Favourites
For Word
[n] B. Langenbeck, B. Schillinger, and T. Weiland, “Ion Injection through Fringe Fields of Dipole Magnets”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP048G, pp. 1377-1379.
[n] J.-L. Fernandez-Hernando et al., “Material Damage Test for ILC Collimators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN072, pp. 2868-2870.
[n] J. C. Smith, L. Keller, S. A. Lundgren, and T. W. Markiewicz, “Construction and Bench Testing of a Rotatable Collimator for the LHC Collimation Upgrade”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB078, pp. 1701-1703.
[n] B. Wu, L. Cao, Q. Fu, P. Tan, and Y. Q. Xiong, “Comparison of the Detection Performance of Three Nonlinear Crystals for the Electro-optic Sampling of a FEL-THz Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2891-2893. doi:10.18429/JACoW-IPAC2014-THPRO017
[n] S. M. Polozov and E. S. Masunov, “3D Beam Dynamics Simulation in Undulator Linac”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP22, pp. 642-644.
[n] R. Bahl, S. K. Kumar, M. Mittal, B. Sarkar, and A. Shyam, “Development of a Neutronics Facility using Radio Frequency Quadrupole for Characterization of Fusion Grade Materials”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 981-984. doi:10.18429/JACoW-IPAC2016-MOPOY056
[n] R. Appleby, M. D. Salt, L. C. Deacon, and E. Gschwendtner, “Background and Energy Deposition Studies for the CLIC Post-Collision Line”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC028, pp. 1060-1062.
[n] T. H. Martin, “A Nominal One-Megavolt, Pulsed Power Generator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 104-106.
[n] B. D. Fell et al., “Mechanical Design of Collimators for the ILC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP168, pp. 2883-2885.
[n] U. Dorda and A. Fabich, “Implementation status of MYRRHA phase 1 (MINERVA)”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2617-2620. doi:10.18429/JACoW-IPAC2023-WEOGB3
[n] A. H. Lumpkin, W. J. Berg, M. Borland, J. W. Lewellen, and N. S. Sereno, “Initial CTR-Based Bunch Length Measurements of Linac Beams Following the APS Bunch Compressor”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB005, pp. 2420-2422.
[n] M. L. Chen et al., “The Installation and Operation of TPS Laser PSD System in TPS Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1123-1125. doi:10.18429/JACoW-IPAC2015-MOPTY079
[n] G. G. Gulbekyan et al., “Axial Injection Channel Of The Dc-350 Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 60-62.
[n] H. Rafique et al., “High Luminosity LHC Hollow Electron Lens Collimation using MERLIN”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 9-12. doi:10.18429/JACoW-ICAP2015-MODBC2
[n] S. T. Boogert, S. M. Gibson, R. Kwee-Hinzmann, L. J. Nevay, J. Snuverink, and L. C. Deacon, “Beam Delivery Simulation (BDSIM): A Geant4 Based Toolkit for Diagnostics and Loss Simulation”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC46, pp. 799-802.
[n] W. Y. Lai et al., “Alignment Design and Status of Taiwan Photon Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3212-3214. doi:10.18429/JACoW-IPAC2015-WEPHA044
[n] A. Apyan, L. C. Deacon, E. Gschwendtner, T. Lefevre, R. Appleby, and S. C. Tygier, “CLIC Luminosity Monitoring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR046, pp. 885-887.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Langenbeck, B. Schillinger, and T. Weiland, “Ion Injection through Fringe Fields of Dipole Magnets”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP048G, pp. 1377-1379.
- J.-L. Fernandez-Hernando et al., “Material Damage Test for ILC Collimators”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN072, pp. 2868-2870.
- J. C. Smith, L. Keller, S. A. Lundgren, and T. W. Markiewicz, “Construction and Bench Testing of a Rotatable Collimator for the LHC Collimation Upgrade”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB078, pp. 1701-1703.
- B. Wu, L. Cao, Q. Fu, P. Tan, and Y. Q. Xiong, “Comparison of the Detection Performance of Three Nonlinear Crystals for the Electro-optic Sampling of a FEL-THz Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2891-2893.
- S. M. Polozov and E. S. Masunov, “3D Beam Dynamics Simulation in Undulator Linac”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP22, pp. 642-644.
- R. Bahl, S. K. Kumar, M. Mittal, B. Sarkar, and A. Shyam, “Development of a Neutronics Facility using Radio Frequency Quadrupole for Characterization of Fusion Grade Materials”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 981-984.
- R. Appleby, M. D. Salt, L. C. Deacon, and E. Gschwendtner, “Background and Energy Deposition Studies for the CLIC Post-Collision Line”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC028, pp. 1060-1062.
- T. H. Martin, “A Nominal One-Megavolt, Pulsed Power Generator”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 104-106.
- B. D. Fell et al., “Mechanical Design of Collimators for the ILC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP168, pp. 2883-2885.
- U. Dorda and A. Fabich, “Implementation status of MYRRHA phase 1 (MINERVA)”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEOGB3, pp. 2617-2620.
- A. H. Lumpkin, W. J. Berg, M. Borland, J. W. Lewellen, and N. S. Sereno, “Initial CTR-Based Bunch Length Measurements of Linac Beams Following the APS Bunch Compressor”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB005, pp. 2420-2422.
- M. L. Chen et al., “The Installation and Operation of TPS Laser PSD System in TPS Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1123-1125.
- G. G. Gulbekyan et al., “Axial Injection Channel Of The Dc-350 Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 60-62.
- H. Rafique et al., “High Luminosity LHC Hollow Electron Lens Collimation using MERLIN”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 9-12.
- S. T. Boogert, S. M. Gibson, R. Kwee-Hinzmann, L. J. Nevay, J. Snuverink, and L. C. Deacon, “Beam Delivery Simulation (BDSIM): A Geant4 Based Toolkit for Diagnostics and Loss Simulation”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPC46, pp. 799-802.
- W. Y. Lai et al., “Alignment Design and Status of Taiwan Photon Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3212-3214.
- A. Apyan, L. C. Deacon, E. Gschwendtner, T. Lefevre, R. Appleby, and S. C. Tygier, “CLIC Luminosity Monitoring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR046, pp. 885-887.
Back to search