Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Balcewicz, M. Blaskiewicz, and Y. Hao, “Multibunch Instabilities with Stepped Airbag Bunches”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPA055, unpublished.
[n] M. White et al., “Performance of the Advanced Photon Source (APS) Linear Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA11, pp. 1073-1075.
[n] V. Vlachodimitropoulos, M. J. Barnes, A. Chmielinska, L. Ducimeti?¿re, L. Vega Cid, and W. J. M. Weterings, “Studies Towards the New Beam Screen System of the LHC Injection Kicker Magnet for HL-LHC Operation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3982-3985. doi:10.18429/JACoW-IPAC2019-THPRB074
[n] F. Toral et al., “Design and Calculation of a Superferric Combined Magnet for XFEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS096, pp. 2598-2600.
[n] T. Primidis, V. Soloviev, and C. P. Welsch, “FLUKA and Geant4 Monte Carlo Simulations of a Desktop, Flat Panel Source Array for 3D Medical Imaging”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2483-2486. doi:10.18429/JACoW-IPAC2021-TUPAB409
[n] D. L. Kafkes and M. Schram, “Developing Robust Digital Twins and Reinforcement Learning for Accelerator Control Systems at the Fermilab Booster”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2268-2271. doi:10.18429/JACoW-IPAC2021-TUPAB327
[n] M. Fraser et al., “Upgrade of the PS booster-to-ISOLDE beam transfer line to facilitate an increase in proton driver energy”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3552-3555. doi:10.18429/JACoW-IPAC2024-THPR28
[n] Y. R. Lu et al., “400-kW RF Amplifier for a 201.5-MHz Deuteron RFQ Accelerator”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP041, pp. 670-672.
[n] B. Simons, J. Eldred, N. Banerjee, P. Piot, and V. Shiltsev, “Proposal for a proton-bunch compression experiment at IOTA in the strong space-charge regime”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 848-851. doi:10.18429/JACoW-IPAC2024-MOPS57
[n] J. C. Jan et al., “Design of a 3.5 T Superconducting Multipole Wiggler”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3564-3567. doi:10.18429/JACoW-IPAC2017-WEPVA127
[n] Ya. V. Shashkov, M. Gusarova, M. V. Lalayan, and N. Yu. Samarokov, “Accelerating Cavities with HOM Damping for USSR-4 Storage Ring”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 367-369. doi:10.18429/JACoW-RuPAC2021-WEPSC13
[n] B. C. Zhang et al., “Proposal of Peking University Superconducting Accelerator Facility (PKU-SCAF)”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ002, pp. 616-619.
[n] P. Michelato, S. Pace, M. Re, and P. Sarta, “Operational Experience of the K800 Cyclotron Vacuum System at L.N. S.”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2476-2479.
[n] M. T. Crofford, M. Champion, K.-U. Kasemir, H. Ma, and M. F. Piller, “Operational Experience with the Spallation Neutron Source High Power Protection Module”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT058, pp. 3411-3413.
[n] M.-E. Angoletta et al., “Beam Tests of a New Digital Beam Control System for the CERN LEIR Accelerator”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT019, pp. 1649-1651.
[n] M. Noll et al., “Characterizing optical synchrotron radiation in the geometric optical phase space and optimizing the energy transport to a photo detector”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2358-2360. doi:10.18429/JACoW-IPAC2024-WEPG58
[n] A. Kasparian et al., “AI-ready lattice representation and ML optimization for the BNL booster-to-AGS transfer line”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP6311, unpublished.
[n] V. J. Miller Kamm et al., “Software Tool Leverages Existing Image Analysis Results to Provide In-Situ Transmission of the NIF Disposable Debris Shields”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC083, pp. 1270-1273.
[n] I. Tapan, “Photon Diagnostic Station for TAC IR-FEL Test Facility”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA19, pp. 556-557.
[n] H. Ma, “NSLS-II Inject Linac RF Control Electronics Upgrade”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 516-518. doi:10.18429/JACoW-NAPAC2019-TUPLH18
[n] A. Chmielinska and M. J. Barnes, “New Spiral Beam Screen Design for the FCC-hh Injection Kicker Magnet”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 270-273. doi:10.18429/JACoW-IPAC2019-MOPGW074
[n] A. Mosnier et al., “MACSE Superconducting Cavity RF Drive System”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1064-1067.
[n] R. Sharankova, A. Shemyakin, and S. Rego, “Quantitative description and correction of longitudinal drifts in the Fermilab linac”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1964-1967. doi:10.18429/JACoW-IPAC2024-WEPC05
[n] J. Wan, S. Zhao, Y. Hao, W. Chang, and H. Ao, “Machine learning enabled model predictive control for the resonance frequency of the FRIB RFQ”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 338-340. doi:10.18429/JACoW-LINAC2024-TUPB007
[n] S. Saraf, N. Balakrishnan, and J. B. Greer, “Control Systems Design for LCLS-II Temperature Monitoring and Injector Equipment Protection System at SLAC”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper MOPHA127, pp. XX-XX.
[n] M. Heilmann et al., “Final Design of the FoS Alvarez-Cavity-Section for the Upgraded UNILAC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 920-923. doi:10.18429/JACoW-IPAC2018-TUPAF080
[n] R. A. Richardson, F. W. Chambers, S. Falabella, G. Guethlein, B. A. Raymond, and J. T. Weir, “Time Resolved X-Ray Spot Size Diagnostic”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT095, pp. 4302-4304.
[n] B. Riemann et al., “First Considerations Concerning an Optimized Cavity Design for the Main Linac of BERLinPro”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC080, pp. 259-261.
[n] M. Fouaidy, B. Aune, R. Brizzi, J. Gratadour, M. Juillard, and T. Junquera, “Thermal Model Calculations in Superconducting RF Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1304-1307.
[n] M. F. Piller, M. Champion, M. T. Crofford, L. R. Doolittle, and H. Ma, “The Spallation Neutron Source RF Reference System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT062, pp. 3573-3575.
[n] G. C. Pappas, D. Lu, M. Schram, and D. L. Vrabie, “Machine Learning for Improved Availability of the SNS Klystron High Voltage Converter Modulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4303-4306. doi:10.18429/JACoW-IPAC2021-THPAB252
[n] R. B. Deng, Y. Liu, L. Wang, and S. Xiang, “Vibration Measurements of Super-Conducting Undulator at SSRF”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1675-1677. doi:10.18429/JACoW-IPAC2017-TUPAB146
[n] W. Berg et al., “Status of the Advanced Photon Source (APS) Linear Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 605-608.
[n] G. Castro et al., “Results of the Optical Emission Spectroscopy diagnostics of the ESS proton source”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 107-110. doi:10.18429/JACoW-ECRIS2018-TUP12
For LaTeX
Use Complete Form
For BibTeX
References
- M. Balcewicz, M. Blaskiewicz, and Y. Hao, “Multibunch Instabilities with Stepped Airbag Bunches”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA055, unpublished.
- M. White et al., “Performance of the Advanced Photon Source (APS) Linear Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA11, pp. 1073-1075.
- V. Vlachodimitropoulos, M. J. Barnes, A. Chmielinska, L. Ducimeti?¿re, L. Vega Cid, and W. J. M. Weterings, “Studies Towards the New Beam Screen System of the LHC Injection Kicker Magnet for HL-LHC Operation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3982-3985.
- F. Toral et al., “Design and Calculation of a Superferric Combined Magnet for XFEL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS096, pp. 2598-2600.
- T. Primidis, V. Soloviev, and C. P. Welsch, “FLUKA and Geant4 Monte Carlo Simulations of a Desktop, Flat Panel Source Array for 3D Medical Imaging”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2483-2486.
- D. L. Kafkes and M. Schram, “Developing Robust Digital Twins and Reinforcement Learning for Accelerator Control Systems at the Fermilab Booster”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2268-2271.
- M. Fraser et al., “Upgrade of the PS booster-to-ISOLDE beam transfer line to facilitate an increase in proton driver energy”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR28, pp. 3552-3555.
- Y. R. Lu et al., “400-kW RF Amplifier for a 201.5-MHz Deuteron RFQ Accelerator”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP041, pp. 670-672.
- B. Simons, J. Eldred, N. Banerjee, P. Piot, and V. Shiltsev, “Proposal for a proton-bunch compression experiment at IOTA in the strong space-charge regime”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS57, pp. 848-851.
- J. C. Jan et al., “Design of a 3.5 T Superconducting Multipole Wiggler”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3564-3567.
- Ya. V. Shashkov, M. Gusarova, M. V. Lalayan, and N. Yu. Samarokov, “Accelerating Cavities with HOM Damping for USSR-4 Storage Ring”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 367-369.
- B. C. Zhang et al., “Proposal of Peking University Superconducting Accelerator Facility (PKU-SCAF)”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PZ002, pp. 616-619.
- P. Michelato, S. Pace, M. Re, and P. Sarta, “Operational Experience of the K800 Cyclotron Vacuum System at L.N. S.”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2476-2479.
- M. T. Crofford, M. Champion, K.-U. Kasemir, H. Ma, and M. F. Piller, “Operational Experience with the Spallation Neutron Source High Power Protection Module”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT058, pp. 3411-3413.
- M.-E. Angoletta et al., “Beam Tests of a New Digital Beam Control System for the CERN LEIR Accelerator”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT019, pp. 1649-1651.
- M. Noll et al., “Characterizing optical synchrotron radiation in the geometric optical phase space and optimizing the energy transport to a photo detector”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG58, pp. 2358-2360.
- A. Kasparian et al., “AI-ready lattice representation and ML optimization for the BNL booster-to-AGS transfer line”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP6311, this conference.
- V. J. Miller Kamm et al., “Software Tool Leverages Existing Image Analysis Results to Provide In-Situ Transmission of the NIF Disposable Debris Shields”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC083, pp. 1270-1273.
- I. Tapan, “Photon Diagnostic Station for TAC IR-FEL Test Facility”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA19, pp. 556-557.
- H. Ma, “NSLS-II Inject Linac RF Control Electronics Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 516-518.
- A. Chmielinska and M. J. Barnes, “New Spiral Beam Screen Design for the FCC-hh Injection Kicker Magnet”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 270-273.
- A. Mosnier et al., “MACSE Superconducting Cavity RF Drive System”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1064-1067.
- R. Sharankova, A. Shemyakin, and S. Rego, “Quantitative description and correction of longitudinal drifts in the Fermilab linac”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC05, pp. 1964-1967.
- J. Wan, S. Zhao, Y. Hao, W. Chang, and H. Ao, “Machine learning enabled model predictive control for the resonance frequency of the FRIB RFQ”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 338-340.
- S. Saraf, N. Balakrishnan, and J. B. Greer, “Control Systems Design for LCLS-II Temperature Monitoring and Injector Equipment Protection System at SLAC”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper MOPHA127, pp. XX-XX.
- M. Heilmann et al., “Final Design of the FoS Alvarez-Cavity-Section for the Upgraded UNILAC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 920-923.
- R. A. Richardson, F. W. Chambers, S. Falabella, G. Guethlein, B. A. Raymond, and J. T. Weir, “Time Resolved X-Ray Spot Size Diagnostic”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT095, pp. 4302-4304.
- B. Riemann et al., “First Considerations Concerning an Optimized Cavity Design for the Main Linac of BERLinPro”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC080, pp. 259-261.
- M. Fouaidy, B. Aune, R. Brizzi, J. Gratadour, M. Juillard, and T. Junquera, “Thermal Model Calculations in Superconducting RF Cavities”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1304-1307.
- M. F. Piller, M. Champion, M. T. Crofford, L. R. Doolittle, and H. Ma, “The Spallation Neutron Source RF Reference System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT062, pp. 3573-3575.
- G. C. Pappas, D. Lu, M. Schram, and D. L. Vrabie, “Machine Learning for Improved Availability of the SNS Klystron High Voltage Converter Modulators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4303-4306.
- R. B. Deng, Y. Liu, L. Wang, and S. Xiang, “Vibration Measurements of Super-Conducting Undulator at SSRF”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1675-1677.
- W. Berg et al., “Status of the Advanced Photon Source (APS) Linear Accelerator”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 605-608.
- G. Castro et al., “Results of the Optical Emission Spectroscopy diagnostics of the ESS proton source”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 107-110.
Back to search