Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Simon, C. Benjamin, J. Bradley, and R. Valizadeh, “Impact of ion and neutral angular distribution on thin film deposition in HiPIMS and bipolar HiPIMS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB073, unpublished.
[n] K. Nakajima, T. Kageyama, and A. Ogata, “Variation of Longitudinal Beam Position and Profile During Acceleration in Tristan Main Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 570-573.
[n] R. L. Kustom, S. A. Martin, P. F. Meads, G. Wuestefeld, and E. Zaplatin, “The FFAG as an Accelerator for High Intensity Proton Beams”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 574-577.
[n] B. Comiskey et al., “Progress toward dual-pulse operation at the Proton Storage Ring of LANSCE”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 558-562. doi:10.18429/JACoW-NAPAC2025-TUP081
[n] V. V. Oreshonok, V. V. Kolmogorov, and A. N. Karpushov, “Control System for the 1 MW Neutral Beam Injector”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 712-714. doi:10.18429/JACoW-RUPAC2016-THPSC077
[n] S. A. Kheifets and S. A. Heifets, “Radiation of a Charge in a Perfectly Conducting Cylindrical Pipe with a Jump in its Cross Section”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-24, pp. 493-495.
[n] F. Stulle et al., “Beam Loss and Average Beam Current Measurements Using a CWCT”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 882-885. doi:10.18429/JACoW-LINAC2018-THPO086
[n] A. Novokhatski, S. A. Heifets, and D. Teytelman, “High Current Effects in the PEP-II SLAC B-factory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS077, pp. 4225-4227.
[n] S. Atieh et al., “Welding and Quality Control for the Consolidation of the LHC Superconducting Magnets and Circuits”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2709-2711. doi:10.18429/JACoW-IPAC2014-WEPRI093
[n] R. J. Loewen, A. Menegat, A. E. Vlieks, J. W. Wang, and T. Higo, “SLAC High Gradient Testing of a KEK X-Band Accelerator Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA17, pp. 3420-3422.
[n] S. A. Kahn et al., “Incorporating RF into a Muon Helical Cooling Channel”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE072, pp. 3509-3511.
[n] A. Bulatov, Yu. Evtushenko, V. Kolmogorov, and A. S. Medvedko, “High-voltage Modulator with Small Energy Accumulation in the Output Filter”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7A02, pp. 2208-2210.
[n] M. Kando et al., “Design of Electron Beam Injection System for Laser Acceleration Experiments at JAERI-Kansai”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA137, pp. 3702-3704.
[n] V. Tioukine, K. Aulenbacher, H. Euteneuer, K.-H. Kaiser, and S. Ratschow, “Spin Manipulation at MAMI - C”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO022, pp. 1816-1818.
[n] R. Jones Geneva, “Possible Spin-Offs from LHC Physics Experiments for Beam Instrumentation”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper IT11, pp. XX-XX.
[n] A. Novokhatski, A. V. Aleksandrov, and S. A. Heifets, “Beam Diagnostic by Outside Beam Chamber Fields”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP035, pp. 4024-4026.
[n] M. Yamamoto et al., “High Power Test of MA Cavity for J-PARC RCS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN063, pp. 1532-1534.
[n] M. Yu et al., “Fabrication and Test of Short Helical Solenoid Model Based on YBCO Tape”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP153, pp. 1118-1120.
[n] J. Seeman et al., “Design for a 1036 Super-B-factory at PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT144, pp. 878-880.
[n] I. Miura et al., “A High Energy Version of the RCNP Ring Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper N04, pp. 579-582.
[n] Q. S. Shu et al., “The Effects of Exposing Well Processed RF Surfaces of Superconducting Cavities to Various Media”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G10, pp. XX-XX.
[n] G. Bassi, J. A. Ellison, and K. A. Heinemann, “A Vlasov-Maxwell Solver to Study Microbunching Instability in the FERMI@ELETTRA First Bunch Compressor System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUOBG04, pp. 971-973.
[n] V. A. Andreev and G. Parisi, “Field Stabilization and End-Cell Tuning in a 4-vane RFQ”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1300-1303.
[n] S. Miura, T. Inagaki, H. Maesaka, H.-S. Lee, H. Matsumoto, and T. Shintake, “Developing S-band Accelerating Structures”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD51, pp. 153-155.
[n] M. L. Allegrini, D. Benini, D. Bisiach, M. Maggiore, L. Pranovi, and L. de Ruvo, “Beam loss monitors characterization for SPES proton beam line”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4736-4738. doi:10.18429/JACoW-IPAC2023-THPL115
[n] D. Moffat et al., “Superconducting Niobium RF Cavities Designed to Attain High Surface Electric Fields”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G03, pp. XX-XX.
[n] R. Kato et al., “Far-Infrared Free Electron Laser Based on the L-Band Linac at Osaka University”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D019, pp. 716-718.
[n] Th. Beiser, K. Aulenbacher, M. W. Bruker, and J. Dietrich, “Preliminary Studies of Bem-Induced Fluorescence and Status of the Beam-Current Upgrade of the Electron-Cooler Test-Bench at HIM”, in Proc. COOL'19, Novosibirsk, Russia, Sep. 2019, pp. 83-85. doi:10.18429/JACoW-COOL2019-TUPS04
[n] S. Ganguly, K. T. Pitts, J. D. Crnkovic, and C. C. Polly, “Lost Muon Studies for the Muon g-2 Experiment at Fermilab”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3573-3576. doi:10.18429/JACoW-IPAC2018-THPAK139
[n] H. Zen et al., “Present Status and Upgrade Plan of the UVSOR-II Free Electron Laser”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC36, pp. 576-579.
[n] R. Denz, K. Dahlerup-Petersen, and K. H. Mess, “Electronic Systems for the Protection of Superconducting Devices in the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD010, pp. 2422-2424.
[n] P. Jain, R. Kumar, P. K. Nema, P. Singh, and V. L. SR. sista, “Thermo-structural Analysis of 400 KeV Deuteron RFQ Components”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA093, pp. 235-237.
[n] G. Ramirez et al., “NSLS X-Ray Ring RF System Upgrade”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1419-1421.
[n] F. F. Bertinelli et al., “Design and Fabrication of Superfluid Helium Heat Exchanger Tubes for the LHC Superconducting Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT010, pp. 1837-1839.
[n] A. V. Zlobin et al., “Modeling the High-Field Section of a Muon Helical Cooling Channel”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB054, pp. 391-393.
[n] F. Hug et al., “Status of the MESA ERL Project”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 14-17. doi:10.18429/JACoW-ERL2019-MOCOXBS05
[n] Y.-S. Cheng et al., “Virtual Power Supply Control Environment for the TPS Project”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC156, pp. 2349-2351.
[n] A. E. Vlieks, W. R. Fowkes, R. J. Loewen, and S. G. Tantawi, “High Power RF Component Testing for the NLC”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4074, pp. 570-572.
[n] V. Auslender et al., “Status of the Industrial RF-accelerators in BINP”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THC3H101, pp. 622-624.
[n] P. Lebrun, J. Cary, S. Veitzer, P. Spentzouris, and P. Stoltz, “Accurate Simulation of the Electron Cloud in the Fermilab Main Injector with VORPAL”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper MOD03, pp. 152-161.
[n] D. E. Rees et al., “The RF System Design for the Spallation Neutron Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH099, pp. 1002-1004.
[n] S. Matsumoto et al., “High Power Testing Results of the X-Band Mixed-Mode RF Windows for Linear Colliders”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA02, pp. 736-738.
[n] Ph. Gayet, “UNICOS a Framework to Build Industry like Control Systems: Principles & Methodology”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper I3_002.
[n] A. H. Shapiro, R. C. Gentzlinger, J. E. Ledford, M. A. Madrid, D. I. Montoya, and T. Tajima, “A New Temperature and X-Ray Mapping System for 700-MHz 5-Cell Superconducting Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH144, pp. 1116-1118.
[n] Y. R. Pan et al., “Post-mortem Analysis at TLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC157, pp. 2352-2354.
[n] V. P. Derenchuk and A. S. Belov, “A Multi-Milliampere Polarized and Unpolarized Negative Ion Source for IUCF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH008, pp. 2093-2095.
[n] N. Vinokurov et al., “Commissioning of Novosibirsk Multi-pass Energy Recovery Linac”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THCAU01, pp. 507-510.
[n] J. Seeman et al., “Achieving a Luminosity of 1034/cm2/s in the PEP-II B-factory”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS045, pp. 643-645.
[n] T. Saeki et al., “R&D for the Post-EP Processes of Superconducting RF Cavity”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO085, pp. 824-828.
[n] C. W. Roberson, “The Racetrack Induction Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3433-3436.
[n] S. Veitzer, K. Sonnad, P. Lebrun, and P. Stoltz, “Modeling Electron Cloud Buildup and Microwave Diagnostics using VORPAL”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper MOD04, pp. 162-166.
[n] M. J. Lamm et al., “4-Coil Superconducting Helical Solenoid Model for MANX”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP059, pp. 265-267.
[n] F. Varela et al., “TIP: An Umbrella Application for all SCADA-Based Applications for the CERN Technical Infrastructure”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 184-187. doi:10.18429/JACoW-ICALEPCS2015-MOPGF039
[n] R. Wright, D. Kerstiens, G. Vaughn, and R. E. Weiss, “EPICS Simulation Tools for Control System Development (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-61, pp. 845-847.
[n] M. Satoh, N. Iida, T. Suwada, K. Minoshima, and S. Telada, “Laser-based Alignment System at the KEKB Injector Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO023, pp. 529-531.
[n] B. Copy, O. O. Andreassen, Ph. Gayet, M. Labrenz, H. Milcent, and F. Piccinelli, “Scalable Web Broadcasting for Historical Industrial Control Data”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 790-793. doi:10.18429/JACoW-ICALEPCS2015-WEPGF042
[n] G. Bisoffi, A. Lombardi, A. Pisent, and V. A. Andreev, “Studies of a Superconducting RFQ for Legnaro”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-29, pp. 774-776.
[n] D. Moffat et al., “Studies on the Nature of Field Emission Sites”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91D02, pp. XX-XX.
[n] T. Watanabe et al., “Subpicosecond Electron Beam Diagnostics by Coherent Transition Radiation Interferometer”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D027, pp. 740-742.
[n] A. Shibayama, “125 MHz Cavity for NAR”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 240-243.
[n] L. Zang, N. Iida, Y. Ogawa, M. Satoh, M. Yoshida, and D. M. Zhou, “KEKB Linac Wakefield Studies of Comparing Theoretical Calculation, Simulation and Experimental Measurement”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS058, pp. 739-741.
[n] P. Heil and K. Aulenbacher, “Smith-Purcell Radiation for Bunch Length Measurements at the Injection of MESA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4213-4215. doi:10.18429/JACoW-IPAC2018-THPMF062
[n] S. Simon, C. Benjamin, R. Valizadeh, and J. Bradley, “Comparison on the superconducting properties of Nb and NbTiN thin films produced by both HiPIMS and bipolar HiPIMS”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2802-2805. doi:10.18429/JACoW-IPAC2024-WEPS48
[n] T. Saeki et al., “Studies on the Electro-Polishing process with Nb sample plates at KEK.”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO086, pp. 829-829.
[n] I. Miura, T. Saito, and A. Shimizu, “RF System for the RCNP Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-19, pp. 2198-2201.
[n] I. Krouptchenkov, A. Brenger, G. Kube, F. Schmidt-F?Âhre, and K. Wittenburg, “Experience with the Commissioning of the Libera Brilliance BPM Electronics at PETRA III”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD03, pp. 291-293.
[n] N. Catalan-Lasheras, S. Fartoukh, and R. Jones Geneva, “Recent Advances in the Measurement of Chromaticity Via Head-Tail Phase Shift Analysis”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM08, pp. XX-XX.
[n] J. Antony and R. Kumar, “Multichannel High Voltage Power Supply Controls Solution Using Compact Distributed Ethernet Based Boards and Qt Based GUI”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD15, pp. 169-171.
[n] A. J. Kozubal and R. E. Weiss, “Lessons Learned on the Ground Test Accelerator Control System”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-57, pp. 834-836.
[n] Th. Beiser, K. Aulenbacher, and J. Dietrich, “Investigation of Ion Trapping and Beam-Induced Fluorescence at the Electron Cooler Test-Bench at HIM”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 76-78. doi:10.18429/JACoW-COOL2023-THPOSRP13
[n] T. Kitayama, N. Kawakami, Y. Sato, A. Shibayama, Y. Uno, and Y. Watanabe, “High-Speed, High-Accuracy Magnet Power Supply Using FET Chopper for Synchrotron Facility”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1145-1148.
[n] Y. Otake, S. Tokumoto, and H. Mizuno, “Design and High-Power Test of a TE11-Mode X-Band RF Window with Taper Transitions”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ29, pp. 1590-1592.
[n] S. A. Heifets and S. A. Kheifets, “High-Frequency Limit of the Longitudinal Impedance of an Array of Cavities”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 705-708.
[n] H. Delsim-Hashemi, K. Floettmann, M. Seebach, and S. Bayesteh, “Charge Monitors at the Relativistic Electron Gun for Atomic Exploration ÔÇô REGAE”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF24, pp. 868-871.
[n] V. A. Andreev et al., “Injector of High-current Multicharge Heavy Ions Beam for the TWAC Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP23H, pp. 755-757.
[n] K. Aulenbacher, Th. Beiser, J. Dietrich, and W. Klag, “Sustaining Competences for Electron Cooling at HESR”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 37-39. doi:10.18429/JACoW-COOL2023-THPAM1R2
[n] M. Seebach, M. Werner Deutsches Elektronen-Synchrotron, H. Franz, and A. Ehnes Deutsches Elektronen-Synchrotron, “Parasitic Bunch Measurement in e+/e- Storage Rings”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM24, pp. XX-XX.
[n] P. Lebrun, “Collaborating with Industry: Lessons from the LHC Megaproject”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEIM02, pp. 1963-1963.
[n] M. L. Lopes, V. S. Kashikhin, K. Yonehara, M. Yu, and A. V. Zlobin, “Studies of High-field Sections of a Muon Helical Cooling Channel with Coil Separation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP172, pp. 1148-1150.
[n] Ph. Gayet, E. Blanco Vinuela, B. Bradu, and R. Cirillo, “Online Analysis for Anticipated Failure Diagnostics of the CERN Cryogenic Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1412-1415. doi:10.18429/JACoW-ICALEPCS2017-THPHA030
[n] X. T. Wang et al., “Drive Laser Temporal Shaping Techniques for Shanghai Soft X-Ray Free Electron Laser”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 466-468. doi:10.18429/JACoW-FEL2019-WEP058
[n] V. A. Andreev and G. Parisi, “A 90 degree -apart-stem Low Frequency RFQ”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP077G, pp. 789-791.
[n] F. Stulle et al., “Resonant Cavity for Beam Current Diagnostics in Medical Accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4550-4553. doi:10.18429/JACoW-IPAC2023-THPL052
[n] P. Lebrun and P. H. Garbincius, “Assessing Risk in Costing High-energy Accelerators: from Existing Projects to the Future Linear Collider”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE021, pp. 3392-3394.
[n] A. T. Drobot, H. Hanerfeld, W. B. Herrmannsfeldt, K. Ko, and L. Seftor, “Numerical Simulation of High Power RF Sources”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3633-3636.
[n] A. Ogata, K. Nakajima, and N. Yamamoto, “Longitudinal Instability in TRISTAN Main Ring Observed by a Streak Camera”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 809-812.
[n] D. Teytelman et al., “Measurements of Transverse Coupled-bunch Instabilities in PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT160, pp. 2834-2836.
[n] Y.-C. Chao et al., “Achieving Beam Quality Requirements for Parity Experiments at Jefferson Lab”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT163, pp. 1509-1511.
[n] V. A. Andreev et al., “Development of RFQ Accelerator for the MMF Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3109-3111.
[n] D. V. Neuffer, J. Bradley, and D. Stratakis, “Muon Intensity Increase by Wedge Absorbers for low-E Muon Experiments”, in Proc. COOL'17, Bonn, Germany, Sep. 2017, pp. 32-36. doi:10.18429/JACoW-COOL2017-TUP04
[n] J. W. Wang et al., “SLAC/CERN High Gradient Tests of an X-Band Accelerating Section”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAG13, pp. 653-655.
[n] F. Stulle et al., “Beam Current Measurements with Sub-Microampere Resolution using CWCT and BCM-CW-E”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 63-66. doi:10.18429/JACoW-IBIC2019-MOPP003
[n] W. R. Fowkes, E. N. Jongewaard, R. J. Loewen, S. G. Tantawi, and A. E. Vlieks, “An All-Metal High Power Circularly Polarized X-Band RF Load”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P056, pp. 3189-3191.
[n] I. M. Kapchinskij et al., “The Launching of a 3-MeV Proton RFQ Linac”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3579-3582.
[n] K. Hosono, M. Inoue, T. Itahashi, I. Miura, and A. Shimizu, “Magnet Model Studies for a Proposed Ring Cyclotron System at RCNP”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-03, pp. 379-381.
[n] P. Lebrun, J. R. Cary, P. Spentzouris, P. Stolz, and S. A. Veitzer, “Accurate Simulation of the Electron Cloud in the Fermilab Main Injector with VORPAL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD015, pp. 1955-1957.
[n] T. Fogg, M. Dosanjh, A. Gerbershagen, and J. Schippers, “Beam Induced Fluorescence experiments for Ultra-High-Dose-Rate dosimetry in proton therapy”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP8012, unpublished.
[n] S. Simon, C. Benjamin, R. Valizadeh, and J. Bradley, “Tailoring the production of Nb superconducting films for SRF cavities: mass/energy spectroscopy and film characterisation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2806-2809. doi:10.18429/JACoW-IPAC2024-WEPS49
[n] M. Dehn et al., “Beam Diagnostics and Instrumentation for MESA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 307-309. doi:10.18429/JACoW-IPAC2022-MOPOPT028
[n] T. Hattori et al., “Design of an 80-MHz RFQ Linac for Heavy Ions”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3115-3118.
[n] A. Mondelli and C. W. Roberson, “A High-Current Racetrack Induction Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3212-3215.
[n] J. D. Crnkovic, W. Morse, S. Ganguly, and D. Stratakis, “Lost Muon Study for the Muon g-2 Experiment at Fermilab”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3230-3233. doi:10.18429/JACoW-IPAC2017-WEPIK119
[n] G. Li et al., “The Progress and Status of HEPS Beamline Control System”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 650-654. doi:10.18429/JACoW-ICALEPCS2023-TUPDP052
[n] J. Sears et al., “Microscopic Investigation of RF Surfaces of 3 GHz Niobium Accelerator Cavities Following RF Processing”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 889-892.
[n] J. Valladares, J. Bradley, L. Castellano, and T. Tajima, “CST simulation and RF power for an equivalent SCL cavity at LANSCE”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 404-406. doi:10.18429/JACoW-NAPAC2025-TUP025
[n] K. Yokoyama et al., “The LEBRA 125 MeV Electron Linac for FEL And PXR Generation”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP25, pp. 90-92.
[n] A. Perin, B. Bradu, J. Bremer, S. Claudet, D. Delikaris, and F. Ferrand, “Cryogenic eficiency and sustainability aspects for particle accelerators & detectors”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1691-1694. doi:10.18429/JACoW-IPAC2025-WEBD1
[n] C. W. Roberson, “Free Electron Laser Beam Quality Research”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH070, pp. XX-XX.
[n] A. G. Kobets et al., “Features of the Electronic Cooling System of the NICA Booster”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 236-238. doi:10.18429/JACoW-RuPAC2021-TUPSB04
[n] F. Stulle et al., “A 3GHz Wall Current Transformer for Very High Bandwidth Beam Current Measurements”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 74-78. doi:10.18429/JACoW-IBIC2025-MOPCO08
[n] P. Heil et al., “High Energy Density Irradiation With MAMI LINAC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1296-1299. doi:10.18429/JACoW-IPAC2017-TUPAB003
For LaTeX
Use Complete Form
For BibTeX
References
- S. Simon, C. Benjamin, J. Bradley, and R. Valizadeh, “Impact of ion and neutral angular distribution on thin film deposition in HiPIMS and bipolar HiPIMS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB073, unpublished.
- K. Nakajima, T. Kageyama, and A. Ogata, “Variation of Longitudinal Beam Position and Profile During Acceleration in Tristan Main Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 570-573.
- R. L. Kustom, S. A. Martin, P. F. Meads, G. Wuestefeld, and E. Zaplatin, “The FFAG as an Accelerator for High Intensity Proton Beams”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 574-577.
- B. Comiskey et al., “Progress toward dual-pulse operation at the Proton Storage Ring of LANSCE”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 558-562.
- V. V. Oreshonok, V. V. Kolmogorov, and A. N. Karpushov, “Control System for the 1 MW Neutral Beam Injector”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 712-714.
- S. A. Kheifets and S. A. Heifets, “Radiation of a Charge in a Perfectly Conducting Cylindrical Pipe with a Jump in its Cross Section”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-24, pp. 493-495.
- F. Stulle et al., “Beam Loss and Average Beam Current Measurements Using a CWCT”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 882-885.
- A. Novokhatski, S. A. Heifets, and D. Teytelman, “High Current Effects in the PEP-II SLAC B-factory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS077, pp. 4225-4227.
- S. Atieh et al., “Welding and Quality Control for the Consolidation of the LHC Superconducting Magnets and Circuits”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2709-2711.
- R. J. Loewen, A. Menegat, A. E. Vlieks, J. W. Wang, and T. Higo, “SLAC High Gradient Testing of a KEK X-Band Accelerator Structure”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA17, pp. 3420-3422.
- S. A. Kahn et al., “Incorporating RF into a Muon Helical Cooling Channel”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE072, pp. 3509-3511.
- A. Bulatov, Yu. Evtushenko, V. Kolmogorov, and A. S. Medvedko, “High-voltage Modulator with Small Energy Accumulation in the Output Filter”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP7A02, pp. 2208-2210.
- M. Kando et al., “Design of Electron Beam Injection System for Laser Acceleration Experiments at JAERI-Kansai”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA137, pp. 3702-3704.
- V. Tioukine, K. Aulenbacher, H. Euteneuer, K.-H. Kaiser, and S. Ratschow, “Spin Manipulation at MAMI - C”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO022, pp. 1816-1818.
- R. Jones Geneva, “Possible Spin-Offs from LHC Physics Experiments for Beam Instrumentation”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper IT11, pp. XX-XX.
- A. Novokhatski, A. V. Aleksandrov, and S. A. Heifets, “Beam Diagnostic by Outside Beam Chamber Fields”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP035, pp. 4024-4026.
- M. Yamamoto et al., “High Power Test of MA Cavity for J-PARC RCS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN063, pp. 1532-1534.
- M. Yu et al., “Fabrication and Test of Short Helical Solenoid Model Based on YBCO Tape”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP153, pp. 1118-1120.
- J. Seeman et al., “Design for a 1036 Super-B-factory at PEP-II”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT144, pp. 878-880.
- I. Miura et al., “A High Energy Version of the RCNP Ring Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper N04, pp. 579-582.
- Q. S. Shu et al., “The Effects of Exposing Well Processed RF Surfaces of Superconducting Cavities to Various Media”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G10, pp. XX-XX.
- G. Bassi, J. A. Ellison, and K. A. Heinemann, “A Vlasov-Maxwell Solver to Study Microbunching Instability in the FERMI@ELETTRA First Bunch Compressor System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUOBG04, pp. 971-973.
- V. A. Andreev and G. Parisi, “Field Stabilization and End-Cell Tuning in a 4-vane RFQ”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1300-1303.
- S. Miura, T. Inagaki, H. Maesaka, H.-S. Lee, H. Matsumoto, and T. Shintake, “Developing S-band Accelerating Structures”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD51, pp. 153-155.
- M. L. Allegrini, D. Benini, D. Bisiach, M. Maggiore, L. Pranovi, and L. de Ruvo, “Beam loss monitors characterization for SPES proton beam line”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL115, pp. 4736-4738.
- D. Moffat et al., “Superconducting Niobium RF Cavities Designed to Attain High Surface Electric Fields”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G03, pp. XX-XX.
- R. Kato et al., “Far-Infrared Free Electron Laser Based on the L-Band Linac at Osaka University”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D019, pp. 716-718.
- Th. Beiser, K. Aulenbacher, M. W. Bruker, and J. Dietrich, “Preliminary Studies of Bem-Induced Fluorescence and Status of the Beam-Current Upgrade of the Electron-Cooler Test-Bench at HIM”, in Proc. 12th Workshop on Beam Cooling and Related Topics (COOL'19), Novosibirsk, Russia, Sep. 2019, pp. 83-85.
- S. Ganguly, K. T. Pitts, J. D. Crnkovic, and C. C. Polly, “Lost Muon Studies for the Muon g-2 Experiment at Fermilab”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3573-3576.
- H. Zen et al., “Present Status and Upgrade Plan of the UVSOR-II Free Electron Laser”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC36, pp. 576-579.
- R. Denz, K. Dahlerup-Petersen, and K. H. Mess, “Electronic Systems for the Protection of Superconducting Devices in the LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD010, pp. 2422-2424.
- P. Jain, R. Kumar, P. K. Nema, P. Singh, and V. L. SR. sista, “Thermo-structural Analysis of 400 KeV Deuteron RFQ Components”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA093, pp. 235-237.
- G. Ramirez et al., “NSLS X-Ray Ring RF System Upgrade”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1419-1421.
- F. F. Bertinelli et al., “Design and Fabrication of Superfluid Helium Heat Exchanger Tubes for the LHC Superconducting Magnets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT010, pp. 1837-1839.
- A. V. Zlobin et al., “Modeling the High-Field Section of a Muon Helical Cooling Channel”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB054, pp. 391-393.
- F. Hug et al., “Status of the MESA ERL Project”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 14-17.
- Y.-S. Cheng et al., “Virtual Power Supply Control Environment for the TPS Project”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC156, pp. 2349-2351.
- A. E. Vlieks, W. R. Fowkes, R. J. Loewen, and S. G. Tantawi, “High Power RF Component Testing for the NLC”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4074, pp. 570-572.
- V. Auslender et al., “Status of the Industrial RF-accelerators in BINP”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THC3H101, pp. 622-624.
- P. Lebrun, J. Cary, S. Veitzer, P. Spentzouris, and P. Stoltz, “Accurate Simulation of the Electron Cloud in the Fermilab Main Injector with VORPAL”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper MOD03, pp. 152-161.
- D. E. Rees et al., “The RF System Design for the Spallation Neutron Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH099, pp. 1002-1004.
- S. Matsumoto et al., “High Power Testing Results of the X-Band Mixed-Mode RF Windows for Linear Colliders”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THA02, pp. 736-738.
- Ph. Gayet, “UNICOS a Framework to Build Industry like Control Systems: Principles & Methodology”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper I3_002.
- A. H. Shapiro, R. C. Gentzlinger, J. E. Ledford, M. A. Madrid, D. I. Montoya, and T. Tajima, “A New Temperature and X-Ray Mapping System for 700-MHz 5-Cell Superconducting Cavities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH144, pp. 1116-1118.
- Y. R. Pan et al., “Post-mortem Analysis at TLS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC157, pp. 2352-2354.
- V. P. Derenchuk and A. S. Belov, “A Multi-Milliampere Polarized and Unpolarized Negative Ion Source for IUCF”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH008, pp. 2093-2095.
- N. Vinokurov et al., “Commissioning of Novosibirsk Multi-pass Energy Recovery Linac”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper THCAU01, pp. 507-510.
- J. Seeman et al., “Achieving a Luminosity of 1034/cm2/s in the PEP-II B-factory”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS045, pp. 643-645.
- T. Saeki et al., “R&D for the Post-EP Processes of Superconducting RF Cavity”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO085, pp. 824-828.
- C. W. Roberson, “The Racetrack Induction Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3433-3436.
- S. Veitzer, K. Sonnad, P. Lebrun, and P. Stoltz, “Modeling Electron Cloud Buildup and Microwave Diagnostics using VORPAL”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper MOD04, pp. 162-166.
- M. J. Lamm et al., “4-Coil Superconducting Helical Solenoid Model for MANX”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP059, pp. 265-267.
- F. Varela et al., “TIP: An Umbrella Application for all SCADA-Based Applications for the CERN Technical Infrastructure”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 184-187.
- R. Wright, D. Kerstiens, G. Vaughn, and R. E. Weiss, “EPICS Simulation Tools for Control System Development (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-61, pp. 845-847.
- M. Satoh, N. Iida, T. Suwada, K. Minoshima, and S. Telada, “Laser-based Alignment System at the KEKB Injector Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO023, pp. 529-531.
- B. Copy, O. O. Andreassen, Ph. Gayet, M. Labrenz, H. Milcent, and F. Piccinelli, “Scalable Web Broadcasting for Historical Industrial Control Data”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 790-793.
- G. Bisoffi, A. Lombardi, A. Pisent, and V. A. Andreev, “Studies of a Superconducting RFQ for Legnaro”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-29, pp. 774-776.
- D. Moffat et al., “Studies on the Nature of Field Emission Sites”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91D02, pp. XX-XX.
- T. Watanabe et al., “Subpicosecond Electron Beam Diagnostics by Coherent Transition Radiation Interferometer”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D027, pp. 740-742.
- A. Shibayama, “125 MHz Cavity for NAR”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 240-243.
- L. Zang, N. Iida, Y. Ogawa, M. Satoh, M. Yoshida, and D. M. Zhou, “KEKB Linac Wakefield Studies of Comparing Theoretical Calculation, Simulation and Experimental Measurement”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS058, pp. 739-741.
- P. Heil and K. Aulenbacher, “Smith-Purcell Radiation for Bunch Length Measurements at the Injection of MESA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4213-4215.
- S. Simon, C. Benjamin, R. Valizadeh, and J. Bradley, “Comparison on the superconducting properties of Nb and NbTiN thin films produced by both HiPIMS and bipolar HiPIMS”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS48, pp. 2802-2805.
- T. Saeki et al., “Studies on the Electro-Polishing process with Nb sample plates at KEK.”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO086, pp. 829-829.
- I. Miura, T. Saito, and A. Shimizu, “RF System for the RCNP Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper D-19, pp. 2198-2201.
- I. Krouptchenkov, A. Brenger, G. Kube, F. Schmidt-F?Âhre, and K. Wittenburg, “Experience with the Commissioning of the Libera Brilliance BPM Electronics at PETRA III”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD03, pp. 291-293.
- N. Catalan-Lasheras, S. Fartoukh, and R. Jones Geneva, “Recent Advances in the Measurement of Chromaticity Via Head-Tail Phase Shift Analysis”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM08, pp. XX-XX.
- J. Antony and R. Kumar, “Multichannel High Voltage Power Supply Controls Solution Using Compact Distributed Ethernet Based Boards and Qt Based GUI”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD15, pp. 169-171.
- A. J. Kozubal and R. E. Weiss, “Lessons Learned on the Ground Test Accelerator Control System”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-57, pp. 834-836.
- Th. Beiser, K. Aulenbacher, and J. Dietrich, “Investigation of Ion Trapping and Beam-Induced Fluorescence at the Electron Cooler Test-Bench at HIM”, in Proc. 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper THPOSRP13, pp. 76-78.
- T. Kitayama, N. Kawakami, Y. Sato, A. Shibayama, Y. Uno, and Y. Watanabe, “High-Speed, High-Accuracy Magnet Power Supply Using FET Chopper for Synchrotron Facility”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1145-1148.
- Y. Otake, S. Tokumoto, and H. Mizuno, “Design and High-Power Test of a TE11-Mode X-Band RF Window with Taper Transitions”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ29, pp. 1590-1592.
- S. A. Heifets and S. A. Kheifets, “High-Frequency Limit of the Longitudinal Impedance of an Array of Cavities”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 705-708.
- H. Delsim-Hashemi, K. Floettmann, M. Seebach, and S. Bayesteh, “Charge Monitors at the Relativistic Electron Gun for Atomic Exploration ÔÇô REGAE”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF24, pp. 868-871.
- V. A. Andreev et al., “Injector of High-current Multicharge Heavy Ions Beam for the TWAC Project”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP23H, pp. 755-757.
- K. Aulenbacher, Th. Beiser, J. Dietrich, and W. Klag, “Sustaining Competences for Electron Cooling at HESR”, in Proc. 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper THPAM1R2, pp. 37-39.
- M. Seebach, M. Werner Deutsches Elektronen-Synchrotron, H. Franz, and A. Ehnes Deutsches Elektronen-Synchrotron, “Parasitic Bunch Measurement in e+/e- Storage Rings”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM24, pp. XX-XX.
- P. Lebrun, “Collaborating with Industry: Lessons from the LHC Megaproject”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEIM02, pp. 1963-1963.
- M. L. Lopes, V. S. Kashikhin, K. Yonehara, M. Yu, and A. V. Zlobin, “Studies of High-field Sections of a Muon Helical Cooling Channel with Coil Separation”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP172, pp. 1148-1150.
- Ph. Gayet, E. Blanco Vinuela, B. Bradu, and R. Cirillo, “Online Analysis for Anticipated Failure Diagnostics of the CERN Cryogenic Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1412-1415.
- X. T. Wang et al., “Drive Laser Temporal Shaping Techniques for Shanghai Soft X-Ray Free Electron Laser”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 466-468.
- V. A. Andreev and G. Parisi, “A 90 degree -apart-stem Low Frequency RFQ”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP077G, pp. 789-791.
- F. Stulle et al., “Resonant Cavity for Beam Current Diagnostics in Medical Accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL052, pp. 4550-4553.
- P. Lebrun and P. H. Garbincius, “Assessing Risk in Costing High-energy Accelerators: from Existing Projects to the Future Linear Collider”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE021, pp. 3392-3394.
- A. T. Drobot, H. Hanerfeld, W. B. Herrmannsfeldt, K. Ko, and L. Seftor, “Numerical Simulation of High Power RF Sources”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3633-3636.
- A. Ogata, K. Nakajima, and N. Yamamoto, “Longitudinal Instability in TRISTAN Main Ring Observed by a Streak Camera”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 809-812.
- D. Teytelman et al., “Measurements of Transverse Coupled-bunch Instabilities in PEP-II”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT160, pp. 2834-2836.
- Y.-C. Chao et al., “Achieving Beam Quality Requirements for Parity Experiments at Jefferson Lab”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT163, pp. 1509-1511.
- V. A. Andreev et al., “Development of RFQ Accelerator for the MMF Linac”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3109-3111.
- D. V. Neuffer, J. Bradley, and D. Stratakis, “Muon Intensity Increase by Wedge Absorbers for low-E Muon Experiments”, in Proc. 11th Workshop on Beam Cooling and Related Topics (COOL'17), Bonn, Germany, Sep. 2017, pp. 32-36.
- J. W. Wang et al., “SLAC/CERN High Gradient Tests of an X-Band Accelerating Section”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAG13, pp. 653-655.
- F. Stulle et al., “Beam Current Measurements with Sub-Microampere Resolution using CWCT and BCM-CW-E”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 63-66.
- W. R. Fowkes, E. N. Jongewaard, R. J. Loewen, S. G. Tantawi, and A. E. Vlieks, “An All-Metal High Power Circularly Polarized X-Band RF Load”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P056, pp. 3189-3191.
- I. M. Kapchinskij et al., “The Launching of a 3-MeV Proton RFQ Linac”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3579-3582.
- K. Hosono, M. Inoue, T. Itahashi, I. Miura, and A. Shimizu, “Magnet Model Studies for a Proposed Ring Cyclotron System at RCNP”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-03, pp. 379-381.
- P. Lebrun, J. R. Cary, P. Spentzouris, P. Stolz, and S. A. Veitzer, “Accurate Simulation of the Electron Cloud in the Fermilab Main Injector with VORPAL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD015, pp. 1955-1957.
- T. Fogg, M. Dosanjh, A. Gerbershagen, and J. Schippers, “Beam Induced Fluorescence experiments for Ultra-High-Dose-Rate dosimetry in proton therapy”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP8012, this conference.
- S. Simon, C. Benjamin, R. Valizadeh, and J. Bradley, “Tailoring the production of Nb superconducting films for SRF cavities: mass/energy spectroscopy and film characterisation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS49, pp. 2806-2809.
- M. Dehn et al., “Beam Diagnostics and Instrumentation for MESA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 307-309.
- T. Hattori et al., “Design of an 80-MHz RFQ Linac for Heavy Ions”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3115-3118.
- A. Mondelli and C. W. Roberson, “A High-Current Racetrack Induction Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3212-3215.
- J. D. Crnkovic, W. Morse, S. Ganguly, and D. Stratakis, “Lost Muon Study for the Muon g-2 Experiment at Fermilab”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3230-3233.
- G. Li et al., “The Progress and Status of HEPS Beamline Control System”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP052, pp. 650-654.
- J. Sears et al., “Microscopic Investigation of RF Surfaces of 3 GHz Niobium Accelerator Cavities Following RF Processing”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 889-892.
- J. Valladares, J. Bradley, L. Castellano, and T. Tajima, “CST simulation and RF power for an equivalent SCL cavity at LANSCE”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 404-406.
- K. Yokoyama et al., “The LEBRA 125 MeV Electron Linac for FEL And PXR Generation”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP25, pp. 90-92.
- A. Perin, B. Bradu, J. Bremer, S. Claudet, D. Delikaris, and F. Ferrand, “Cryogenic eficiency and sustainability aspects for particle accelerators & detectors”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEBD1, pp. 1691-1694.
- C. W. Roberson, “Free Electron Laser Beam Quality Research”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOPPH070, pp. XX-XX.
- A. G. Kobets et al., “Features of the Electronic Cooling System of the NICA Booster”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 236-238.
- F. Stulle et al., “A 3GHz Wall Current Transformer for Very High Bandwidth Beam Current Measurements”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 74-78.
- P. Heil et al., “High Energy Density Irradiation With MAMI LINAC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1296-1299.
Back to search