Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Liu et al., “High-Power Test of a Compact X-Band RF Rotary Joint”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4017-4019. doi:10.18429/JACoW-IPAC2018-THPAL156
[n] J. Dietrich et al., “Status of the 2 MeV Electron Cooler for COSY/ HESR”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD067, pp. 843-845.
[n] E. Chiadroni et al., “Present and Perspectives of the Sparc THz Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS101, pp. 3669-3671.
[n] A. Calanna et al., “Proposal for a High Power Deuteron Cyclotron at RISP”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA06, pp. 45-47.
[n] A. Simonsson et al., “Status of DESIREE”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2379-2381. doi:10.18429/JACoW-IPAC2017-TUPVA123
[n] A. Lechner et al., “Power Deposition in LHC Magnets With and Without Dispersion Suppressor Collimators Downstream of the Betatron Cleaning Insertion”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 112-115. doi:10.18429/JACoW-IPAC2014-MOPRO021
[n] D. Marx, R. W. Assmann, R. T. P. D, and B. Marchetti, “Simulations of 3D Charge Density Measurements for Commissioning of the PolariX-TDS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1930-1933. doi:10.18429/JACoW-IPAC2018-WEPAF050
[n] G. Liu et al., “A CW High Charge State Heavy Ion RFQ Accelerator for SSC-LINAC Injector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP041, pp. 3826-3828.
[n] C. Wang et al., “A Study of Multipacting Effects in Large Cyclotron Cavities by Means of Fully 3-Dimensional Simulations”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU2PB01, pp. 142-146.
[n] A. Liu, “MICE Step IV Optics without the M1 Coil in SSD”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1553-1555. doi:10.18429/JACoW-IPAC2016-TUPMY006
[n] S. Rowan et al., “Qualification of the Bypass Continuity of the Main Dipole Magnet Circuits of the LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3141-3144. doi:10.18429/JACoW-IPAC2015-WEPHA017
[n] A. M. Valente et al., “Production and Performance of the First CEBAF Upgrade Cryomodule Intermediate Prototype”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP35, pp. 388-391.
[n] L. Ratner, A. V. Crewe, R. George, and L. C. Teng, “Experimental Area Beams from the ANL 12.5 BeV Proton Synchrotron”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 877-882.
[n] J. A. Holmes, M. H. Awida, J. Galambos, Y. W. Kang, J. L. Wilson, and Y. Zhang, “Investigation of Beam - RF Interactions in Twisted Waveguide Accelerating Structures Using Beam Tracking Codes”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE2PBC03, pp. 1855-1857.
[n] H. Jenhani et al., “Status of the test bench for the PIP-II LB650 cryomodules at CEA”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 655-658. doi:10.18429/JACoW-LINAC2024-THPB012
[n] H. H. Lu et al., “Development of the First U48 Undulator Prototype for the European X-ray Free Electron Laser”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper WEPB18, pp. 420-423.
[n] M. S. Liu, Y. L. Chi, S. Pei, and Y. F. Sui, “Electron Gun Longitudinal Jitter: Simulation and Analysis”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 297-299. doi:10.18429/JACoW-IPAC2015-MOPJE006
[n] B. E. Schultz, F. Ames, O. K. Kester, P. Kunz, A. Mj?©s, and J. F. Sandor, “FEBIAD Ion Source Development at TRIUMF-ISAC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4730-4733. doi:10.18429/JACoW-IPAC2018-THPML041
[n] H. Shi et al., “Fast Kicker and Pulser R&D for the HEPS on-Axis Injection System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2846-2849. doi:10.18429/JACoW-IPAC2018-WEPML069
[n] E. F. Valderrama et al., “Mo-Re Films for SRF Applications”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO077, pp. 930-935.
[n] N. Bazin et al., “Status of the IFMIF/EVEDA Superconducting Linac”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 735-741. doi:10.18429/JACoW-SRF2019-WETEA3
[n] S. M. Pattalwar et al., “Progress Report on the International Cryomodule at Daresbury”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper WG307, pp. 62-65.
[n] M. J. Forster et al., “CESR Control System Upgrade to Linux High Availability Cluster”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR015, pp. 3999-4001.
[n] A. Galat?á et al., “Upgrade and Commissioning of the PIAVE-ALPI ECR Injector at LNL”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper E-05, pp. 336-340.
[n] N. Karastathis, K. Fuchsberger, M. Hostettler, Y. Papaphilippou, and D. Pellegrini, “Crossing Angle Anti-Leveling at the LHC in 2017”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 184-187. doi:10.18429/JACoW-IPAC2018-MOPMF040
[n] J. Qiang and K. Hwang, “Modeling of Dark Current Generation and Transport Using the IMPACT-T Code”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 964-966. doi:10.18429/JACoW-NAPAC2016-WEPOB29
[n] R. O. Hettel et al., “Status of the PEP-X Light Source Design Study”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP114, pp. 2336-2338.
[n] G. Flanagan et al., “Evaluation and Implementation of High Performance Real-Time Signal Processing For Rayleigh Scattering Based Quench Detection for High Field Superconducting Magnets”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD041, pp. 3602-3604.
[n] U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Investigation of Structural Development in the Two-Step Diffusion Coating of Nb3Sn on Niobium”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 659-662. doi:10.18429/JACoW-NAPAC2016-WEB1CO02
[n] C. Zhang, L. Ma, G. Pei, and J. Q. Wang, “Construction and Commissioning of BEPCII”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO3RAI03, pp. 33-37.
[n] C. Bracco et al., “Experiments on the Margin of Beam Induced Quenches for LHC Superconducting Quadrupole Magnet in the LHC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC004, pp. 124-126.
[n] J. Smedley et al., “QE Measurements of a Nb-Pb SRF Photoinjector”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 11, pp. 95-98.
[n] M. Ishii et al., “A Data Acquisition System for Abnormal RF Waveform at SACLA”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 721-724. doi:10.18429/JACoW-ICALEPCS2015-WEPGF014
[n] S. Allison et al., “Active Vibration Suppression R+D for the Next Linear Collider”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH013, pp. 1261-1263.
[n] Y. Tao, K. Hwang, and J. Qiang, “Space charge effects of catch-up collision in a CW double-pass proton linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2429-2431. doi:10.18429/JACoW-IPAC2017-TUPVA140
[n] S. Lidia, S. De Santis, and T. Houck, “RF Systems for the Betatron Node Scheme Experiment at LBNL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH100, pp. 1005-1007.
[n] K. Skoufaris et al., “Numerical Optimization of DC Wire Compensation in HL-LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 570-573. doi:10.18429/JACoW-IPAC2019-MOPMP053
[n] D. Kramer, B. Dehning, C. Fischer, S. C. Hutchins, and J. Koopman, “Optical Design for BIPM Imaging System”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT007, pp. XX-XX.
[n] A. V. Zlobin, N. Andreev, E. Z. Barzi, V. V. Kashikhin, and I. Novitski, “DESIGN CONCEPT AND PARAMETERS OF A 15 T Nb3Sn DIPOLE DEMONSTRATOR FOR A 100 TEV HADRON COLLIDER”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3365-3367. doi:10.18429/JACoW-IPAC2015-WEPTY041
[n] A. V. Stephen et al., “Centralised Coordinated Control to Protect the JET ITER-like Wall.”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRAAULT04, pp. 1293-1296.
[n] J. Faure, “The New SATURNE Injector Status Report on the 750 keV Preinjector”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper D-2, pp. 240-250.
[n] T. Sakai et al., “Development of High Power Coherent Terahertz Wave Sources at Lebra 125 MeV Linac in Nihon University”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 78-80. doi:10.18429/JACoW-LINAC2018-MOPO024
[n] J. L. Abelleira, R. Tomas, F. Zimmermann, and H. Garcia, “Final-Focus Optics for the LHeC Electron Beam Line”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR023, pp. 1861-1863.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Liu et al., “High-Power Test of a Compact X-Band RF Rotary Joint”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4017-4019.
- J. Dietrich et al., “Status of the 2 MeV Electron Cooler for COSY/ HESR”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD067, pp. 843-845.
- E. Chiadroni et al., “Present and Perspectives of the Sparc THz Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS101, pp. 3669-3671.
- A. Calanna et al., “Proposal for a High Power Deuteron Cyclotron at RISP”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA06, pp. 45-47.
- A. Simonsson et al., “Status of DESIREE”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2379-2381.
- A. Lechner et al., “Power Deposition in LHC Magnets With and Without Dispersion Suppressor Collimators Downstream of the Betatron Cleaning Insertion”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 112-115.
- D. Marx, R. W. Assmann, R. T. P. D, and B. Marchetti, “Simulations of 3D Charge Density Measurements for Commissioning of the PolariX-TDS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1930-1933.
- G. Liu et al., “A CW High Charge State Heavy Ion RFQ Accelerator for SSC-LINAC Injector”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP041, pp. 3826-3828.
- C. Wang et al., “A Study of Multipacting Effects in Large Cyclotron Cavities by Means of Fully 3-Dimensional Simulations”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TU2PB01, pp. 142-146.
- A. Liu, “MICE Step IV Optics without the M1 Coil in SSD”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1553-1555.
- S. Rowan et al., “Qualification of the Bypass Continuity of the Main Dipole Magnet Circuits of the LHC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3141-3144.
- A. M. Valente et al., “Production and Performance of the First CEBAF Upgrade Cryomodule Intermediate Prototype”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP35, pp. 388-391.
- L. Ratner, A. V. Crewe, R. George, and L. C. Teng, “Experimental Area Beams from the ANL 12.5 BeV Proton Synchrotron”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 877-882.
- J. A. Holmes, M. H. Awida, J. Galambos, Y. W. Kang, J. L. Wilson, and Y. Zhang, “Investigation of Beam - RF Interactions in Twisted Waveguide Accelerating Structures Using Beam Tracking Codes”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE2PBC03, pp. 1855-1857.
- H. Jenhani et al., “Status of the test bench for the PIP-II LB650 cryomodules at CEA”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 655-658.
- H. H. Lu et al., “Development of the First U48 Undulator Prototype for the European X-ray Free Electron Laser”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper WEPB18, pp. 420-423.
- M. S. Liu, Y. L. Chi, S. Pei, and Y. F. Sui, “Electron Gun Longitudinal Jitter: Simulation and Analysis”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 297-299.
- B. E. Schultz, F. Ames, O. K. Kester, P. Kunz, A. Mj?©s, and J. F. Sandor, “FEBIAD Ion Source Development at TRIUMF-ISAC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4730-4733.
- H. Shi et al., “Fast Kicker and Pulser R&D for the HEPS on-Axis Injection System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2846-2849.
- E. F. Valderrama et al., “Mo-Re Films for SRF Applications”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO077, pp. 930-935.
- N. Bazin et al., “Status of the IFMIF/EVEDA Superconducting Linac”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 735-741.
- S. M. Pattalwar et al., “Progress Report on the International Cryomodule at Daresbury”, in Proc. 53th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'13), Novosibirsk, Russia, Sep. 2013, paper WG307, pp. 62-65.
- M. J. Forster et al., “CESR Control System Upgrade to Linux High Availability Cluster”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR015, pp. 3999-4001.
- A. Galat?á et al., “Upgrade and Commissioning of the PIAVE-ALPI ECR Injector at LNL”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper E-05, pp. 336-340.
- N. Karastathis, K. Fuchsberger, M. Hostettler, Y. Papaphilippou, and D. Pellegrini, “Crossing Angle Anti-Leveling at the LHC in 2017”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 184-187.
- J. Qiang and K. Hwang, “Modeling of Dark Current Generation and Transport Using the IMPACT-T Code”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 964-966.
- R. O. Hettel et al., “Status of the PEP-X Light Source Design Study”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP114, pp. 2336-2338.
- G. Flanagan et al., “Evaluation and Implementation of High Performance Real-Time Signal Processing For Rayleigh Scattering Based Quench Detection for High Field Superconducting Magnets”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD041, pp. 3602-3604.
- U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Investigation of Structural Development in the Two-Step Diffusion Coating of Nb3Sn on Niobium”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 659-662.
- C. Zhang, L. Ma, G. Pei, and J. Q. Wang, “Construction and Commissioning of BEPCII”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO3RAI03, pp. 33-37.
- C. Bracco et al., “Experiments on the Margin of Beam Induced Quenches for LHC Superconducting Quadrupole Magnet in the LHC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC004, pp. 124-126.
- J. Smedley et al., “QE Measurements of a Nb-Pb SRF Photoinjector”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 11, pp. 95-98.
- M. Ishii et al., “A Data Acquisition System for Abnormal RF Waveform at SACLA”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 721-724.
- S. Allison et al., “Active Vibration Suppression R+D for the Next Linear Collider”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH013, pp. 1261-1263.
- Y. Tao, K. Hwang, and J. Qiang, “Space charge effects of catch-up collision in a CW double-pass proton linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2429-2431.
- S. Lidia, S. De Santis, and T. Houck, “RF Systems for the Betatron Node Scheme Experiment at LBNL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH100, pp. 1005-1007.
- K. Skoufaris et al., “Numerical Optimization of DC Wire Compensation in HL-LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 570-573.
- D. Kramer, B. Dehning, C. Fischer, S. C. Hutchins, and J. Koopman, “Optical Design for BIPM Imaging System”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT007, pp. XX-XX.
- A. V. Zlobin, N. Andreev, E. Z. Barzi, V. V. Kashikhin, and I. Novitski, “DESIGN CONCEPT AND PARAMETERS OF A 15 T Nb3Sn DIPOLE DEMONSTRATOR FOR A 100 TEV HADRON COLLIDER”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3365-3367.
- A. V. Stephen et al., “Centralised Coordinated Control to Protect the JET ITER-like Wall.”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRAAULT04, pp. 1293-1296.
- J. Faure, “The New SATURNE Injector Status Report on the 750 keV Preinjector”, in Proc. 1968 Proton Linear Accelerator Conf. (LINAC'68), Long Island, NY, USA, May 1968, paper D-2, pp. 240-250.
- T. Sakai et al., “Development of High Power Coherent Terahertz Wave Sources at Lebra 125 MeV Linac in Nihon University”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 78-80.
- J. L. Abelleira, R. Tomas, F. Zimmermann, and H. Garcia, “Final-Focus Optics for the LHeC Electron Beam Line”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR023, pp. 1861-1863.
Back to search