Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Rusnak, P. Fitsos, M. Hall, P. Peaslee, and R. Souza, “A High-Intensity Neutron Production Source based on Rotary Valving”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA14, pp. 1385-1387.
[n] C. Liu et al., “Study of Orbit Correction for eRHIC FFAG Design”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2366-2368. doi:10.18429/JACoW-IPAC2015-TUPWI051
[n] H. Delsim-Hashemi et al., “Broadband Single Shot Spectrometer”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP029, pp. XX-XX.
[n] H. H. Lee et al., “A Simulation for the Optimization of Bremsstrahlung Radiation for Nuclear Applications Using Laser Accelerated Electron Beam”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPB13, pp. 618-621.
[n] C. Bontoiu, I. Martel, J. Sanchez-Segovia, R. Berjillos, and J. P. B. Perez, “Design of a Superconducting Gantry Cryostat”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3043-3045. doi:10.18429/JACoW-IPAC2015-WEPMN051
[n] M. Mu??oz, G. Benedetti, D. Einfeld, and Z. Mart?¡, “Predicted Effect of the Measured High Order Magnetic Multipole in the ALBA Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE077, pp. 4698-4700.
[n] K. Foraz et al., “Scheduling the Powering Tests”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP010, pp. 2545-2547.
[n] J. Moss and M. S. Champion, “Techniques for Achieving High Reliability Operation of the Spallation Neutron Source High Power Radio-Frequency System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 756-759. doi:10.18429/JACoW-IPAC2017-MOPIK098
[n] P. Lebasque et al., “Optimisation of the Coating Thickness on the Ceramic Chambers of the SOLEIL Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS102, pp. 3514-3516.
[n] R. G. Eichhorn et al., “Recent Findings on Nitrogen Treated Niobium”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP058, pp. 558-560.
[n] V. Derenchuk, D. L. Friesel, T. Sloan, and E. J. Stephenson, “Polarized Beam Performance of the IUCF CIPIOS, CIS, and Cooler Research Accelerator Facilities”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5B05, pp. 539-541.
[n] P. Ausset et al., “Operation of the Beam Position Monitor for the Spiral 2 Linac on the Test Bench of the RFQ”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 642-645. doi:10.18429/JACoW-IBIC2016-WEPG11
[n] T. Atkinson, E. Motuk, M. Ries, and M. Ulrich, “Orbit Measurements in the BESSY II Booster in Preparation for Quasi-Low-Alpha Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 146-148. doi:10.18429/JACoW-IPAC2017-MOPAB031
[n] H. T. Ren et al., “Commissioning of the FRIB RFQ”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1090-1093. doi:10.18429/JACoW-IPAC2018-TUPAL039
[n] J. D. Gonz?ílez Cobas et al., “Free and Open Source Software at CERN: Integration of Drivers in the Linux Kernel”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHMUST04, pp. 1248-1251.
[n] A. Z. Babaian et al., “Septum Magnet for Electron Extraction System at the Synchrotron EPI”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1491-1493.
[n] M. Ball et al., “Beam Property Measurements in the IUCF Cooler Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1770-1773.
[n] P. N. Ostroumov, J. D. Fuerst, M. P. Kelly, B. Mustapha, J. A. Nolen, and K. W. Shepard, “Accelerators for the Advanced Exotic Beam Facility in the U. S.”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS005, pp. 1664-1666.
[n] L. Gupta, S. Baturin, Y. K. Kim, and S. Nagaitsev, “Study of Integrable and Quasi-Integrable Sextupole Lattice”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 371-374. doi:10.18429/JACoW-IPAC2019-MOPGW107
[n] N. Fuster-Martinez et al., “Realistic Beam Halo Model study in the Extraction Line of ATF2”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2038-2041. doi:10.18429/JACoW-IPAC2015-TUPTY019
[n] L. Philippe, P. Gillette, and G. Normand, “User Interfaces for the Spiral2 Machine Protection System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC102, pp. 818-821.
[n] D. J. Thompson, “The SRA: Progress Report on the Dedicated Synchrotron Radiation Source at Daresbury; and Operation of a 600 MeV Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3803-3806.
[n] T. Wada, J. Fujita, T. Kambara, H. Kamitsubo, and H. Takebe, “Control System of the RIKEN Ring Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-01, pp. 407-409.
[n] D. Gordo, R. Carrasco Dominguez, I. Martel, A. R. Pinto G??mez, and C. Gomez, “High-performance Accelerating Cryomodule for the LINCE Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3298-3300. doi:10.18429/JACoW-IPAC2014-THPME035
For LaTeX
Use Complete Form
For BibTeX
References
- B. Rusnak, P. Fitsos, M. Hall, P. Peaslee, and R. Souza, “A High-Intensity Neutron Production Source based on Rotary Valving”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA14, pp. 1385-1387.
- C. Liu et al., “Study of Orbit Correction for eRHIC FFAG Design”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2366-2368.
- H. Delsim-Hashemi et al., “Broadband Single Shot Spectrometer”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP029, pp. XX-XX.
- H. H. Lee et al., “A Simulation for the Optimization of Bremsstrahlung Radiation for Nuclear Applications Using Laser Accelerated Electron Beam”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPB13, pp. 618-621.
- C. Bontoiu, I. Martel, J. Sanchez-Segovia, R. Berjillos, and J. P. B. Perez, “Design of a Superconducting Gantry Cryostat”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3043-3045.
- M. Mu??oz, G. Benedetti, D. Einfeld, and Z. Mart?¡, “Predicted Effect of the Measured High Order Magnetic Multipole in the ALBA Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE077, pp. 4698-4700.
- K. Foraz et al., “Scheduling the Powering Tests”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP010, pp. 2545-2547.
- J. Moss and M. S. Champion, “Techniques for Achieving High Reliability Operation of the Spallation Neutron Source High Power Radio-Frequency System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 756-759.
- P. Lebasque et al., “Optimisation of the Coating Thickness on the Ceramic Chambers of the SOLEIL Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS102, pp. 3514-3516.
- R. G. Eichhorn et al., “Recent Findings on Nitrogen Treated Niobium”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP058, pp. 558-560.
- V. Derenchuk, D. L. Friesel, T. Sloan, and E. J. Stephenson, “Polarized Beam Performance of the IUCF CIPIOS, CIS, and Cooler Research Accelerator Facilities”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5B05, pp. 539-541.
- P. Ausset et al., “Operation of the Beam Position Monitor for the Spiral 2 Linac on the Test Bench of the RFQ”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 642-645.
- T. Atkinson, E. Motuk, M. Ries, and M. Ulrich, “Orbit Measurements in the BESSY II Booster in Preparation for Quasi-Low-Alpha Operation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 146-148.
- H. T. Ren et al., “Commissioning of the FRIB RFQ”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1090-1093.
- J. D. Gonz?ílez Cobas et al., “Free and Open Source Software at CERN: Integration of Drivers in the Linux Kernel”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHMUST04, pp. 1248-1251.
- A. Z. Babaian et al., “Septum Magnet for Electron Extraction System at the Synchrotron EPI”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1491-1493.
- M. Ball et al., “Beam Property Measurements in the IUCF Cooler Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1770-1773.
- P. N. Ostroumov, J. D. Fuerst, M. P. Kelly, B. Mustapha, J. A. Nolen, and K. W. Shepard, “Accelerators for the Advanced Exotic Beam Facility in the U. S.”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS005, pp. 1664-1666.
- L. Gupta, S. Baturin, Y. K. Kim, and S. Nagaitsev, “Study of Integrable and Quasi-Integrable Sextupole Lattice”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 371-374.
- N. Fuster-Martinez et al., “Realistic Beam Halo Model study in the Extraction Line of ATF2”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2038-2041.
- L. Philippe, P. Gillette, and G. Normand, “User Interfaces for the Spiral2 Machine Protection System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC102, pp. 818-821.
- D. J. Thompson, “The SRA: Progress Report on the Dedicated Synchrotron Radiation Source at Daresbury; and Operation of a 600 MeV Booster”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3803-3806.
- T. Wada, J. Fujita, T. Kambara, H. Kamitsubo, and H. Takebe, “Control System of the RIKEN Ring Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-01, pp. 407-409.
- D. Gordo, R. Carrasco Dominguez, I. Martel, A. R. Pinto G??mez, and C. Gomez, “High-performance Accelerating Cryomodule for the LINCE Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3298-3300.
Back to search