Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Favourites
For Word
[n] P. Clout, “Sharing Control System Software”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1801-1806.
[n] M. Jain et al., “The L-CAPE Project at FNAL”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 719-722. doi:10.18429/JACoW-NAPAC2022-WEPA40
[n] S. Chattopadhyay, A. Faltens, and L. Smith, “Study of the Beam Breakup Mode in Linear Induction Accelerators for Heavy Ions”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2465-2468.
[n] E. I. Simakov and R. L. Edwards, “Design of a Wakefield Experiment in a Traveling-wave Photonic Band Gap Accelerating Structure”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP033, pp. 2798-2800.
[n] G. Asova et al., “Measurements of the Projected Normalized Transverse Emittance at PITZ”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH055, pp. 138-141.
[n] J. Schmidt, “The LANL proton radiography facility and near-term improvements”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper THP082, unpublished.
[n] C. W. Schmidt, M. Popovic, and L. Allen, “High Current Proton Tests of the Fermilab LINAC”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUD16, pp. 587-589.
[n] M. Mayerhofer et al., “Laser powder bed fusion for x-band RF cavities: A preliminary study”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2616-2619. doi:10.18429/JACoW-IPAC2025-THPB052
[n] B. O. Bolshakov et al., “Power Supply System of the Pulse Bending Magnet for the Linear Accelerator Operated at the Moscow Meson Factory”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC034, pp. 515-517.
[n] R. Pompili, “Plasmas and accelerators: lessons learned”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THWD3, unpublished.
[n] F. Bai, Y. He, X. Niu, and Z. Wang, “Design, fabrication, assembling and testing of QWR/HWR cryomodules for HIAF project”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper TUP03, unpublished.
[n] G. Machicoane, J. W. Stetson, P. A. Zavodszky, M. Steiner, and P. Miller, “Experimental Studies of Electrostatic and Solenoidal Focusing of Low-Energy, Heavy-Ion ECRIS Beams at the NSCL/MSU”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP046, pp. 352-354.
[n] Y. Chung et al., “Implementation of the Global and Local Beam Position Feedback Systems for the Advanced Photon Source Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ16, pp. 2702-2704.
[n] A. S. Fisher, A. L. Benwell, Y. Feng, and B. T. Jacobson, “A Plasma Attenuator for Soft X-Rays in LCLS-II”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 553-555. doi:10.18429/JACoW-FEL2019-WEP103
[n] C. Wittig, M. Mayerhofer, J. Mitteneder, and G. Dollinger, “A bead-pulling test stand for s-band cavities”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA059, unpublished.
[n] W. Shields, L. Nevay, and S. Boogert, “A review of the Beam Delivery Simulation (BDSIM) user community”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2668-2671. doi:10.18429/JACoW-IPAC2024-WEPR70
[n] G. Eremeev et al., “Achieving 10 MV cryomodule with Nb3Sn cavities”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper THYN02, unpublished.
[n] L. Ahle et al., “Current Status of the Recirculator Project at LLNL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP124, pp. 3248-3250.
[n] X. Shen, L. O. Dallin, R. M. Silzer, T. Summers, and M. S. de Jong, “Status and Upgrade Plan of 250 MeV Linac at CLS”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP001, pp. 380-382.
[n] E. S. McCrory, V. D. Shiltsev, A. J. Slaughter, and A. Xiao, “Fitting the Luminosity Decay in the Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP036, pp. 2434-2436.
[n] T.-S. F. Wang and L. Smith, “Transverse-Longitudinal Coupling in Intense Beams”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2477-2480.
[n] C. Burkhart et al., “ILC Marx Modulator Development Program Status”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP097, pp. 1015-1017.
[n] W. L. Waldron and L. L. Reginato, “TUB07”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB07, pp. 446-448.
[n] L. Zhang, H. H. Lu, and S. C. Sun, “Design of the CPMU Vacuum System at the HEPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1482-1484. doi:10.18429/JACoW-IPAC2017-TUPAB068
For LaTeX
Use Complete Form
For BibTeX
References
- P. Clout, “Sharing Control System Software”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1801-1806.
- M. Jain et al., “The L-CAPE Project at FNAL”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 719-722.
- S. Chattopadhyay, A. Faltens, and L. Smith, “Study of the Beam Breakup Mode in Linear Induction Accelerators for Heavy Ions”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2465-2468.
- E. I. Simakov and R. L. Edwards, “Design of a Wakefield Experiment in a Traveling-wave Photonic Band Gap Accelerating Structure”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP033, pp. 2798-2800.
- G. Asova et al., “Measurements of the Projected Normalized Transverse Emittance at PITZ”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper MOPPH055, pp. 138-141.
- J. Schmidt, “The LANL proton radiography facility and near-term improvements”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper THP082, unpublished.
- C. W. Schmidt, M. Popovic, and L. Allen, “High Current Proton Tests of the Fermilab LINAC”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUD16, pp. 587-589.
- M. Mayerhofer et al., “Laser powder bed fusion for x-band RF cavities: A preliminary study”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB052, pp. 2616-2619.
- B. O. Bolshakov et al., “Power Supply System of the Pulse Bending Magnet for the Linear Accelerator Operated at the Moscow Meson Factory”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC034, pp. 515-517.
- R. Pompili, “Plasmas and accelerators: lessons learned”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THWD3, unpublished.
- F. Bai, Y. He, X. Niu, and Z. Wang, “Design, fabrication, assembling and testing of QWR/HWR cryomodules for HIAF project”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper TUP03, unpublished.
- G. Machicoane, J. W. Stetson, P. A. Zavodszky, M. Steiner, and P. Miller, “Experimental Studies of Electrostatic and Solenoidal Focusing of Low-Energy, Heavy-Ion ECRIS Beams at the NSCL/MSU”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP046, pp. 352-354.
- Y. Chung et al., “Implementation of the Global and Local Beam Position Feedback Systems for the Advanced Photon Source Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ16, pp. 2702-2704.
- A. S. Fisher, A. L. Benwell, Y. Feng, and B. T. Jacobson, “A Plasma Attenuator for Soft X-Rays in LCLS-II”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 553-555.
- C. Wittig, M. Mayerhofer, J. Mitteneder, and G. Dollinger, “A bead-pulling test stand for s-band cavities”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA059, unpublished.
- W. Shields, L. Nevay, and S. Boogert, “A review of the Beam Delivery Simulation (BDSIM) user community”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR70, pp. 2668-2671.
- G. Eremeev et al., “Achieving 10 MV cryomodule with Nb3Sn cavities”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper THYN02, unpublished.
- L. Ahle et al., “Current Status of the Recirculator Project at LLNL”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP124, pp. 3248-3250.
- X. Shen, L. O. Dallin, R. M. Silzer, T. Summers, and M. S. de Jong, “Status and Upgrade Plan of 250 MeV Linac at CLS”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP001, pp. 380-382.
- E. S. McCrory, V. D. Shiltsev, A. J. Slaughter, and A. Xiao, “Fitting the Luminosity Decay in the Tevatron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP036, pp. 2434-2436.
- T.-S. F. Wang and L. Smith, “Transverse-Longitudinal Coupling in Intense Beams”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2477-2480.
- C. Burkhart et al., “ILC Marx Modulator Development Program Status”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP097, pp. 1015-1017.
- W. L. Waldron and L. L. Reginato, “TUB07”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUB07, pp. 446-448.
- L. Zhang, H. H. Lu, and S. C. Sun, “Design of the CPMU Vacuum System at the HEPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1482-1484.
Back to search