Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. Kamerdzhiev et al., “Commissioning of the 2MeV Electron Cooler for COSY / HESR”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD006, pp. 379-381.
[n] H. Jang, H. J. Kim, J. G. Hwang, and B. H. Oh, “Beam Dynamics Study for RAON Superconducting Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP080, pp. 239-241.
[n] C. Y. Yoshikawa et al., “Optimization of the Target Subsystem for the New g-2 Experiment”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD044, pp. 460-462.
[n] R. J. Abrams et al., “Conceptual Design of a Positron-annihilation System for Generation of Quasi-monochromatic Gamma Rays”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD033, pp. 1476-1478.
[n] A. E. Wheelhouse et al., “UK Industrial Development of Manufacturing Techniques for Superconducting RF Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2586-2588. doi:10.18429/JACoW-IPAC2014-WEPRI047
[n] A. Bertarelli, G. Arnau-Izquierdo, F. Carra, A. Dallocchio, M. Gil Costa, and N. Mariani, “Research and Development of Novel Advanced Materials for Next-generation Collimators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THOBB03, pp. 2888-2890.
[n] A. Pathak, “Linac_Gen: integrating machine learning and particle-in-cell methods for enhanced beam dynamics at Fermilab”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1695-1697. doi:10.18429/JACoW-IPAC2024-TUPS28
[n] M. Kireeff Covo, “Nondestructive Beam Current Monitor for the 88-inch Cyclotron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3738-3740. doi:10.18429/JACoW-IPAC2014-THPME195
[n] D. V. Neuffer, K. Yonehara, C. M. Ankenbrandt, and C. Y. Yoshikawa, “Use of Helical Transport Channels for Bunch Recombination”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC034, pp. 205-207.
[n] I. V. Leitao, “Development, Validation and Application of a Novel Method for Estimating the Thermal Conductance of Critical Interfaces in the Jaws of the LHC Collimation System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI060, pp. 3430-3432.
[n] T. T. Thakker and S. P. Jamison, “Effect of Active Fibre Stabilization on Group and Phase Delay”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD39, pp. 329-331.
[n] M. Borland et al., “The Upgrade of the Advanced Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2872-2877. doi:10.18429/JACoW-IPAC2018-THXGBD1
[n] V. Baglin et al., “The Secondary Electron Yield of Technical Materials and its Variaton with Surface Treatments”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THXF102, pp. 217-221.
[n] M. M. Paoluzzi et al., “Studies on a Wideband, Solid-state Driven RF System for the CERN PS Booster”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP011, pp. 3749-3751.
[n] D. Turner et al., “Characterization of Flat Multilayer Thin Film Superconductors”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 968-972. doi:10.18429/JACoW-SRF2019-THP048
[n] D. H. Chang, Y. W. Jun, B. H. Oh, and S. J. Hong, “Data Acquisition and Control System for the Prototype KSTAR NB Heating System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP520, pp. XX-XX.
[n] F. Jackson et al., “Electron Beam Dynamics in the ALICE IR-FEL Facility”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEPD42, pp. 464-467.
[n] Z. Liu, H. Cease, J. T. Collins, J. Nudell, and C. A. Preissner, “Optimization for the APS-U Magnet Support Structure”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 254-256. doi:10.18429/JACoW-MEDSI2016-TUPE44
[n] R. L. Stringall, J. V. Lebacqz, and D. L. Russell, “Klystrons for Accelerator Improvements”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 369-373.
[n] J. V. Lebacqz, “High Power Klystrons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 86-96.
[n] P. Goudket, S. R. Buckley, L. S. Cowie, A. E. Wheelhouse, and G. Burt, “Prototype Refinement of the VELA Transverse Deflecting Cavity Design”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI064, pp. 2842-2844.
[n] W. R. Flavell, “Functional Materials Development using Accelerator-based Light Sources: Current Capabilities and Future Prospects”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEIC04, pp. 2156-2160.
[n] P. Nama et al., “Effective thermal load mitigation in cERL injector coupler through warm section modification”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 778-781. doi:10.18429/JACoW-LINAC2024-THPB073
[n] M. Aicheler et al., “A Study of the Surface Quality of High Purity Copper after Heat Treatment”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS099, pp. 1771-1773.
[n] J. W. McKenzie et al., “Cavity Design for a S-Band Photoinjector RF Gun with 400 Hz Repetition Rate”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2983-2985. doi:10.18429/JACoW-IPAC2014-THPRO051
[n] J. A. Rodriguez et al., “30 GHz High-Gradient Accelerating Structure Test Results”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROBC01, pp. 3818-3820.
[n] A. E. Wheelhouse et al., “Commissioning of the Transverse Deflecting Cavity on VELA at Daresbury Laboratory”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3239-3241. doi:10.18429/JACoW-IPAC2015-WEPHA054
[n] R. Wegner et al., “Linac4 PIMS Construction and First Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4307-4310. doi:10.18429/JACoW-IPAC2017-THPIK094
[n] J. V. Lebacqz, “RF Sources Developments”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S6-1, pp. 327-335.
[n] B. Walasek-Hoehne et al., “CUPID: New System for Scintillating Screen Based Diagnostics”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPD06, pp. 417-420.
[n] W. Vodel, R. Geithner, R. Neubert, A. Peters, M. Schwickert, and P. Seidel, “An LTS SQUID-Based High Precision Measurement Tool for Nuclear Physics”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP046, pp. 3555-3557.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Kamerdzhiev et al., “Commissioning of the 2MeV Electron Cooler for COSY / HESR”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD006, pp. 379-381.
- H. Jang, H. J. Kim, J. G. Hwang, and B. H. Oh, “Beam Dynamics Study for RAON Superconducting Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP080, pp. 239-241.
- C. Y. Yoshikawa et al., “Optimization of the Target Subsystem for the New g-2 Experiment”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD044, pp. 460-462.
- R. J. Abrams et al., “Conceptual Design of a Positron-annihilation System for Generation of Quasi-monochromatic Gamma Rays”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD033, pp. 1476-1478.
- A. E. Wheelhouse et al., “UK Industrial Development of Manufacturing Techniques for Superconducting RF Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2586-2588.
- A. Bertarelli, G. Arnau-Izquierdo, F. Carra, A. Dallocchio, M. Gil Costa, and N. Mariani, “Research and Development of Novel Advanced Materials for Next-generation Collimators”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THOBB03, pp. 2888-2890.
- A. Pathak, “Linac_Gen: integrating machine learning and particle-in-cell methods for enhanced beam dynamics at Fermilab”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS28, pp. 1695-1697.
- M. Kireeff Covo, “Nondestructive Beam Current Monitor for the 88-inch Cyclotron”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3738-3740.
- D. V. Neuffer, K. Yonehara, C. M. Ankenbrandt, and C. Y. Yoshikawa, “Use of Helical Transport Channels for Bunch Recombination”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC034, pp. 205-207.
- I. V. Leitao, “Development, Validation and Application of a Novel Method for Estimating the Thermal Conductance of Critical Interfaces in the Jaws of the LHC Collimation System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI060, pp. 3430-3432.
- T. T. Thakker and S. P. Jamison, “Effect of Active Fibre Stabilization on Group and Phase Delay”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD39, pp. 329-331.
- M. Borland et al., “The Upgrade of the Advanced Photon Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2872-2877.
- V. Baglin et al., “The Secondary Electron Yield of Technical Materials and its Variaton with Surface Treatments”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THXF102, pp. 217-221.
- M. M. Paoluzzi et al., “Studies on a Wideband, Solid-state Driven RF System for the CERN PS Booster”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP011, pp. 3749-3751.
- D. Turner et al., “Characterization of Flat Multilayer Thin Film Superconductors”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 968-972.
- D. H. Chang, Y. W. Jun, B. H. Oh, and S. J. Hong, “Data Acquisition and Control System for the Prototype KSTAR NB Heating System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP520, pp. XX-XX.
- F. Jackson et al., “Electron Beam Dynamics in the ALICE IR-FEL Facility”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEPD42, pp. 464-467.
- Z. Liu, H. Cease, J. T. Collins, J. Nudell, and C. A. Preissner, “Optimization for the APS-U Magnet Support Structure”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 254-256.
- R. L. Stringall, J. V. Lebacqz, and D. L. Russell, “Klystrons for Accelerator Improvements”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 369-373.
- J. V. Lebacqz, “High Power Klystrons”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 86-96.
- P. Goudket, S. R. Buckley, L. S. Cowie, A. E. Wheelhouse, and G. Burt, “Prototype Refinement of the VELA Transverse Deflecting Cavity Design”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI064, pp. 2842-2844.
- W. R. Flavell, “Functional Materials Development using Accelerator-based Light Sources: Current Capabilities and Future Prospects”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEIC04, pp. 2156-2160.
- P. Nama et al., “Effective thermal load mitigation in cERL injector coupler through warm section modification”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 778-781.
- M. Aicheler et al., “A Study of the Surface Quality of High Purity Copper after Heat Treatment”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS099, pp. 1771-1773.
- J. W. McKenzie et al., “Cavity Design for a S-Band Photoinjector RF Gun with 400 Hz Repetition Rate”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2983-2985.
- J. A. Rodriguez et al., “30 GHz High-Gradient Accelerating Structure Test Results”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FROBC01, pp. 3818-3820.
- A. E. Wheelhouse et al., “Commissioning of the Transverse Deflecting Cavity on VELA at Daresbury Laboratory”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3239-3241.
- R. Wegner et al., “Linac4 PIMS Construction and First Operation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4307-4310.
- J. V. Lebacqz, “RF Sources Developments”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S6-1, pp. 327-335.
- B. Walasek-Hoehne et al., “CUPID: New System for Scintillating Screen Based Diagnostics”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPD06, pp. 417-420.
- W. Vodel, R. Geithner, R. Neubert, A. Peters, M. Schwickert, and P. Seidel, “An LTS SQUID-Based High Precision Measurement Tool for Nuclear Physics”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP046, pp. 3555-3557.
Back to search