Favourites
For Word
[n] M. Filtz, “Coupling Impedances of Muffin-Tin Structures with Closed and Open Sides”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPC28, pp. 2373-2375.
[n] H. Tochon-Danguy, G. Egan, J. I. Sachinidis, P. U, and B. Mukherjee, “Occupational Radiation Exposure at the Self-Shielded IBA cyclone 10/5 Cyclotron of the ARMC, Melbourne Australia”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-25, pp. 105-107.
[n] M. A. Zavialov, “Accelerators Application for Radiation Processing of Foodstuffs”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper FRCB03, pp. 470-472.
[n] P. Antonini et al., “Diagnostic Tool and Instrumentation for Handling 50 kW Beam Power”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 184-185. doi:10.18429/JACoW-Cyclotrons2016-TUP09
[n] D. E. Young, “Drift Tube Structures”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 6-01, pp. 204-220.
[n] M. A. Araya et al., “A New ACS Bulk Data Transfer Service for CTA”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1116-1120. doi:10.18429/JACoW-ICALEPCS2017-THBPL03
[n] M. V. Zdorovets, V. V. Alexandrenko, I. A. Ivanov, M. V. Koloberdin, and Y. K. Sambayev, “Accelerator Complex Based on DC-60 Cyclotron”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THCA01, pp. 287-289.
[n] M. G. Giacchini et al., “The Control System of SPES Target: Current Status and Perspectives.”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP086, pp. 278-280.
[n] U. Ratzinger and B. Schlitt, “Design of a Carbon Injector for a Medical Accelerator Complex”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP08C, pp. 2377-2382.
[n] A. Galat?á et al., “Towards the First Beams from the ADIGE Injector for the SPES Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3647-3649. doi:10.18429/JACoW-IPAC2019-THPGW030
[n] B. Mukherjee, “Research Applications of the Health Physics Surveillance System at the Australian National Medical Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-31, pp. 264-267.
[n] M. Filtz, “Analytical Calculation of Radiation in a Side Coupled mm-Wave Accelerating Structure”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP067G, pp. 1277-1279.
[n] D. Carbajo Perez et al., “Operational Feedback and Analysis of Current and Future Designs of the Injection Protection Absorbers in the Large Hadron Collider at CERN”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3517-3520. doi:10.18429/JACoW-IPAC2017-WEPVA108
[n] X. Yang, M. Li, W. Li, and X. J. Shu, “The FEL-THz Facility Driven by a Photo-cathode Injector”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUOD03, pp. 452-454.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Filtz, “Coupling Impedances of Muffin-Tin Structures with Closed and Open Sides”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPC28, pp. 2373-2375.
- H. Tochon-Danguy, G. Egan, J. I. Sachinidis, P. U, and B. Mukherjee, “Occupational Radiation Exposure at the Self-Shielded IBA cyclone 10/5 Cyclotron of the ARMC, Melbourne Australia”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-25, pp. 105-107.
- M. A. Zavialov, “Accelerators Application for Radiation Processing of Foodstuffs”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper FRCB03, pp. 470-472.
- P. Antonini et al., “Diagnostic Tool and Instrumentation for Handling 50 kW Beam Power”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 184-185.
- D. E. Young, “Drift Tube Structures”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 6-01, pp. 204-220.
- M. A. Araya et al., “A New ACS Bulk Data Transfer Service for CTA”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1116-1120.
- M. V. Zdorovets, V. V. Alexandrenko, I. A. Ivanov, M. V. Koloberdin, and Y. K. Sambayev, “Accelerator Complex Based on DC-60 Cyclotron”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THCA01, pp. 287-289.
- M. G. Giacchini et al., “The Control System of SPES Target: Current Status and Perspectives.”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP086, pp. 278-280.
- U. Ratzinger and B. Schlitt, “Design of a Carbon Injector for a Medical Accelerator Complex”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP08C, pp. 2377-2382.
- A. Galat?á et al., “Towards the First Beams from the ADIGE Injector for the SPES Project”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3647-3649.
- B. Mukherjee, “Research Applications of the Health Physics Surveillance System at the Australian National Medical Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-31, pp. 264-267.
- M. Filtz, “Analytical Calculation of Radiation in a Side Coupled mm-Wave Accelerating Structure”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP067G, pp. 1277-1279.
- D. Carbajo Perez et al., “Operational Feedback and Analysis of Current and Future Designs of the Injection Protection Absorbers in the Large Hadron Collider at CERN”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3517-3520.
- X. Yang, M. Li, W. Li, and X. J. Shu, “The FEL-THz Facility Driven by a Photo-cathode Injector”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUOD03, pp. 452-454.
Back to search