Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Kuhn, J. Bahrdt, A. Gaupp, M. Scheer, and B. Schulz, “Developing of Advanced Magnet Structures for Cryogenic in Vacuum Permanent Magnet Undulators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2004-2006. doi:10.18429/JACoW-IPAC2014-WEPRO029
[n] G. P?Âplau and C. Potratz, “A Python Poisson Solver for 3D Space Charge Computations in Structures with Arbitrary Shaped Boundaries”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 406-408. doi:10.18429/JACoW-IPAC2014-MOPME013
[n] O. A. Shevchenko, A. V. Kuzmin, and N. A. Vinokurov, “NUMERICAL MODELING OF THE NOVOSIBIRSK TERAHERTZ FEL AND COMPARISON WITH EXPERIMENTAL RESULTS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUDP06, pp. XX-XX.
[n] A. Schaelicke, P. Goslawski, M. Ries, and M. Ruprecht, “Status and Performance of Bunch-by-bunch Feedback at BESSY II and MLS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1733-1735. doi:10.18429/JACoW-IPAC2014-TUPRI072
[n] P. O. Schmid, D. B. Engel, J. Feikes, M. Ries, and G. Wuestefeld, “Mitigating the Pertubations Caused by U 180 at the Metrology Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC012, pp. 2930-2932.
[n] M. Paraliev et al., “Commissioning and Stability Studies of the SwissFEL Bunch-Separation System”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 404-407. doi:10.18429/JACoW-FEL2019-WEP038
[n] J. Bahrdt et al., “Measurements of the Lattice Modifications for the Cryogenic Undulator CPMU17”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4031-4034. doi:10.18429/JACoW-IPAC2016-THPOW039
[n] M. Ries et al., “Transverse Resonance Island Buckets at the MLS and BESSY II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 138-140. doi:10.18429/JACoW-IPAC2015-MOPWA021
[n] J. Bahrdt and G. Wuestefeld, “Symplectic Tracking and Compensation of Dynamic Field Integrals in Complex Undulator Structures”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper FRXAB01, pp. 4165-4169.
[n] J. Bahrdt et al., “A Canted Double Undulator System With a Wide Energy Range for EMIL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1442-1444. doi:10.18429/JACoW-IPAC2015-TUPWA019
[n] H. Ghasem and G.-H. Luo, “Short X-ray Pulse Generation in Taiwan Photon Source Using Deflecting Cavity”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC017, pp. 2025-2027.
[n] R. E. Rydenko, G. I. Ayzenshtat, and O. P. Tolbanov, “The use of betatron gamma-beam for digital radiographic technique”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MOLP17, pp. XX-XX.
[n] G. Kulipanov et al., “Compact Hard X-Ray Synchrotron Radiation Source with Superconducting Bending Magnets”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA018, pp. 127-129.
[n] H. Hseuh et al., “Improvement of RHIC Warm Beam Vacuum for High Intensity Operation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE021, pp. 785-787.
[n] E. Chiaveri, J. T??ckmantel, M. Brune, P. Goy, and J. M. Raimond, “Realisation and Tuning of Superconducting Closed Cavities at a Given Millimeter Wavelength”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87C05, pp. XX-XX.
[n] J. Bahrdt, W. Frentrup, A. Gaupp, M. Scheer, I. Schneider, and G. Wuestefeld, “Shimming of the Dynamic Field Integrals of the BESSY II U125 Hybrid Undulator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC154, pp. 3248-3250.
[n] S. Dordevic, M. Aiba, and M. Paraliev, “Design and operation of SLS2 thin septum”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7131, unpublished.
[n] D. Astapovych et al., “Investigation of Beam Impedance and Heat Load in a High Temperature Superconducting Undulator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2089-2092. doi:10.18429/JACoW-IPAC2021-TUPAB267
[n] H. Kobayashi, Y. Miyahara, S. Sasaki, T. Shimada, M. Takao, and A. Yokoya, “Design of Variable Polarizing Undulator APPLE-type for SX Beamline in the SPring-8”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP113G, pp. 2579-2584.
[n] B. Krasch, F. Abusaif, A. Grau, N. Glamann, R. Nast, and D. Saez de Jauregui, “Design study of a compact superconducting undulator based on laser-structured HTS tapes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3781-3784. doi:10.18429/JACoW-IPAC2024-THPS22
[n] M. H. R. Donald, M. R. Harold, J. Maidment, and G. H. Rees, “Chromaticity Correction in EPIC”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1433-1435.
[n] E. Huttel, I. Birkel, A.-S. M??ller, and P. Wesolowski, “Low Beta Structure for the ANKA Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC024, pp. 2034-2036.
[n] R. A. Krempaská, A. D. Alarcon, S. Dordevic, C. H. Gough, M. Paraliev, and W. Portmann, “SwissFEL Resonant Kicker Control System”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 813-816. doi:10.18429/JACoW-ICALEPCS2023-TUPDP106
[n] J. Bahrdt et al., “In-Vacuum APPLE II Undulator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4114-4116. doi:10.18429/JACoW-IPAC2018-THPMF031
[n] C. Krantz et al., “Operational tests of CRYRING@ESR without electron cooler solenoid compensation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2387-2390. doi:10.18429/JACoW-IPAC2023-TUPM079
[n] T. J. Houlahan, I. Haehnlein, W. M. Huber, B. E. Jurczyk, I. A. Shchelkanov, and R. A. Stubbers, “High-Quality, Conformal Bellows Coatings Using Ultra-Fast HiPIMS with Precision Ion Energy Control”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3626-3629. doi:10.18429/JACoW-IPAC2021-WEPAB390
[n] H.-C. Hseuh, M. Mapes, L. Smart, R. J. Todd, and D. Weiss, “Upgrade of RHIC Vacuum Systems for High Luminosity Operation”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE047, pp. 2977-2979.
[n] A. Citterio, P. Braschoss IV, M. Dehler, S. Dordevic, D. Stephan, and L. Stingelin, “Machine impedance calculation and impedance optimization of vacuum components in SLS 2.0”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1011-1014. doi:10.18429/JACoW-IPAC2023-MOPM016
[n] F. Abusaif et al., “Optimization studies on accelerator sample components for energy management purposes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2887-2890. doi:10.18429/JACoW-IPAC2024-WEPS79
[n] M. Paraliev, M. Aiba, S. Dordevic, C. H. Gough, and A. Streun, “Development of Fast and Super-Fast Kicker System for SLS 2.0 Injection”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2889-2892. doi:10.18429/JACoW-IPAC2021-WEPAB122
[n] J. Gethmann et al., “Prospects for photon science and beam dynamics studies of a THz undulator at FLUTE”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2046-2048. doi:10.18429/JACoW-IPAC2023-TUPL134
[n] J. Yang, K. Kan, T. Kondoh, A. Yoshida, and Y. Yoshida, “Femtosecond Single-bunch Electron Linear Accelerator Based on a Photocathode RF Gun”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS058, pp. 2514-2516.
[n] A. Bernhard et al., “Overview of the superconducting accelerator magnet system developments at the Karlsruhe Institute of Technology”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPS77, unpublished.
[n] E. L. Atkinson, T. J. Houlahan, B. E. Jurczyk, and R. A. Stubbers, “Modular Solid-State Switching and Arc Suppression for Vacuum Tube Bias Circuits”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 179-181. doi:10.18429/JACoW-NAPAC2022-MOPA61
For LaTeX
Use Complete Form
For BibTeX
References
- C. Kuhn, J. Bahrdt, A. Gaupp, M. Scheer, and B. Schulz, “Developing of Advanced Magnet Structures for Cryogenic in Vacuum Permanent Magnet Undulators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2004-2006.
- G. P?Âplau and C. Potratz, “A Python Poisson Solver for 3D Space Charge Computations in Structures with Arbitrary Shaped Boundaries”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 406-408.
- O. A. Shevchenko, A. V. Kuzmin, and N. A. Vinokurov, “NUMERICAL MODELING OF THE NOVOSIBIRSK TERAHERTZ FEL AND COMPARISON WITH EXPERIMENTAL RESULTS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUDP06, pp. XX-XX.
- A. Schaelicke, P. Goslawski, M. Ries, and M. Ruprecht, “Status and Performance of Bunch-by-bunch Feedback at BESSY II and MLS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1733-1735.
- P. O. Schmid, D. B. Engel, J. Feikes, M. Ries, and G. Wuestefeld, “Mitigating the Pertubations Caused by U 180 at the Metrology Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC012, pp. 2930-2932.
- M. Paraliev et al., “Commissioning and Stability Studies of the SwissFEL Bunch-Separation System”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 404-407.
- J. Bahrdt et al., “Measurements of the Lattice Modifications for the Cryogenic Undulator CPMU17”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4031-4034.
- M. Ries et al., “Transverse Resonance Island Buckets at the MLS and BESSY II”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 138-140.
- J. Bahrdt and G. Wuestefeld, “Symplectic Tracking and Compensation of Dynamic Field Integrals in Complex Undulator Structures”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper FRXAB01, pp. 4165-4169.
- J. Bahrdt et al., “A Canted Double Undulator System With a Wide Energy Range for EMIL”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1442-1444.
- H. Ghasem and G.-H. Luo, “Short X-ray Pulse Generation in Taiwan Photon Source Using Deflecting Cavity”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC017, pp. 2025-2027.
- R. E. Rydenko, G. I. Ayzenshtat, and O. P. Tolbanov, “The use of betatron gamma-beam for digital radiographic technique”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MOLP17, pp. XX-XX.
- G. Kulipanov et al., “Compact Hard X-Ray Synchrotron Radiation Source with Superconducting Bending Magnets”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA018, pp. 127-129.
- H. Hseuh et al., “Improvement of RHIC Warm Beam Vacuum for High Intensity Operation”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPE021, pp. 785-787.
- E. Chiaveri, J. T??ckmantel, M. Brune, P. Goy, and J. M. Raimond, “Realisation and Tuning of Superconducting Closed Cavities at a Given Millimeter Wavelength”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87C05, pp. XX-XX.
- J. Bahrdt, W. Frentrup, A. Gaupp, M. Scheer, I. Schneider, and G. Wuestefeld, “Shimming of the Dynamic Field Integrals of the BESSY II U125 Hybrid Undulator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC154, pp. 3248-3250.
- S. Dordevic, M. Aiba, and M. Paraliev, “Design and operation of SLS2 thin septum”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7131, this conference.
- D. Astapovych et al., “Investigation of Beam Impedance and Heat Load in a High Temperature Superconducting Undulator”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2089-2092.
- H. Kobayashi, Y. Miyahara, S. Sasaki, T. Shimada, M. Takao, and A. Yokoya, “Design of Variable Polarizing Undulator APPLE-type for SX Beamline in the SPring-8”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP113G, pp. 2579-2584.
- B. Krasch, F. Abusaif, A. Grau, N. Glamann, R. Nast, and D. Saez de Jauregui, “Design study of a compact superconducting undulator based on laser-structured HTS tapes”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS22, pp. 3781-3784.
- M. H. R. Donald, M. R. Harold, J. Maidment, and G. H. Rees, “Chromaticity Correction in EPIC”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1433-1435.
- E. Huttel, I. Birkel, A.-S. M??ller, and P. Wesolowski, “Low Beta Structure for the ANKA Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC024, pp. 2034-2036.
- R. A. Krempaská, A. D. Alarcon, S. Dordevic, C. H. Gough, M. Paraliev, and W. Portmann, “SwissFEL Resonant Kicker Control System”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP106, pp. 813-816.
- J. Bahrdt et al., “In-Vacuum APPLE II Undulator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4114-4116.
- C. Krantz et al., “Operational tests of CRYRING@ESR without electron cooler solenoid compensation”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM079, pp. 2387-2390.
- T. J. Houlahan, I. Haehnlein, W. M. Huber, B. E. Jurczyk, I. A. Shchelkanov, and R. A. Stubbers, “High-Quality, Conformal Bellows Coatings Using Ultra-Fast HiPIMS with Precision Ion Energy Control”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3626-3629.
- H.-C. Hseuh, M. Mapes, L. Smart, R. J. Todd, and D. Weiss, “Upgrade of RHIC Vacuum Systems for High Luminosity Operation”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE047, pp. 2977-2979.
- A. Citterio, P. Braschoss IV, M. Dehler, S. Dordevic, D. Stephan, and L. Stingelin, “Machine impedance calculation and impedance optimization of vacuum components in SLS 2.0”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM016, pp. 1011-1014.
- F. Abusaif et al., “Optimization studies on accelerator sample components for energy management purposes”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS79, pp. 2887-2890.
- M. Paraliev, M. Aiba, S. Dordevic, C. H. Gough, and A. Streun, “Development of Fast and Super-Fast Kicker System for SLS 2.0 Injection”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2889-2892.
- J. Gethmann et al., “Prospects for photon science and beam dynamics studies of a THz undulator at FLUTE”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL134, pp. 2046-2048.
- J. Yang, K. Kan, T. Kondoh, A. Yoshida, and Y. Yoshida, “Femtosecond Single-bunch Electron Linear Accelerator Based on a Photocathode RF Gun”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS058, pp. 2514-2516.
- A. Bernhard et al., “Overview of the superconducting accelerator magnet system developments at the Karlsruhe Institute of Technology”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS77, unpublished.
- E. L. Atkinson, T. J. Houlahan, B. E. Jurczyk, and R. A. Stubbers, “Modular Solid-State Switching and Arc Suppression for Vacuum Tube Bias Circuits”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 179-181.
Back to search