Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. V. Martyshkin and R. M. Lapik, “The Capture Efficiency of High Field Flux Concentrator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH301, pp. 2404-2405.
[n] T. J. Fessenden, D. Keefe, C. Kim, H. Meuth, and A. Warwick, “The LBL Multiple Beam Experiments”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 898-903.
[n] S. Bettoni et al., “Beam Manipulation Using Self-Induced Fields in the SwissFEL Injector”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3401-3404. doi:10.18429/JACoW-IPAC2018-THPAK074
[n] P. Gayet, J. Casas-Cubillos, P. Gomes, M. Pezzetti, C.-H. Sicard, and F. J. Varas, “Application of Object-based Industrial Controls for Cryogenics”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO030, pp. 2013-2015.
[n] J. Susta, “Development in Fabrication Methods”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-32, pp. XX-XX.
[n] L. Mekinda et al., “Securing Light Source SCADA Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1142-1148. doi:10.18429/JACoW-ICALEPCS2017-THBPA02
[n] M. A. Kostin et al., “Radiation Environment at ISOL Target Station of Rare Isotope Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS052, pp. 1766-1768.
[n] M. Punna, P. Chandra, S. V. Godambe, S. Mohanan, and P. Sridharan, “Automated Scheduler Software Based on Metro UI Design for MACE Telescope”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 814-818. doi:10.18429/JACoW-ICALEPCS2021-THAR03
[n] K. Wittenburg, “Experience with the Residual Gas Ionisation Beam Profile Monitors at the DESY Proton Accelerators”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1133-1136.
[n] R. J. Roussel, A. L. Edelen, J. P. Gonzalez-Aguilera, Y. K. Kim, and C. E. Mayes, “Bayesian Techniques for Accelerator Characterization and Control”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 791-796. doi:10.18429/JACoW-ICALEPCS2021-THAL02
[n] D. McGhee, J. Bogaty, and W. Praeg, “A 28 kV _ 0.025%, 200 kW DC Power Supply”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3746-3749.
[n] S. C. Joshi, N. Sharma, N. Kumar, S. Raghvendra, S. A. Pande, and G. V. Kane, “3D Thermal-Fluid Coupled Analysis for 350 MHz RFQ for Indian SNS Programme”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11016, pp. XX-XX.
[n] C. Charrondi?¿re, E. Chevallay, and T. Zilliox, “Challenges of Automating the Photocathode Fabrication Process at CERN”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 464-467. doi:10.18429/JACoW-ICALEPCS2021-TUPV032
[n] E. Tanke, S. Valero, P. Lapostolle, and A. M. Lombardi, “HERSC: A New 3 Dimensional Space Charge Routine for High Intensity Bunched Beams”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH424, pp. 656-658.
[n] M. Bree, T. Batten, C. W. Stevens, and J. M. Vogt, “Canadian Light Source Beam Position Visualization Tool”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 24-28. doi:10.18429/JACoW-IBIC2023-MO3C05
[n] J. Bosser et al., “Stability Conditions for a Neutralised Electron Cooling Beam”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAP23, pp. 2940-2942.
[n] A. Perin, S. D. Claudet, and R. van Weelderen, “Operational Experience with the LHC Superconducting Links and Evaluation of Possible Cryogenic Schemes for Future Remote Powering of Superconducting Magnets”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA073, pp. 3840-3842.
[n] S. F. Mikhailov et al., “Status of the Booster Synchrotron for Duke FEL Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAG006, pp. 2273-2275.
[n] L. Calabretta, A. Caruso, A. Spart?á, and E. Zappal?á, “The Radiofrequency Pulsing System at INFN-LNS”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-20, pp. XX-XX.
[n] L. V. Saturday et al., “Characterization and Analysis of Nanocrystalline Diamond as Stripper Foils”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper WEZBA4, unpublished.
[n] B. Mikulec et al., “Linac4 Beam Characterisation before Injection into the CERN PS Booster”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP055, pp. 4893-4895.
[n] Y. Wu, B. Burnham, and V. N. Litvinenko, “The Duke Storage Ring Control System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA10, pp. 2214-2216.
[n] G. Lambert et al., “Seeding the FEL of the SCSS Phase 1 Facility with the 13th Laser Harmonic of a Ti: Sa Laser Produced in Gas”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH002, pp. 44-46.
[n] J. Szewi et al., “Preliminary Design of LLRF System for Polfel Accelerator”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper TUPV024, unpublished.
[n] R. J. Weggel, B. J. King, and C. E. Pearson, “Design Study for 20 T, 15 cm Bore Hybrid Magnet with Radiation-Resistant Insert for Pion Capture”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH074, pp. 3398-3400.
[n] A. Perin, B. Bradu, J. Bremer, S. Claudet, D. Delikaris, and F. FERRAND, “Cryogenic eficiency and sustainability aspects for particle accelerators & detectors”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEBD1, unpublished.
[n] H. Stockhorst, M. Kuehn, H. Meuth, and J. Wei, “Longitudinal Phase Space Tracking of Particles in a Multiple Harmonic RF-System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 962-965.
[n] N. S. Azaryan et al., “Update of Classical Cyclotron U-150 Magnetic System. Simulation and Experiment”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC016, pp. 478-480.
[n] N. Rouvi re, “New Development in Undulator Vessels at E.S.R.F.”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP03D, pp. 2193-2195.
[n] A. I. Warwick, “Alumino-Silicate Ion Sources for Accelerator Applications”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1809-1812.
[n] M. Kilpatrick et al., “3D visualization and analysis of neutron scattering data in the control room”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3465-3468. doi:10.18429/JACoW-IPAC2024-THPG84
[n] T. Batten, “Industry Introductions”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper MO3I06, unpublished.
[n] K. E. McGee et al., “First N-Doping and Mid-T Baking of Medium-?ƒ 644 MHz 5-Cell Elliptical Superconducting RF Cavities for Michigan State University??s Facility for Rare Isotope Beams”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 53. doi:10.18429/JACoW-SRF2021-SUPCAV018
[n] A. Majid, D. A. Nawaz, N. U. Saqib, and F. Sher, “Automatic RF and Electron Gun Filament Conditioning Systems for 6 MeV LINAC”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 437-442. doi:10.18429/JACoW-ICALEPCS2021-TUPV020
For LaTeX
Use Complete Form
For BibTeX
References
- P. V. Martyshkin and R. M. Lapik, “The Capture Efficiency of High Field Flux Concentrator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH301, pp. 2404-2405.
- T. J. Fessenden, D. Keefe, C. Kim, H. Meuth, and A. Warwick, “The LBL Multiple Beam Experiments”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 898-903.
- S. Bettoni et al., “Beam Manipulation Using Self-Induced Fields in the SwissFEL Injector”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3401-3404.
- P. Gayet, J. Casas-Cubillos, P. Gomes, M. Pezzetti, C.-H. Sicard, and F. J. Varas, “Application of Object-based Industrial Controls for Cryogenics”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO030, pp. 2013-2015.
- J. Susta, “Development in Fabrication Methods”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-32, pp. XX-XX.
- L. Mekinda et al., “Securing Light Source SCADA Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1142-1148.
- M. A. Kostin et al., “Radiation Environment at ISOL Target Station of Rare Isotope Facility”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS052, pp. 1766-1768.
- M. Punna, P. Chandra, S. V. Godambe, S. Mohanan, and P. Sridharan, “Automated Scheduler Software Based on Metro UI Design for MACE Telescope”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 814-818.
- K. Wittenburg, “Experience with the Residual Gas Ionisation Beam Profile Monitors at the DESY Proton Accelerators”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1133-1136.
- R. J. Roussel, A. L. Edelen, J. P. Gonzalez-Aguilera, Y. K. Kim, and C. E. Mayes, “Bayesian Techniques for Accelerator Characterization and Control”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 791-796.
- D. McGhee, J. Bogaty, and W. Praeg, “A 28 kV _ 0.025%, 200 kW DC Power Supply”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3746-3749.
- S. C. Joshi, N. Sharma, N. Kumar, S. Raghvendra, S. A. Pande, and G. V. Kane, “3D Thermal-Fluid Coupled Analysis for 350 MHz RFQ for Indian SNS Programme”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11016, pp. XX-XX.
- C. Charrondi?¿re, E. Chevallay, and T. Zilliox, “Challenges of Automating the Photocathode Fabrication Process at CERN”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 464-467.
- E. Tanke, S. Valero, P. Lapostolle, and A. M. Lombardi, “HERSC: A New 3 Dimensional Space Charge Routine for High Intensity Bunched Beams”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH424, pp. 656-658.
- M. Bree, T. Batten, C. W. Stevens, and J. M. Vogt, “Canadian Light Source Beam Position Visualization Tool”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MO3C05, pp. 24-28.
- J. Bosser et al., “Stability Conditions for a Neutralised Electron Cooling Beam”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAP23, pp. 2940-2942.
- A. Perin, S. D. Claudet, and R. van Weelderen, “Operational Experience with the LHC Superconducting Links and Evaluation of Possible Cryogenic Schemes for Future Remote Powering of Superconducting Magnets”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA073, pp. 3840-3842.
- S. F. Mikhailov et al., “Status of the Booster Synchrotron for Duke FEL Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAG006, pp. 2273-2275.
- L. Calabretta, A. Caruso, A. Spart?á, and E. Zappal?á, “The Radiofrequency Pulsing System at INFN-LNS”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P4-20, pp. XX-XX.
- L. V. Saturday et al., “Characterization and Analysis of Nanocrystalline Diamond as Stripper Foils”, presented at the North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, paper WEZBA4, unpublished.
- B. Mikulec et al., “Linac4 Beam Characterisation before Injection into the CERN PS Booster”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP055, pp. 4893-4895.
- Y. Wu, B. Burnham, and V. N. Litvinenko, “The Duke Storage Ring Control System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA10, pp. 2214-2216.
- G. Lambert et al., “Seeding the FEL of the SCSS Phase 1 Facility with the 13th Laser Harmonic of a Ti: Sa Laser Produced in Gas”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH002, pp. 44-46.
- J. Szewi et al., “Preliminary Design of LLRF System for Polfel Accelerator”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper TUPV024, unpublished.
- R. J. Weggel, B. J. King, and C. E. Pearson, “Design Study for 20 T, 15 cm Bore Hybrid Magnet with Radiation-Resistant Insert for Pion Capture”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH074, pp. 3398-3400.
- A. Perin, B. Bradu, J. Bremer, S. Claudet, D. Delikaris, and F. FERRAND, “Cryogenic eficiency and sustainability aspects for particle accelerators & detectors”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEBD1, this conference.
- H. Stockhorst, M. Kuehn, H. Meuth, and J. Wei, “Longitudinal Phase Space Tracking of Particles in a Multiple Harmonic RF-System”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 962-965.
- N. S. Azaryan et al., “Update of Classical Cyclotron U-150 Magnetic System. Simulation and Experiment”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC016, pp. 478-480.
- N. Rouvi re, “New Development in Undulator Vessels at E.S.R.F.”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP03D, pp. 2193-2195.
- A. I. Warwick, “Alumino-Silicate Ion Sources for Accelerator Applications”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1809-1812.
- M. Kilpatrick et al., “3D visualization and analysis of neutron scattering data in the control room”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG84, pp. 3465-3468.
- T. Batten, “Industry Introductions”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MO3I06, unpublished.
- K. E. McGee et al., “First N-Doping and Mid-T Baking of Medium-?ƒ 644 MHz 5-Cell Elliptical Superconducting RF Cavities for Michigan State University??s Facility for Rare Isotope Beams”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 53.
- A. Majid, D. A. Nawaz, N. U. Saqib, and F. Sher, “Automatic RF and Electron Gun Filament Conditioning Systems for 6 MeV LINAC”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 437-442.
Back to search