Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Favourites
For Word
[n] Z. Insepov, A. Hassanein, and D. Swenson, “Computer Simulation of Surface Modification with Ion Beams”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP51, pp. 363-365.
[n] Y. Iwashita, H. Tongu, H. Hayano, T. Saeki, and K. Watanabe, “Updates on R&D of Nondestructive Inspection Systems for SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO032, pp. 447-449.
[n] L. Kang et al., “Key Technologies for Remote Detection of CSNS Radiation Environment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2584-2586. doi:10.18429/JACoW-IPAC2019-WEPGW046
[n] W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0035, pp. 424-426.
[n] X. J. Nie et al., “Structure Design of a Multi-Wire Target”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 92-94. doi:10.18429/JACoW-MEDSI2018-TUPH27
[n] L. M. Bollinger et al., “First Operational Tests of the Positive-Ion Injector for ATLAS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1120-1123.
[n] G. Ganetis et al., “Misalignment Evaluation of Superconducting Magnets in the Relativistic Heavy Ion Collider”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP007G, pp. 2222-2224.
[n] E. Demmel and W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3432-3435.
[n] J. X. Chen, L. Kang, and J. B. Yu, “Research of the Chinese Spallation Neutron Source Stripper Foil”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4562-4564. doi:10.18429/JACoW-IPAC2017-THPVA054
[n] J. P. Wozniak, S. Deghaye, and G. Kruk, “New Wave of Component Reuse with Spring Framework - AP Case Study”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA004, pp. 367-369.
[n] K. M. Terwilliger et al., “Acceleration of Polarized Protons in the Brookhaven AGS”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2031-2034.
[n] J. Lundquist, F. Curbis, G. Goetzke, E. Mansten, and S. Werin, “FEL Power Profile Predictions with Image-Based Machine Learning at FLASH”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6014, unpublished.
[n] A. Schempp, B. Hofmann, and L. Brendel, “Design of A 352 MHz-Proton-RFQ for GSI”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP11, pp. 620-622.
[n] Y. Yang, A. Nassiri, T. L. Smith, G. J. Waldschmidt, G. Wu, and H. Wang, “Mode Damping Measurement for the APS Deflecting Cavity”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC02, pp. 787-789.
[n] W. Merz, C. Ankenbrandt, and K. Koepke, “Transition Jump System for the Fermilab Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1343-1346.
[n] A. V. Zlobin and I. Novitski, “Development and Comparison of Mechanical Structures for FNAL 15 T Nb3Sn Dipole Demonstrator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 137-139. doi:10.18429/JACoW-NAPAC2016-MOPOB30
[n] J. Bywater, T. Khoe, R. Lari, C. Potts, W. Praeg, and L. Ratner, “A Pulsed Quadrupole System for Preventing Depolarization”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 869-872.
[n] G. Y. Wang, L. Kang, J. B. Yu, J. S. Zhang, and J. X. Chen, “DESIGN OF A LAYERED HIGH PRECISION MAGNET GIRDER”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 277-279. doi:10.18429/JACoW-MEDSI2018-WEPH32
[n] A. S. Plastun, Z. A. Conway, B. Mustapha, and P. N. Ostroumov, “Design of the Room-Temperature Front-End for a Multi-Ion Linac Injector”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 73-75. doi:10.18429/JACoW-NAPAC2016-MOB4CO04
[n] Y. I. Alexahin, “Design of Muon Collider Lattices”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 69-72. doi:10.18429/JACoW-NAPAC2016-MOB4CO03
For LaTeX
Use Complete Form
For BibTeX
References
- Z. Insepov, A. Hassanein, and D. Swenson, “Computer Simulation of Surface Modification with Ion Beams”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP51, pp. 363-365.
- Y. Iwashita, H. Tongu, H. Hayano, T. Saeki, and K. Watanabe, “Updates on R&D of Nondestructive Inspection Systems for SRF Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO032, pp. 447-449.
- L. Kang et al., “Key Technologies for Remote Detection of CSNS Radiation Environment”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2584-2586.
- W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0035, pp. 424-426.
- X. J. Nie et al., “Structure Design of a Multi-Wire Target”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 92-94.
- L. M. Bollinger et al., “First Operational Tests of the Positive-Ion Injector for ATLAS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1120-1123.
- G. Ganetis et al., “Misalignment Evaluation of Superconducting Magnets in the Relativistic Heavy Ion Collider”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP007G, pp. 2222-2224.
- E. Demmel and W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3432-3435.
- J. X. Chen, L. Kang, and J. B. Yu, “Research of the Chinese Spallation Neutron Source Stripper Foil”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4562-4564.
- J. P. Wozniak, S. Deghaye, and G. Kruk, “New Wave of Component Reuse with Spring Framework - AP Case Study”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEA004, pp. 367-369.
- K. M. Terwilliger et al., “Acceleration of Polarized Protons in the Brookhaven AGS”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2031-2034.
- J. Lundquist, F. Curbis, G. Goetzke, E. Mansten, and S. Werin, “FEL Power Profile Predictions with Image-Based Machine Learning at FLASH”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP6014, this conference.
- A. Schempp, B. Hofmann, and L. Brendel, “Design of A 352 MHz-Proton-RFQ for GSI”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP11, pp. 620-622.
- Y. Yang, A. Nassiri, T. L. Smith, G. J. Waldschmidt, G. Wu, and H. Wang, “Mode Damping Measurement for the APS Deflecting Cavity”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC02, pp. 787-789.
- W. Merz, C. Ankenbrandt, and K. Koepke, “Transition Jump System for the Fermilab Booster”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1343-1346.
- A. V. Zlobin and I. Novitski, “Development and Comparison of Mechanical Structures for FNAL 15 T Nb3Sn Dipole Demonstrator”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 137-139.
- J. Bywater, T. Khoe, R. Lari, C. Potts, W. Praeg, and L. Ratner, “A Pulsed Quadrupole System for Preventing Depolarization”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 869-872.
- G. Y. Wang, L. Kang, J. B. Yu, J. S. Zhang, and J. X. Chen, “DESIGN OF A LAYERED HIGH PRECISION MAGNET GIRDER”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 277-279.
- A. S. Plastun, Z. A. Conway, B. Mustapha, and P. N. Ostroumov, “Design of the Room-Temperature Front-End for a Multi-Ion Linac Injector”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 73-75.
- Y. I. Alexahin, “Design of Muon Collider Lattices”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 69-72.
Back to search