Copper Septum Magnet”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB047, pp. 2141-2143.
[n] T. Higo et al., “Fabrication Process of Rounded Damped Detuned Structure”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA01, pp. 371-373.
[n] S. Kashiwagi et al., “Beam Loading Compensation Using Phase to Amplitude Modulation Method in ATF”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4019, pp. 91-93.
[n] E. Allaria et al., “First Lasing of a Free Electron Laser in the Soft X-Ray Spectral Range with Echo Enabled Harmonic Generation”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 7-10. doi:10.18429/JACoW-FEL2019-MOA02
[n] I. Reyzl, “Simulation of Feedback for Orbit Correction”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP043L, pp. 1887-1889.
[n] C. Zhang and H. Podlech, “Efficient Heavy Ion Acceleration with High Brilliance”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 83-86. doi:10.18429/JACoW-HIAT2022-TUP07
[n] B. Sinha, D. K. Bose, C. Mallik, P. Y. Nabhiraj, G. Pal, and G. S. Taki, “The Electron Cyclotron Resonance Ion Source at Variable Energy Cyclotron Centre, Calcutta”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-11, pp. 408-411.
[n] G. H. Mackenzie, “Injection into a High-Intensity Synchrotron from a Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper D-02, pp. 84-87.
[n] A. Angelovski et al., “Realization of a High Bandwidth Bunch Arrival-time Monitor with Cone-shaped Pickup Electrodes for FLASH and XFEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC076, pp. 1177-1179.
[n] Y. Huang, “Simulation of the Emittance of the RF Gun Including the Schottky Effect”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP84, pp. 872-874.
[n] W. Liu, E. Wang, O. Rahman, and J. Skaritka, “The high voltage DC gun design progress for EIC strong hadron cooling”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA130, unpublished.
[n] A. Loulergue, A. Nadji, and J. Payet, “Estimation of Vertical Dispersion and Betatron Coupling for SOLEIL”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP08G, pp. 906-908.
[n] J. R. Chen, T. C. Fan, C. S. Hwang, H. H. Chen, F. Y. Lin, and C. H. Chang, “PERFORMANCE OF A PROTOTYPE VARIABLE ELLIPTICAL LY POLARIZED UNDULATOR”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP017, pp. XX-XX.
[n] J. Pfingstner and E. Adli, “Performance and Tolerance Studies of the X-Ray Production for the X-Band FEL Collaboration”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 359-362. doi:10.18429/JACoW-FEL2015-TUP011
[n] S. Y. Lee, “A High Betatron Amplitude Insertion for the SSCMEB Lattice”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 694-696.
[n] J.-S. Oh and H. Matsumoto, “R&D of the Long-Life Thyratron Tube”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP025, pp. 622-624.
[n] A. S. Johnson, H. T. Edwards, A. H. Lumpkin, J. Ruan, J. K. Santucci, and R. M. Thurman-Keup, “Near-ideal Emittance Exchange at the Fermilab Photoinjector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP024, pp. 1543-1545.
[n] Th. Doerk, H. Euteneuer, and K. H. Kaiser, “Methods for High-Precision Beam Energy Monitoring at the Mainz Microtron MAMI”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP065G, pp. 1405-1407.
[n] D. Keefe, “Linear Induction Accelerator for Heavy Ions”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper E06, pp. 272-275.
[n] I. Gorgisyan et al., “Fast, Fully Automated Continuous Energy Scan at the Biomax Beamline at Max IV Laboratory”, presented at the ICALEPCS'23, Cape Town, South Africa, Oct. 2023, paper THPDP054, unpublished.
[n] A. J. Gonzalez and A. S. Plastun, “RF Chopper for Prebunched Radioactive Ion Beams”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 87-89. doi:10.18429/JACoW-HIAT2022-TUP08
[n] P. S. Papadopoulou, F. Antoniou, and Y. Papaphilippou, “Alternative Optics Design of the CLIC Damping Rings with Variable Dipole Bends and High-field Wigglers”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2046-2049. doi:10.18429/JACoW-IPAC2015-TUPTY022
For LaTeX
Use Complete Form
For BibTeX
References
- M.-S. Chiu, Y.-S. Cheng, C. P. Felix, G.-H. Luo, H.-J. Tsai, and F. H. Tseng, “Simulation Study of Orbit Correction by Neural Network in Taiwan Photon Source”, in Proc. 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper WE4P19, pp. 188-191.
- C. H. Rivetta, J. D. Fox, T. Mastorides, D. Teytelman, and D. Van Winkle, “Modeling and Simulation of Longitudinal Dynamics for LER-HER PEP II Rings”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH101, pp. 3032-3034.
- J. Tang et al., “The Role of Laser Shaping in Microbunching Instability Suppression and Seeded X-Ray Free Electron Emission”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 990-992.
- M. Modena, H. Hsieh, and C. Sanelli, “High Current Density Septum Prototype for Accumulator and Storage Rings of DAPhiNE, the Frascati Phi-Factory”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2403-2406.
- M. E. Biagini et al., “New Low Emittance Lattices for the SuperB Accelerator Project”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP040, pp. 2608-2610.
- R. P. Johnson, “Ionization Cooling”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper TUM2I04, pp. 68-72.
- N. Tsoupas et al., “Design of Beam Transfer Lines for the NSLS II”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS102, pp. 664-666.
- D. Stout et al., “Installation of the Spallation Neutron Source (SNS) Superconducting Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT071, pp. 3838-3840.
- P. J. Chou, H.-P. Chang, C.-C. Kuo, and W. T. Liu, “Design Status of Transfer Lines in TPS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP002, pp. 2261-2263.
- L. T. Jackson, A. H. Saab, and D. W. Shimer, “PEP-II Magnet Power Conversion Systems”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPP01, pp. 1961-1963.
- Yu. S. Ivanov, S. K. Esin, L. L. Filipchicov, V. A. Konovalov, B. P. Murin, and Y. Senichev, “Automated Control System Structure of the USSR Academy of Sciences Kaon Facility”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S10TS03, pp. 352-355.
- O. Mohsen, M. Borland, and Y. Sun, “Machine learning-enhanced infrared imaging for temperature anomaly detection in power supplies”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM103, this conference.
- M. Mapes and N. Tsoupas, “Design of an Ultra High Vacuum Compatible Copper Septum Magnet”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB047, pp. 2141-2143.
- T. Higo et al., “Fabrication Process of Rounded Damped Detuned Structure”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUA01, pp. 371-373.
- S. Kashiwagi et al., “Beam Loading Compensation Using Phase to Amplitude Modulation Method in ATF”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4019, pp. 91-93.
- E. Allaria et al., “First Lasing of a Free Electron Laser in the Soft X-Ray Spectral Range with Echo Enabled Harmonic Generation”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 7-10.
- I. Reyzl, “Simulation of Feedback for Orbit Correction”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP043L, pp. 1887-1889.
- C. Zhang and H. Podlech, “Efficient Heavy Ion Acceleration with High Brilliance”, in Proc. 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, pp. 83-86.
- B. Sinha, D. K. Bose, C. Mallik, P. Y. Nabhiraj, G. Pal, and G. S. Taki, “The Electron Cyclotron Resonance Ion Source at Variable Energy Cyclotron Centre, Calcutta”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper G-11, pp. 408-411.
- G. H. Mackenzie, “Injection into a High-Intensity Synchrotron from a Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper D-02, pp. 84-87.
- A. Angelovski et al., “Realization of a High Bandwidth Bunch Arrival-time Monitor with Cone-shaped Pickup Electrodes for FLASH and XFEL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC076, pp. 1177-1179.
- Y. Huang, “Simulation of the Emittance of the RF Gun Including the Schottky Effect”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP84, pp. 872-874.
- W. Liu, E. Wang, O. Rahman, and J. Skaritka, “The high voltage DC gun design progress for EIC strong hadron cooling”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA130, unpublished.
- A. Loulergue, A. Nadji, and J. Payet, “Estimation of Vertical Dispersion and Betatron Coupling for SOLEIL”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP08G, pp. 906-908.
- J. R. Chen, T. C. Fan, C. S. Hwang, H. H. Chen, F. Y. Lin, and C. H. Chang, “PERFORMANCE OF A PROTOTYPE VARIABLE ELLIPTICAL LY POLARIZED UNDULATOR”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP017, pp. XX-XX.
- J. Pfingstner and E. Adli, “Performance and Tolerance Studies of the X-Ray Production for the X-Band FEL Collaboration”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 359-362.
- S. Y. Lee, “A High Betatron Amplitude Insertion for the SSCMEB Lattice”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 694-696.
- J.-S. Oh and H. Matsumoto, “R&D of the Long-Life Thyratron Tube”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP025, pp. 622-624.
- A. S. Johnson, H. T. Edwards, A. H. Lumpkin, J. Ruan, J. K. Santucci, and R. M. Thurman-Keup, “Near-ideal Emittance Exchange at the Fermilab Photoinjector”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP024, pp. 1543-1545.
- Th. Doerk, H. Euteneuer, and K. H. Kaiser, “Methods for High-Precision Beam Energy Monitoring at the Mainz Microtron MAMI”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP065G, pp. 1405-1407.
- D. Keefe, “Linear Induction Accelerator for Heavy Ions”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper E06, pp. 272-275.
- I. Gorgisyan et al., “Fast, Fully Automated Continuous Energy Scan at the Biomax Beamline at Max IV Laboratory”, presented at the 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP054, unpublished.
- A. J. Gonzalez and A. S. Plastun, “RF Chopper for Prebunched Radioactive Ion Beams”, in Proc. 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, pp. 87-89.
- P. S. Papadopoulou, F. Antoniou, and Y. Papaphilippou, “Alternative Optics Design of the CLIC Damping Rings with Variable Dipole Bends and High-field Wigglers”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2046-2049.
Back to search