Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Zobov et al., “Status Report on DAFNE Performance”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOXE02, pp. 43-47.
[n] A. De Santis et al., “Selected beam dynamics measurements at DAFNE”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM111, unpublished.
[n] S. Nagaitsev, “Progress Toward High Energy Electron Cooling”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAC002, pp. 715-719.
[n] F. Capoani, A. Bazzani, M. Giovannozzi, and A. I. Neishtadt, “Linear Coupling and Adiabaticity of Emittance Exchange”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1972-1975. doi:10.18429/JACoW-IPAC2021-TUPAB232
[n] A. De Santis et al., “Damping ring and transfer lines for FCCee Injector complex”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM112, unpublished.
[n] D. Newsham, Y. Luo, A. V. Smirnov, D. Yu, J. Zeng, and H. H. Braun, “Characterization of a PWT Photoinjector at Heavy Beam Loading”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH087, pp. 2293-2295.
[n] R. D. Ryne and K. Ko, “Terascale Computing in Accelerator Science and Technology”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOPL003, pp. 759-766.
[n] J. Shen, “Virtual Photon Impulse of Bunch, Beampipe Response, Coherent RF Beamstrahlung; and BEPC Bunch Length, BES Jam, Virtual Acceleration”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2438-2441.
[n] F. Capoani, A. Bazzani, and M. Giovannozzi, “Recent Progress on Nonlinear Beam Manipulations in Circular Accelerators”, in Proc. HB'21, Batavia, IL, USA, Oct. 2021, pp. 52-58. doi:10.18429/JACoW-HB2021-MOP08
[n] D. Yu, J. Clendenin, Y. Luo, and D. Newsham, “Parmela Simulations of a PWT Photoinjector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB042, pp. 2126-2128.
[n] A. V. Aleksandrov and C. Deibele, “Experimental Study of the SNS MEBT Chopper Performance”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD063, pp. 831-833.
[n] D. Yu, D. Newsham, and A. V. Smirnov, “PBG Cavities for Single-Beam and Multi-Beam Electron Devices”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE032, pp. 1153-1155.
[n] X. J. Liu, S. An, J. J. Chang, Y. Chen, J. Q. Wu, and W. Zhang, “Vacuum Control System of SSC-Linac”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 884-885. doi:10.18429/JACoW-ICALEPCS2017-TUPHA193
[n] D. Yu, G. Biallas, Y. Luo, D. Newsham, A. V. Smirnov, and R. Wines, “Short Multipole Magnet Designs for JLAB FEL Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB045, pp. 2135-2137.
[n] S. An, K. Gu, X. J. Liu, J. Q. Wu, and W. Zhang, “Use Interrupt Driven Mode to Redesign an IOC for Digital Power Supply at SSC-LINAC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 98-99. doi:10.18429/JACoW-ICALEPCS2015-MOPGF001
[n] L. Calabretta and D. Rifuggiato, “Status and Future Plans at LNS Catania”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper C-2, pp. XX-XX.
[n] F. Suzaki et al., “Performance of a Resonant Schottky Pick-up in the Commissioning of Rare-RI Ring”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA24, pp. 98-100.
[n] D. Yu et al., “Construction and Testing of a 21 GHz Ceramic Based Power Extractor”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE033, pp. 1156-1158.
[n] J. M. Jimenez, G. Arduini, and K. Weiss, “The SPS as a Vacuum Test Bench for Electron Cloud Studies with LHC Type Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAB006, pp. 685-687.
[n] R. K. Bhandari, “Status of the Calcutta K500 Superconduction Cyclotron Project”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper C-4, pp. XX-XX.
[n] F. E. Mills, “Early FFAG Development”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper D-1, pp. XX-XX.
[n] Isao Tanihata, “Role of Cyclotrons in Recent Nuclear Physics”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper A-1, pp. XX-XX.
[n] D. E. Johnson, A. Z. Chen, and I. Rakhno, “A Conceptual Design of an Internal Injection Absorber of 8 GeV H- Injection into the Fermilab Main Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS018, pp. 1694-1696.
[n] A. P. Zhukov and A. V. Aleksandrov, “High Resolution Emittance Measurements at SNS Front End”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB012, pp. 870-872.
[n] S. An, K. Gu, X. J. Liu, J. Q. Wu, and W. Zhang, “Implement an Interface for Control System to Interact with Oracle Database at SSC-LINAC”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC043, pp. 1171-1172.
[n] F. Jenni and L. Tanner, “Digital Control for Highest Precision Accelerator Power Supplies”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH010, pp. 3681-3683.
[n] Ya. V. Shashkov, N. P. Sobenin, and M. Zobov, “Comparision of Higher Order Modes Damping Techniques for Array of Single Cell Cavities”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB09, pp. 174-176.
[n] D. J. Clark, “Departed Cyclotron Pioneers”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper A-4, pp. XX-XX.
[n] F. Capoani, A. Bazzani, and M. Giovannozzi, “Analysis of a double-resonance crossing for beam splitting”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3325-3328. doi:10.18429/JACoW-IPAC2023-WEPL096
[n] L. G. Yan, D. R. Deng, P. Li, and D. Wu, “Performance Optimization of a Prototype Undulator U38 Using Multi-Objective Genetic Algorithm”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1353-1355. doi:10.18429/JACoW-IPAC2018-TUPMF045
[n] D. Yu et al., “Design of a DC/RF Photoelectron Gun”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB044, pp. 2132-2134.
[n] M. Zobov, “Crab Waist Approach: from DAFNE to SuperB”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUCHX03, pp. 6-10.
[n] F. Capoani, A. Bazzani, and M. Giovannozzi, “The adiabatic theory of the nonlinear coupling resonance crossing in circular accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3329-3332. doi:10.18429/JACoW-IPAC2023-WEPL097
[n] W. Scandale, “LHC Luminosity and Energy Upgrades”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUXPA03, pp. 910-914.
[n] N. V. Mokhov, “Particle Production and Radiation Environment at a Neutrino Factory Target Station”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAC010, pp. 745-747.
[n] S. Huang, S. BenLiang, Y. R. Lu, and K. Zhu, “Simulation of Plasma Window for Gas Target of Neutron Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB010, pp. 3251-3253.
[n] A. Mizrahi and L. Sch, “Optical Bragg Acceleration Structures”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP19018, pp. XX-XX.
[n] H. Jiang, P. Li, and T. G. Xu, “Measurements of Beam Halo by Wire Scanner Monitor”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 393-395. doi:10.18429/JACoW-IBIC2015-TUPB030
[n] D. Yu, G. Biallas, Y. Luo, D. Newsham, and A. V. Smirnov, “Wedge-Shaped, Large-Aperture, Dipole Magnet Design for the Jefferson Lab FEL Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB041, pp. 2123-2125.
[n] F. Capoani, A. Bazzani, and M. Giovannozzi, “Numerical simulations of transverse nonlinear beam manipulations at the CERN PS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3333-3336. doi:10.18429/JACoW-IPAC2023-WEPL098
For LaTeX
Use Complete Form
For BibTeX
References
- M. Zobov et al., “Status Report on DAFNE Performance”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOXE02, pp. 43-47.
- A. De Santis et al., “Selected beam dynamics measurements at DAFNE”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM111, unpublished.
- S. Nagaitsev, “Progress Toward High Energy Electron Cooling”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAC002, pp. 715-719.
- F. Capoani, A. Bazzani, M. Giovannozzi, and A. I. Neishtadt, “Linear Coupling and Adiabaticity of Emittance Exchange”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1972-1975.
- A. De Santis et al., “Damping ring and transfer lines for FCCee Injector complex”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM112, unpublished.
- D. Newsham, Y. Luo, A. V. Smirnov, D. Yu, J. Zeng, and H. H. Braun, “Characterization of a PWT Photoinjector at Heavy Beam Loading”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH087, pp. 2293-2295.
- R. D. Ryne and K. Ko, “Terascale Computing in Accelerator Science and Technology”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOPL003, pp. 759-766.
- J. Shen, “Virtual Photon Impulse of Bunch, Beampipe Response, Coherent RF Beamstrahlung; and BEPC Bunch Length, BES Jam, Virtual Acceleration”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2438-2441.
- F. Capoani, A. Bazzani, and M. Giovannozzi, “Recent Progress on Nonlinear Beam Manipulations in Circular Accelerators”, in Proc. 64th Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'21), Batavia, IL, USA, Oct. 2021, paper MOP08, pp. 52-58.
- D. Yu, J. Clendenin, Y. Luo, and D. Newsham, “Parmela Simulations of a PWT Photoinjector”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB042, pp. 2126-2128.
- A. V. Aleksandrov and C. Deibele, “Experimental Study of the SNS MEBT Chopper Performance”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD063, pp. 831-833.
- D. Yu, D. Newsham, and A. V. Smirnov, “PBG Cavities for Single-Beam and Multi-Beam Electron Devices”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE032, pp. 1153-1155.
- X. J. Liu, S. An, J. J. Chang, Y. Chen, J. Q. Wu, and W. Zhang, “Vacuum Control System of SSC-Linac”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 884-885.
- D. Yu, G. Biallas, Y. Luo, D. Newsham, A. V. Smirnov, and R. Wines, “Short Multipole Magnet Designs for JLAB FEL Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB045, pp. 2135-2137.
- S. An, K. Gu, X. J. Liu, J. Q. Wu, and W. Zhang, “Use Interrupt Driven Mode to Redesign an IOC for Digital Power Supply at SSC-LINAC”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 98-99.
- L. Calabretta and D. Rifuggiato, “Status and Future Plans at LNS Catania”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper C-2, pp. XX-XX.
- F. Suzaki et al., “Performance of a Resonant Schottky Pick-up in the Commissioning of Rare-RI Ring”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA24, pp. 98-100.
- D. Yu et al., “Construction and Testing of a 21 GHz Ceramic Based Power Extractor”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE033, pp. 1156-1158.
- J. M. Jimenez, G. Arduini, and K. Weiss, “The SPS as a Vacuum Test Bench for Electron Cloud Studies with LHC Type Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAB006, pp. 685-687.
- R. K. Bhandari, “Status of the Calcutta K500 Superconduction Cyclotron Project”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper C-4, pp. XX-XX.
- F. E. Mills, “Early FFAG Development”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper D-1, pp. XX-XX.
- Isao Tanihata, “Role of Cyclotrons in Recent Nuclear Physics”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper A-1, pp. XX-XX.
- D. E. Johnson, A. Z. Chen, and I. Rakhno, “A Conceptual Design of an Internal Injection Absorber of 8 GeV H- Injection into the Fermilab Main Injector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS018, pp. 1694-1696.
- A. P. Zhukov and A. V. Aleksandrov, “High Resolution Emittance Measurements at SNS Front End”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB012, pp. 870-872.
- S. An, K. Gu, X. J. Liu, J. Q. Wu, and W. Zhang, “Implement an Interface for Control System to Interact with Oracle Database at SSC-LINAC”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC043, pp. 1171-1172.
- F. Jenni and L. Tanner, “Digital Control for Highest Precision Accelerator Power Supplies”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH010, pp. 3681-3683.
- Ya. V. Shashkov, N. P. Sobenin, and M. Zobov, “Comparision of Higher Order Modes Damping Techniques for Array of Single Cell Cavities”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB09, pp. 174-176.
- D. J. Clark, “Departed Cyclotron Pioneers”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper A-4, pp. XX-XX.
- F. Capoani, A. Bazzani, and M. Giovannozzi, “Analysis of a double-resonance crossing for beam splitting”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL096, pp. 3325-3328.
- L. G. Yan, D. R. Deng, P. Li, and D. Wu, “Performance Optimization of a Prototype Undulator U38 Using Multi-Objective Genetic Algorithm”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1353-1355.
- D. Yu et al., “Design of a DC/RF Photoelectron Gun”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB044, pp. 2132-2134.
- M. Zobov, “Crab Waist Approach: from DAFNE to SuperB”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUCHX03, pp. 6-10.
- F. Capoani, A. Bazzani, and M. Giovannozzi, “The adiabatic theory of the nonlinear coupling resonance crossing in circular accelerators”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL097, pp. 3329-3332.
- W. Scandale, “LHC Luminosity and Energy Upgrades”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUXPA03, pp. 910-914.
- N. V. Mokhov, “Particle Production and Radiation Environment at a Neutrino Factory Target Station”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAC010, pp. 745-747.
- S. Huang, S. BenLiang, Y. R. Lu, and K. Zhu, “Simulation of Plasma Window for Gas Target of Neutron Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THEPPB010, pp. 3251-3253.
- A. Mizrahi and L. Sch, “Optical Bragg Acceleration Structures”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP19018, pp. XX-XX.
- H. Jiang, P. Li, and T. G. Xu, “Measurements of Beam Halo by Wire Scanner Monitor”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 393-395.
- D. Yu, G. Biallas, Y. Luo, D. Newsham, and A. V. Smirnov, “Wedge-Shaped, Large-Aperture, Dipole Magnet Design for the Jefferson Lab FEL Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB041, pp. 2123-2125.
- F. Capoani, A. Bazzani, and M. Giovannozzi, “Numerical simulations of transverse nonlinear beam manipulations at the CERN PS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL098, pp. 3333-3336.
Back to search