Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Boucly, C. Monier, N. Magnin, O. Y. Yagci, and T. Oulevey, “Study of PLC hardware integration within the CERN controls environment”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper WEPD040, unpublished.
[n] E. A. Kowalski, D. W. Devins, and A. Seidman, “The IUCF Phase Probe”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1505-1509.
[n] P. Owusu, S. Karkare, J. Knefel, and J. Mama, “Growth and Evaluation of High QE Semiconductor Photocathodes for High-Brightness Electron Sources”, presented at the IPAC'26, Deauville, France, May 2026, paper THP3326, unpublished.
[n] V. L. Dorokhov et al., “The New Optical Device for Turn to Turn Beam Profile Measurement”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 593-596. doi:10.18429/JACoW-IBIC2016-WEBL04
[n] F. Tian, D. McCormick, and M. Ross, “Positron Jitter and Wakefield Effects in the SLC Injector Linac”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1312-1315.
[n] G. T. Konrad, “Performance of a High Efficiency High Power UHF Klystron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1689-1692.
[n] V. Korchuganov et al., “The Development of Synchrotron Radiation Source of NRC Kurchatov Institute""”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THXCH02, pp. 126-130.
[n] S. Hirlaender et al., “Automatisation of the SPS ElectroStatic Septa Alignment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4001-4004. doi:10.18429/JACoW-IPAC2019-THPRB080
[n] A. J. Saverskiy, H. Deruyter, M. Hernandez, A. V. Mishin, and D. Skowbo, “Portable X-Band Linear Electron Accelerators for Radiographic Applications”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP027, pp. 1985-1987.
[n] M. Sawamura, R. Hajima, R. Nagai, and N. Nishimori, “Design of ERL Spoke Cavity for Non-destructive Assay Research”, in Proc. ERL'11, Tsukuba, Japan, Oct. 2011, paper PSP021, pp. 140-143.
[n] I. V. Kalagin et al., “Status of the DC-280 Cyclotron Project”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 363-365. doi:10.18429/JACoW-Cyclotrons2016-THP25
[n] T. J. P. Ellison, “Beam Diagnosis for Unmeasurably Cold Beams (Invited Paper)”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VII-02, pp. 274-281.
[n] J. G. De Villiers et al., “Numerical Orbit Tracking in 3D Through the Injector Cyclotron for Heavy Ions at iThemba LABS”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 71-74. doi:10.18429/JACoW-Cyclotrons2016-MOP10
[n] R. Bakker, B. Franksen, B. Kuner, J. Rahn, and H. R, “A Cost-Efficent PC Based Framegrabber as Beam Diagnostic Tool in an EPICS Environment”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP045, pp. XX-XX.
[n] T. Kuo et al., “Initial Test Results from a Multicusp Source for TRIUMF's Radioactive Beam Facility”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2C006, pp. 2675-2677.
[n] V. Korchuganov et al., “Kurchatov Synchrotron Radiation Source Facilities Modernization”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WECHY02, pp. 136-140.
[n] C. S. Chen, K. T. Chen, C. H. Kuo, and K. K. Lin, “Bunch-by-Bunch Intensity, Position Monitor for the Taiwan Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP44C, pp. 1532-1534.
[n] J. L. Conradie et al., “New Priorities and Developments at NAC”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-05, pp. XX-XX.
[n] D. Van Winkle, J. D. Fox, and A. Young, “11.424 GHz Stripline Transversal Filter for Sub-Picosecond Bunch Timing Measurements”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM080, pp. 367-371.
[n] C. M. Chu, J. Galambos, J. Wei, C. K. Allen, and P. McGehee, “SNS Application Programming Plan”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP060, pp. XX-XX.
[n] J. Ferm?®, “Parameters of the Eigenellipsoid for Separated Sector Cyclotrons”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G1-09, pp. 461-463.
[n] D. T. Tran, “Focusing of an Alvarez Linac by Use of Magnetic Quadrupoles Oriented at 45o (Presented by M.G. Gilbaud)”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART3-6, pp. 309-327.
[n] G. Ascenção, M. Alves, L. Liu, and X. Resende, “Study of insertion devices effects in SIRIUS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1184-1187. doi:10.18429/JACoW-IPAC2023-MOPM088
[n] I. Will, “Drive Lasers for Photoinjectors”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 13, pp. XX-XX.
[n] J. E. Dusatko and J. D. Fox, “Ultra-Wideband Transverse Intra-Bunch Feedback: Beginning Development of a Next Generation 8GSa/s System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2001-2004. doi:10.18429/JACoW-IPAC2018-WEPAF073
[n] D. T. Palmer et al., “ORION: An Advanced Accelerator Facility at SLAC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH068, pp. 2251-2253.
[n] Y. R. Pan et al., “Post-mortem Analysis at TLS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC157, pp. 2352-2354.
[n] R. Steinbr??ck, M. Justus, M. Kuntzsch, T. Bergmann, and A. Kessler, “Trigger Generator for the Superconducting Linear Accelerator ELBE”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 46-48. doi:10.18429/JACoW-IBIC2015-MOPB011
[n] T. J. Roberts and Y. Bao, “MuSim, A Graphical User Interface for Multiple Simulation Codes”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 535-537. doi:10.18429/JACoW-NAPAC2016-TUPOB21
[n] J. B?ñhr et al., “Diagnostics for the Photon Injector Test Facility in Desy Zeuthen”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS21, pp. XX-XX.
[n] S. Kawata, Y. Masubuchi, T. Sato, and T. Teramoto, “Development of Two-Dimensional Implosion Code for LIB ICF”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 706-709.
[n] T. Furukawa et al., “Beam Monitors of NIRS Fast Scanning System for Particle Therapy”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB51, pp. 182-185.
[n] D. Yu, J. Clendenin, Y. Luo, D. Newsham, D. Schultz, and A. V. Smirnov, “Development of a Polarized Electron Gun Based on an S-Band PWT Photoinjector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB043, pp. 2129-2131.
[n] A. Blednykh, G. Bassi, V. V. Smaluk, and R. R. Lindberg, “A NUMERICAL STUDY OF THE MICROWAVE INSTABILITY AT APS”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 602-604. doi:10.18429/JACoW-NAPAC2016-TUPOB51
[n] R. G. Marathe, V. Bhatnagar, P. Fatnani, R. K. Gupta, G. Singh, and D. S. Thakur, “Radiation Safety System for INDUS Accelerator Complex”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA032, pp. 148-150.
[n] J.-M. Godefroy, J. Polian, F. Ribeiro, and T. Ruan, “MOSFET RF Power Amplifier for Accelerator Applications”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP04A, pp. 1811-1813.
[n] R. I. Saban, “LHC Hardware Commissioning Summary”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOZDM01, pp. 56-60.
[n] P. Elleaume, “ESRF Insertion Devices”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1061-1064.
[n] B. T. Freemire et al., “High Pressure RF Cavity Test at Fermilab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP032, pp. 160-162.
[n] C. Roderick and R. Billen, “The LSA Database to Drive the Accelerator Settings”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP006, pp. 417-419.
[n] L. Zeng et al., “Development of Analog Electronics for the Beam Loss Monitoring System in the Superconducting Section of the CSNS II Linac”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6627, unpublished.
[n] T. Saeki et al., “R&D for the Post-EP Processes of Superconducting RF Cavity”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO085, pp. 824-828.
[n] P. Proudlock and H. W. Isch, “The Power Converters for the RF Klystrons of LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1209-1212.
[n] G. Stinson and P. Bricault, “A Proposal for an Additional Beamline to the TRIUMF ISAC Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB024, pp. 1670-1672.
[n] L. E. Medina Medrano, R. Martin, R. Tomas, and F. Zimmermann, “Dynamic Aperture Studies for the FCC-ee”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 258-261. doi:10.18429/JACoW-IPAC2015-MOPWA059
[n] H. W. Isch, “The First Operational Experience of the LEP Power Converter Systems”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1203-1206.
[n] Q. Zhao, V. A. Andreev, J. Brandon, G. Machicoane, and F. Marti, “Experimental Studies of the ReA3 Triple-Harmonic Buncher”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP059, pp. 1686-1686.
[n] G. T. Konrad, “High Efficiency, CW, High Power Klystrons for Storage Ring Applications”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1249-1253.
[n] H. Zhang, J. Chen, R. Li, H. Huang, and L. Luo, “Development of the Electron Cooling Simulation Program for MEIC”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper TUPF02, pp. 101-103.
[n] J. Bradley III, D. Rees, R. Przeklasa, R. Jaitly, G. Schofield, and M. Scott, “Operational Experience with Two Types of 2 MW HVDC Power Supplies on LEDA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP145, pp. 1010-1012.
[n] M. Ball, T. J. P. Ellison, and C. M. Fox, “New Nondestructive Beam Diagnostics for the IUCF Cyclotron Cooler”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-02, pp. 278-282.
[n] T. Asaka, H. Hanaki, A. Mizuno, S. Suzuki, T. Taniuchi, and K. Yanagida, “Results of SPring-8 RF Gun”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A03, pp. 839-841.
[n] X. Serra-Gallifa, J. A. Avila-Abellan, J. J. Jamroz, and O. Matilla, “Em# Project. Improvement of Low Current Measurements at Alba Synchrotron”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC094, pp. 798-800.
[n] E. Noah, R. Catherall, Y. Kadi, C. Kharoua, J. Lettry, and T. Stora, “Driver Beam-led EURISOL Target Design Constraints”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC090, pp. 271-273.
[n] L. Tosi, D. Bulfone, E. Karantzoulis, M. Lonza, and V. Smaluk, “Diagnostics and Analysis of Instabilities with the Digital Transverse Multibunch Feedback at ELETTRA”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH314, pp. 2066-2068.
[n] Y. J. Li, K. Balewski, and W. Decking, “Dynamic Aperture Studies for PETRA III”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS021, pp. 3320-3322.
[n] J. Musson, C. Seaton, M. Spata, and J. Yan, “Application of Neural Network Algorithms for BPM Linearization”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG020, pp. 71-73.
[n] P. N. Prakash, D. Kanjilal, K. K. MISTRI, A. Roy, S. S. K. Sonti, and J. Zacharias, “Superconducting Niobium Resonator Fabrication And Testing At IUAC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA132, pp. 500-502.
[n] W. B. Ingalls, “Recent Operating Experience with the H- Ion Injector at LAMPF/LANSCE”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP24, pp. 704-706.
[n] H. Blosser and F. Resmini, “Invited Paper- Progress Report on the 500 MeV Superconducting Cyclotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3653-3659.
[n] G. Rodrigues, D. Kanjilal, P. Kumar, P. S. Lakshmy, and A. Mandal, “Operational Experience with the HTS-ECRIS, PKDELIS”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-17, pp. 107-110.
[n] S. Seletskiy, K. Mernick, L. Nguyen, P. Inacker, and R. Hulsart, “Feedbacks at Low Energy RHIC Electron Cooler”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper TUPCO27, unpublished.
[n] M. H. Nasr, M. Breidenbach, E. A. Nanni, and S. G. Tantawi, “Cryogenic-Copper Accelerating Structures: New Frontier for Beam Brightness, Efficiency and Cost-Capability”, in Proc. IPAC'20, Caen, France, May 2020, paper THVIR10, pp. XX-XX.
[n] H. Musfeldt, H. Kumpfert, and Dr. W. Schmidt, “A New Generation of High Power CW-Klystrons for Accelerator and Storage Ring Application, Practical Experience and Aspectrs for Future Developments”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2833-2836.
[n] M. Mu??oz, D. Einfeld, and Z. Mart?¡, “Effect of the Measured Magnetic Multipoles in the ALBA Lattice”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP070, pp. 3868-3870.
[n] I. Ashkenazi and G. E. Lahti, “Microprocessor Control for CEBAF RF Control Module”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1861-1864.
[n] D. Kuchler et al., “Operational Experience with the GTS-LHC Ion Source and Future Developments of the CERN Ion Injector”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP10, pp. 57-60.
[n] K. Johnson et al., “Streak Camera as a Diagnostic for High Intensity Cooled Bunched Beams”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1705-1708.
[n] B. E. Drendel, J. P. Morgan, and D. Vander Meulen, “Operating Procedure Changes to Improve Antiproton Production at the Fermilab Tevatron Collider”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP030, pp. 4832-4834.
[n] A. Burril and M. Poelker, “ERL07 Working Group 1 Summary: Electron Guns and Injector Designs”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 1, pp. 139-144.
[n] A. V. Aleksandrov, I. Hofmann, and J.-M. Lagniel, “Summary Report of the Working Group B: Beam Dynamics in High Intensity Linacs”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL02, pp. 485-486.
[n] A. Marinelli and J. B. Rosenzweig, “Models of Space-Charge Induced Optical Micro-Bunching”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB50, pp. 512-515.
[n] K. Bongardt and M. Pabst, “Accelerator Physics of High Intensity Proton Linacs”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUY02A, pp. 158-162.
[n] C. Y. Kuo, C.-H. Chang, M.-H. Huang, C.-S. Hwang, J. C. Jan, and F.-Y. Lin, “Design and Performance of Various kinds of Corrector Magnets for the Taiwan Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD014, pp. 3524-3526.
[n] D. K. Olsen et al., “HISTRAP Prototype Hardware Studies”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper C-04, pp. 70-75.
[n] V. Veshcherevich, S. A. Belomestnykh, W.-D. Moller, P. Quigley, J. J. Reilly, and J. Sears, “High Power Tests of First Input Couplers for Cornell ERL Injector Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS013, pp. 2355-2357.
[n] J. D. O et al., “BART: Development of a Sample Exchange System for MX Beamlines”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1919-1922. doi:10.18429/JACoW-ICALEPCS2017-THPHA200
[n] M. McMahan, B. Feinberg, D. Hubbard, and S. Meaney, “Stripping with a Fomblin Supersonic Jet at 112.5 keV/Nucleon”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-19, pp. 88-90.
[n] J. C. Schnuriger, “The 40 kA Dumping System for the ISR Beams”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1321-1324.
[n] S. Van der Schueren, R. De Maria, D. Gamba, and M. Migliorati, “Modeling and Measurements of the Impact of Dipole Fringe Fields in the Extra Low Energy Antiproton Ring”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5085, unpublished.
[n] S. Leontein and E. Westlin, “Destructive Beam Profile Monitor Electronics using Gated Current Integrators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP10E, pp. 1550-1552.
[n] S. Chemli et al., “The CERN Engineering Data Management System -A Status Report”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A01, pp. 2450-2452.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Boucly, C. Monier, N. Magnin, O. Y. Yagci, and T. Oulevey, “Study of PLC hardware integration within the CERN controls environment”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper WEPD040, unpublished.
- E. A. Kowalski, D. W. Devins, and A. Seidman, “The IUCF Phase Probe”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1505-1509.
- P. Owusu, S. Karkare, J. Knefel, and J. Mama, “Growth and Evaluation of High QE Semiconductor Photocathodes for High-Brightness Electron Sources”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP3326, this conference.
- V. L. Dorokhov et al., “The New Optical Device for Turn to Turn Beam Profile Measurement”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 593-596.
- F. Tian, D. McCormick, and M. Ross, “Positron Jitter and Wakefield Effects in the SLC Injector Linac”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1312-1315.
- G. T. Konrad, “Performance of a High Efficiency High Power UHF Klystron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1689-1692.
- V. Korchuganov et al., “The Development of Synchrotron Radiation Source of NRC Kurchatov Institute""”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper THXCH02, pp. 126-130.
- S. Hirlaender et al., “Automatisation of the SPS ElectroStatic Septa Alignment”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4001-4004.
- A. J. Saverskiy, H. Deruyter, M. Hernandez, A. V. Mishin, and D. Skowbo, “Portable X-Band Linear Electron Accelerators for Radiographic Applications”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP027, pp. 1985-1987.
- M. Sawamura, R. Hajima, R. Nagai, and N. Nishimori, “Design of ERL Spoke Cavity for Non-destructive Assay Research”, in Proc. 50th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'11), Tsukuba, Japan, Oct. 2011, paper PSP021, pp. 140-143.
- I. V. Kalagin et al., “Status of the DC-280 Cyclotron Project”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 363-365.
- T. J. P. Ellison, “Beam Diagnosis for Unmeasurably Cold Beams (Invited Paper)”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VII-02, pp. 274-281.
- J. G. De Villiers et al., “Numerical Orbit Tracking in 3D Through the Injector Cyclotron for Heavy Ions at iThemba LABS”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 71-74.
- R. Bakker, B. Franksen, B. Kuner, J. Rahn, and H. R, “A Cost-Efficent PC Based Framegrabber as Beam Diagnostic Tool in an EPICS Environment”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP045, pp. XX-XX.
- T. Kuo et al., “Initial Test Results from a Multicusp Source for TRIUMF's Radioactive Beam Facility”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2C006, pp. 2675-2677.
- V. Korchuganov et al., “Kurchatov Synchrotron Radiation Source Facilities Modernization”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WECHY02, pp. 136-140.
- C. S. Chen, K. T. Chen, C. H. Kuo, and K. K. Lin, “Bunch-by-Bunch Intensity, Position Monitor for the Taiwan Light Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP44C, pp. 1532-1534.
- J. L. Conradie et al., “New Priorities and Developments at NAC”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P2-05, pp. XX-XX.
- D. Van Winkle, J. D. Fox, and A. Young, “11.424 GHz Stripline Transversal Filter for Sub-Picosecond Bunch Timing Measurements”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM080, pp. 367-371.
- C. M. Chu, J. Galambos, J. Wei, C. K. Allen, and P. McGehee, “SNS Application Programming Plan”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP060, pp. XX-XX.
- J. Ferm?®, “Parameters of the Eigenellipsoid for Separated Sector Cyclotrons”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G1-09, pp. 461-463.
- D. T. Tran, “Focusing of an Alvarez Linac by Use of Magnetic Quadrupoles Oriented at 45o (Presented by M.G. Gilbaud)”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART3-6, pp. 309-327.
- G. Ascenção, M. Alves, L. Liu, and X. Resende, “Study of insertion devices effects in SIRIUS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM088, pp. 1184-1187.
- I. Will, “Drive Lasers for Photoinjectors”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 13, pp. XX-XX.
- J. E. Dusatko and J. D. Fox, “Ultra-Wideband Transverse Intra-Bunch Feedback: Beginning Development of a Next Generation 8GSa/s System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2001-2004.
- D. T. Palmer et al., “ORION: An Advanced Accelerator Facility at SLAC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH068, pp. 2251-2253.
- Y. R. Pan et al., “Post-mortem Analysis at TLS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC157, pp. 2352-2354.
- R. Steinbr??ck, M. Justus, M. Kuntzsch, T. Bergmann, and A. Kessler, “Trigger Generator for the Superconducting Linear Accelerator ELBE”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 46-48.
- T. J. Roberts and Y. Bao, “MuSim, A Graphical User Interface for Multiple Simulation Codes”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 535-537.
- J. B?ñhr et al., “Diagnostics for the Photon Injector Test Facility in Desy Zeuthen”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PS21, pp. XX-XX.
- S. Kawata, Y. Masubuchi, T. Sato, and T. Teramoto, “Development of Two-Dimensional Implosion Code for LIB ICF”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 706-709.
- T. Furukawa et al., “Beam Monitors of NIRS Fast Scanning System for Particle Therapy”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB51, pp. 182-185.
- D. Yu, J. Clendenin, Y. Luo, D. Newsham, D. Schultz, and A. V. Smirnov, “Development of a Polarized Electron Gun Based on an S-Band PWT Photoinjector”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB043, pp. 2129-2131.
- A. Blednykh, G. Bassi, V. V. Smaluk, and R. R. Lindberg, “A NUMERICAL STUDY OF THE MICROWAVE INSTABILITY AT APS”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 602-604.
- R. G. Marathe, V. Bhatnagar, P. Fatnani, R. K. Gupta, G. Singh, and D. S. Thakur, “Radiation Safety System for INDUS Accelerator Complex”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA032, pp. 148-150.
- J.-M. Godefroy, J. Polian, F. Ribeiro, and T. Ruan, “MOSFET RF Power Amplifier for Accelerator Applications”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP04A, pp. 1811-1813.
- R. I. Saban, “LHC Hardware Commissioning Summary”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOZDM01, pp. 56-60.
- P. Elleaume, “ESRF Insertion Devices”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1061-1064.
- B. T. Freemire et al., “High Pressure RF Cavity Test at Fermilab”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP032, pp. 160-162.
- C. Roderick and R. Billen, “The LSA Database to Drive the Accelerator Settings”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP006, pp. 417-419.
- L. Zeng et al., “Development of Analog Electronics for the Beam Loss Monitoring System in the Superconducting Section of the CSNS II Linac”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6627, this conference.
- T. Saeki et al., “R&D for the Post-EP Processes of Superconducting RF Cavity”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO085, pp. 824-828.
- P. Proudlock and H. W. Isch, “The Power Converters for the RF Klystrons of LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1209-1212.
- G. Stinson and P. Bricault, “A Proposal for an Additional Beamline to the TRIUMF ISAC Facility”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB024, pp. 1670-1672.
- L. E. Medina Medrano, R. Martin, R. Tomas, and F. Zimmermann, “Dynamic Aperture Studies for the FCC-ee”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 258-261.
- H. W. Isch, “The First Operational Experience of the LEP Power Converter Systems”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1203-1206.
- Q. Zhao, V. A. Andreev, J. Brandon, G. Machicoane, and F. Marti, “Experimental Studies of the ReA3 Triple-Harmonic Buncher”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP059, pp. 1686-1686.
- G. T. Konrad, “High Efficiency, CW, High Power Klystrons for Storage Ring Applications”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1249-1253.
- H. Zhang, J. Chen, R. Li, H. Huang, and L. Luo, “Development of the Electron Cooling Simulation Program for MEIC”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper TUPF02, pp. 101-103.
- J. Bradley III, D. Rees, R. Przeklasa, R. Jaitly, G. Schofield, and M. Scott, “Operational Experience with Two Types of 2 MW HVDC Power Supplies on LEDA”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP145, pp. 1010-1012.
- M. Ball, T. J. P. Ellison, and C. M. Fox, “New Nondestructive Beam Diagnostics for the IUCF Cyclotron Cooler”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-02, pp. 278-282.
- T. Asaka, H. Hanaki, A. Mizuno, S. Suzuki, T. Taniuchi, and K. Yanagida, “Results of SPring-8 RF Gun”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1A03, pp. 839-841.
- X. Serra-Gallifa, J. A. Avila-Abellan, J. J. Jamroz, and O. Matilla, “Em# Project. Improvement of Low Current Measurements at Alba Synchrotron”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC094, pp. 798-800.
- E. Noah, R. Catherall, Y. Kadi, C. Kharoua, J. Lettry, and T. Stora, “Driver Beam-led EURISOL Target Design Constraints”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC090, pp. 271-273.
- L. Tosi, D. Bulfone, E. Karantzoulis, M. Lonza, and V. Smaluk, “Diagnostics and Analysis of Instabilities with the Digital Transverse Multibunch Feedback at ELETTRA”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH314, pp. 2066-2068.
- Y. J. Li, K. Balewski, and W. Decking, “Dynamic Aperture Studies for PETRA III”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS021, pp. 3320-3322.
- J. Musson, C. Seaton, M. Spata, and J. Yan, “Application of Neural Network Algorithms for BPM Linearization”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG020, pp. 71-73.
- P. N. Prakash, D. Kanjilal, K. K. MISTRI, A. Roy, S. S. K. Sonti, and J. Zacharias, “Superconducting Niobium Resonator Fabrication And Testing At IUAC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA132, pp. 500-502.
- W. B. Ingalls, “Recent Operating Experience with the H- Ion Injector at LAMPF/LANSCE”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP24, pp. 704-706.
- H. Blosser and F. Resmini, “Invited Paper- Progress Report on the 500 MeV Superconducting Cyclotron”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3653-3659.
- G. Rodrigues, D. Kanjilal, P. Kumar, P. S. Lakshmy, and A. Mandal, “Operational Experience with the HTS-ECRIS, PKDELIS”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-17, pp. 107-110.
- S. Seletskiy, K. Mernick, L. Nguyen, P. Inacker, and R. Hulsart, “Feedbacks at Low Energy RHIC Electron Cooler”, presented at the 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, paper TUPCO27, unpublished.
- M. H. Nasr, M. Breidenbach, E. A. Nanni, and S. G. Tantawi, “Cryogenic-Copper Accelerating Structures: New Frontier for Beam Brightness, Efficiency and Cost-Capability”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper THVIR10, pp. XX-XX.
- H. Musfeldt, H. Kumpfert, and Dr. W. Schmidt, “A New Generation of High Power CW-Klystrons for Accelerator and Storage Ring Application, Practical Experience and Aspectrs for Future Developments”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2833-2836.
- M. Mu??oz, D. Einfeld, and Z. Mart?¡, “Effect of the Measured Magnetic Multipoles in the ALBA Lattice”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP070, pp. 3868-3870.
- I. Ashkenazi and G. E. Lahti, “Microprocessor Control for CEBAF RF Control Module”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1861-1864.
- D. Kuchler et al., “Operational Experience with the GTS-LHC Ion Source and Future Developments of the CERN Ion Injector”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper TUPP10, pp. 57-60.
- K. Johnson et al., “Streak Camera as a Diagnostic for High Intensity Cooled Bunched Beams”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1705-1708.
- B. E. Drendel, J. P. Morgan, and D. Vander Meulen, “Operating Procedure Changes to Improve Antiproton Production at the Fermilab Tevatron Collider”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP030, pp. 4832-4834.
- A. Burril and M. Poelker, “ERL07 Working Group 1 Summary: Electron Guns and Injector Designs”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 1, pp. 139-144.
- A. V. Aleksandrov, I. Hofmann, and J.-M. Lagniel, “Summary Report of the Working Group B: Beam Dynamics in High Intensity Linacs”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper CPL02, pp. 485-486.
- A. Marinelli and J. B. Rosenzweig, “Models of Space-Charge Induced Optical Micro-Bunching”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB50, pp. 512-515.
- K. Bongardt and M. Pabst, “Accelerator Physics of High Intensity Proton Linacs”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUY02A, pp. 158-162.
- C. Y. Kuo, C.-H. Chang, M.-H. Huang, C.-S. Hwang, J. C. Jan, and F.-Y. Lin, “Design and Performance of Various kinds of Corrector Magnets for the Taiwan Photon Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD014, pp. 3524-3526.
- D. K. Olsen et al., “HISTRAP Prototype Hardware Studies”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper C-04, pp. 70-75.
- V. Veshcherevich, S. A. Belomestnykh, W.-D. Moller, P. Quigley, J. J. Reilly, and J. Sears, “High Power Tests of First Input Couplers for Cornell ERL Injector Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS013, pp. 2355-2357.
- J. D. O et al., “BART: Development of a Sample Exchange System for MX Beamlines”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1919-1922.
- M. McMahan, B. Feinberg, D. Hubbard, and S. Meaney, “Stripping with a Fomblin Supersonic Jet at 112.5 keV/Nucleon”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-19, pp. 88-90.
- J. C. Schnuriger, “The 40 kA Dumping System for the ISR Beams”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1321-1324.
- S. Van der Schueren, R. De Maria, D. Gamba, and M. Migliorati, “Modeling and Measurements of the Impact of Dipole Fringe Fields in the Extra Low Energy Antiproton Ring”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper WEP5085, this conference.
- S. Leontein and E. Westlin, “Destructive Beam Profile Monitor Electronics using Gated Current Integrators”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP10E, pp. 1550-1552.
- S. Chemli et al., “The CERN Engineering Data Management System -A Status Report”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A01, pp. 2450-2452.
Back to search