Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Kamitsubo, “Invited Paper: Progress in RIKEN Ring Cyclotron Project”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper A-03, pp. 17-23.
[n] G.-Y. Hsiung, C.-K. Chan, C.-M. Cheng, C. Shueh, and R. Valizadeh, “Surface characterization of vacuum chambers with synchrotron radiation exposure at a beamline”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB005, unpublished.
[n] S. Sampayan et al., “Beam-Target Interaction Experiments for Bremsstrahlung Convertor Applications”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA96, pp. 1303-1305.
[n] M. Canetti et al., “Design, Manufacturing and Integration of LHC Cryostat Components: an Example of a Collaboration between CERN and Industry”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH169, pp. 3191-3193.
[n] S. Kwiatkowski, K. M. Baptiste, and J. Julian, “Klystron Efficiency Loop" for the ALS Storage Ring RF System"”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE083, pp. 2154-2156.
[n] J. J. Welch, S. DeBarger, P. Emma, N. Li, and J. Wu, “LCLS Compressor Dipole Field Quality and Beam Measurements”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH033, pp. 313-316.
[n] S. Chen, R. B. Hogan, A. Michalczyk, A. C. Starritt, and Y. E. Tan, “Hardware and Firmware Development for Enhanced Orbit Diagnostics at the Australian Synchrotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3802-3804. doi:10.18429/JACoW-IPAC2019-THPRB004
[n] C.-C. Chang, C.-K. Chan, and B.-Y. Chen, “Evaluation of coating thickness and thermal deposited power for nonlinear in-vacuum kicker”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB054, unpublished.
[n] D. Banerjee et al., “M2 Experimental Beamline Optics Studies for Next Generation Muon Beam Experiments at CERN”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4041-4044. doi:10.18429/JACoW-IPAC2021-THPAB143
[n] M. Aiba et al., “Beam Extraction of 150 MeV FFAG”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS076, pp. 1672-1674.
[n] V. Litvinenko, “Advances in Coherent Electron Cooling”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper THAM2HA02, pp. 175-183.
[n] J. Sheehan and H. Langenbach, “Power Supply Regulation by Microprocesser”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2876-2879.
[n] M. Hein, N. Klein, G. M??ller, H. Piel, and R. W. R?Âth, “Experiments on the RF Surface Resistance of the Perovskite Superconductors at 3 GHz”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87B04, pp. XX-XX.
[n] J. Crisp and J. Satti, “Fermilab Linac Upgrade Side Coupled Cavity Temperature Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3189-3192.
[n] M. Aoki et al., “DEVELOPMENT OF A MODEL 4 TESLA DIOPLE MAGNET”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper FRAU04, pp. XX-XX.
[n] K. Y. Ng, X. Huang, and S.-Y. Lee, “Analysis of emittance growth in the Fermilab Booster”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEBX06, pp. 271-273.
[n] L.-J. Chen et al., “Design and integration on the test station for PSM of a 300 kW transmitter”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1002-1004. doi:10.18429/JACoW-IPAC2023-MOPM013
[n] B. Farnham and R. Barillere, “Migration from OPC-DA to OPC-UA”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS025, pp. 374-377.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Kamitsubo, “Invited Paper: Progress in RIKEN Ring Cyclotron Project”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper A-03, pp. 17-23.
- G.-Y. Hsiung, C.-K. Chan, C.-M. Cheng, C. Shueh, and R. Valizadeh, “Surface characterization of vacuum chambers with synchrotron radiation exposure at a beamline”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB005, this conference.
- S. Sampayan et al., “Beam-Target Interaction Experiments for Bremsstrahlung Convertor Applications”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA96, pp. 1303-1305.
- M. Canetti et al., “Design, Manufacturing and Integration of LHC Cryostat Components: an Example of a Collaboration between CERN and Industry”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH169, pp. 3191-3193.
- S. Kwiatkowski, K. M. Baptiste, and J. Julian, “Klystron Efficiency Loop" for the ALS Storage Ring RF System"”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE083, pp. 2154-2156.
- J. J. Welch, S. DeBarger, P. Emma, N. Li, and J. Wu, “LCLS Compressor Dipole Field Quality and Beam Measurements”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH033, pp. 313-316.
- S. Chen, R. B. Hogan, A. Michalczyk, A. C. Starritt, and Y. E. Tan, “Hardware and Firmware Development for Enhanced Orbit Diagnostics at the Australian Synchrotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3802-3804.
- C.-C. Chang, C.-K. Chan, and B.-Y. Chen, “Evaluation of coating thickness and thermal deposited power for nonlinear in-vacuum kicker”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB054, this conference.
- D. Banerjee et al., “M2 Experimental Beamline Optics Studies for Next Generation Muon Beam Experiments at CERN”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4041-4044.
- M. Aiba et al., “Beam Extraction of 150 MeV FFAG”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS076, pp. 1672-1674.
- V. Litvinenko, “Advances in Coherent Electron Cooling”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper THAM2HA02, pp. 175-183.
- J. Sheehan and H. Langenbach, “Power Supply Regulation by Microprocesser”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2876-2879.
- M. Hein, N. Klein, G. M??ller, H. Piel, and R. W. R?Âth, “Experiments on the RF Surface Resistance of the Perovskite Superconductors at 3 GHz”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87B04, pp. XX-XX.
- J. Crisp and J. Satti, “Fermilab Linac Upgrade Side Coupled Cavity Temperature Control System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3189-3192.
- M. Aoki et al., “DEVELOPMENT OF A MODEL 4 TESLA DIOPLE MAGNET”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper FRAU04, pp. XX-XX.
- K. Y. Ng, X. Huang, and S.-Y. Lee, “Analysis of emittance growth in the Fermilab Booster”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEBX06, pp. 271-273.
- L.-J. Chen et al., “Design and integration on the test station for PSM of a 300 kW transmitter”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM013, pp. 1002-1004.
- B. Farnham and R. Barillere, “Migration from OPC-DA to OPC-UA”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS025, pp. 374-377.
Back to search