JaCoW Logo

Reference Search

Favourites


For Word

[n]	J. A. Carter et al., “Final Design of the APS-Upgrade Storage Ring Vacuum System”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 315-317. doi:10.18429/JACoW-NAPAC2019-TUYBB3
[n]	G. M. Wang, Y. Li, T. V. Shaftan, L. Yang, and L.-H. Yu, “NSLS-II Storage Ring Coupling Measurement and Correction”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1983-1985. doi:10.18429/JACoW-IPAC2015-TUPHA009
[n]	G. P. Averyanov, V. A. Budkin, A. V. Kobylyatskiy, and I. O. Osadchuk, “The Intelligent Object-oriented Interface in the Design Environment of The Charged Particles Relativistic Beams Transport Channels”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 358-360. doi:10.18429/JACoW-RUPAC2016-WEPSB004
[n]	S. P. Antipov, W. Gai, C.-J. Jing, A. Kanareykin, O. Poluektov, and P. Schoessow, “Development of a Dielectric-loaded Accelerating Structure with Built-in Tunable Absorption Mechanism for High Order Modes”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA045, pp. 3777-3779. 
[n]	J. Alessi et al., “Development of High Current Polarized H- Ion Sources at TRIUMF”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUO02B, pp. 290-292. 
[n]	C. D. P. Levy, P. W. Schmor, G. W. Wight, A. N. Zelenski, W. D. Ramsay, and W. T. H. van Oers, “Development of an Optically-Pumped Polarized H- Source for a Parity Nonconservation Experiment”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1444-1447. 
[n]	L. Emery, P. S. Kallakuri, D. Teytelman, and U. Wienands, “Precision Cavity Higher-Order Mode Tuning Scheme for Stabilizing the Stored Beam in the Advanced Photon Source Upgrade”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 670-672. doi:10.18429/JACoW-NAPAC2019-WEPLM04
[n]	J. F. Zhang et al., “Progresses of the ThomX High Level Control Applications based on MATLAB Middle Layer”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3125-3127. doi:10.18429/JACoW-IPAC2014-THPRO100
[n]	K. Fukami et al., “Novel iron lamination for fast kicker magnets with high flux density”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2631-2634. doi:10.18429/JACoW-IPAC2023-WEODC2
[n]	T. W. Markiewicz et al., “Functional Requirements on the Design of the Detectors and the Interaction Region of an e+e- Linear Collider with a Push-Pull Arrangement of Detectors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP078, pp. 2679-2681. 
[n]	A. N. Zelenski et al., “The TRIUMF High-Curent DC Optically -Pumped Polarized H- Ion Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPE03, pp. 864-866. 
[n]	S. Bilgen, V. Baglin, C. Bruni, B. Mercier, and G. Sattonnay, “Dynamic Pressure in the LHC - Influence of Ions Induced by Ionization of Residual Gas by Both the Proton Beam and the Electron Cloud”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1236-1239. doi:10.18429/JACoW-IPAC2019-TUPMP004
[n]	J. J. Kritzinger, A. M??ller, and H. A. Smit, “Experience with Electrical Contact Systems for Radio Frequencies at NAC”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-25, pp. 261-264. 
[n]	B. G. Chidley, F. P. Adams, G. E. McMichael, T. Tran Ngoc, and T. S. Bhatia, “New Vanes for RFQ1”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO402, pp. 42-44. 
[n]	A. A. Mikhailichenko, “Collection Optics with the Horn Type Focusing Element made with Separate Conductors”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD016, pp. 1443-1445. 
[n]	H. Jiang, S. Fu, C. Meng, J. Peng, and Y. Zou, “Beam Dynamics Analysis in the Beam Halo Experiments at IHEP”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3159-3161. doi:10.18429/JACoW-IPAC2014-THPRO112
[n]	S. M. Pruss et al., “Hybrid Permanent Quadrupoles for the 8 GeV Transfer Line at Fermilab”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P032, pp. 3286-3287. 
[n]	Y. Alexahin and E. Gianfelice-Wendt, “A 3 TeV Muon Collider Lattice Design”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC041, pp. 1254-1256. 
[n]	S. Bilgen, V. Baglin, C. Bruni, B. Mercier, and G. Sattonnay, “Dynamic Pressure in the LHC - Influence of Ions Induced by Ionization of Residual Gas by Both the Proton Beam and the Electron Cloud”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1236-1239. doi:10.18429/JACoW-IPAC2019-TUPMP004
[n]	T. H. Chong et al., “ECR ion source with high temperature superconducting REBCO coils”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1594-1596. doi:10.18429/JACoW-IPAC2023-TUPA123
[n]	M. Busch, M. Amberg, W. A. Barth, F. D. Dziuba, H. Podlech, and U. Ratzinger, “Superconducting CH-Cavity Development”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD032, pp. 753-755. 
[n]	G. P. Averyanov, V. A. Budkin, and I. O. Osadchuk, “Design Relativistic Charged Particle Beam Transportation Channels”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 355-357. doi:10.18429/JACoW-RUPAC2016-WEPSB003
[n]	P. W. Schmor, W. M. Law, C. D. P. Levy, and M. McDonald, “Initial Operating Experience and Recent Development on the TRIUMF Optically Pumped Polarized H- Ion Source”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1375-1378. 
[n]	A. A. Mikhailichenko, “To the Possibility of Bound States between Two Electrons”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP031, pp. 2792-2794. 
[n]	L. Serafini et al., “A European Proposal for the Compton Gamma-ray Source of ELI-NP”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUOBB01, pp. 1086-1088. 
[n]	H. S. Marks et al., “Improvement of a Wiggler by Single Axis Magnetic Measurement, Virtual Synthesis, and Relocation of Magnets”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC08, pp. 513-516. 
[n]	H. Yamaguchi et al., “DC septum magnet with low current density for the synchrotron light source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3646-3649. doi:10.18429/JACoW-IPAC2023-WEPM040
[n]	G. M. Wang et al., “NSLS-II Storage Ring Insertion Device and Front-End Commissioning”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1974-1976. doi:10.18429/JACoW-IPAC2015-TUPHA006
[n]	D. J. Seal et al., “First RF Measurements of Planar SRF Thin Films with a High Throughput Test Facility at Daresbury Laboratory”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1283-1286. doi:10.18429/JACoW-IPAC2022-TUPOTK033
[n]	D. Darvas, I. Majzik, and E. Blanco Vinuela, “What is Special About PLC Software Model Checking?”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1781-1786. doi:10.18429/JACoW-ICALEPCS2017-THPHA159
[n]	T. S. Bhatia, K. R. Crandall, R. W. Garnett, and G. H. Neuschaefer, “Error and Tolerance Estimates for the SSC CCL”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU416, pp. 344-346. 
[n]	R. G. Heine, K. Aulenbacher, S. Friederich, C. Matejcek, and F. Schlander, “Further Investigations on the MESA injector”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1515-1517. doi:10.18429/JACoW-IPAC2015-TUPWA045
[n]	M. T. Wilson, T. S. Bhatia, F. W. Guy, G. H. Neuschaefer, T. P. Wangler, and L. M. Young, “Accelerator for the Production of Tritium (APT)”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 761-764. 
[n]	H. Yonezawa, M. Katoh, T. Shigematsu, and K. Shikano, “A Small Cyclotron for Use in Ion Beam Analysis”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-14, pp. 646-649. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search