[n] P. Khodadoost, J. Dehghani, V. Moradi, M. Hashemi, A. Danaeifard, and Z. Azizi, “Girder and support system for the Iranian Light Source Facility”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM005, unpublished.
[n] V. Alexandrov, A. P. Sumbaev, N. Y. Kazarinov, and V. F. Shevtsov, “Calculation of Electron Beam Dynamics of the LUE-200 Accelerator”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP21, pp. 639-641.
[n] R. Monroy-Villa et al., “Commissioning of the UHH Quadrupole Resonator at DESY”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 952-959. doi:10.18429/JACoW-SRF2023-THCAA02
[n] J. G. Power, M. Borland, G. Decker, N. Sereno, K.-J. Kim, and X. W. Dong, “Potential for an Ultra-low Emittance Thermionic Triode Gun”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP109, pp. 989-991.
[n] J. S. Zhang et al., “Optimization Design of Four-Point Vibration Isolation Support for Spallation Neutron Source Vibration Magnet”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4352-4354. doi:10.18429/JACoW-IPAC2021-THPAB282
[n] M. Fraser et al., “Upgrade of the PS booster-to-ISOLDE beam transfer line to facilitate an increase in proton driver energy”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3552-3555. doi:10.18429/JACoW-IPAC2024-THPR28
[n] A. Halavanau et al., “LCLS Multi-Bunch Improvement Plan”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 365-368. doi:10.18429/JACoW-IPAC2021-MOPAB098
[n] T. Thuillier, O. Bajeat, A. Leduc, and L. Maunoury, “Angular Distribution Measurement of Atoms Evaporated from a Resistive Oven Applied to Ion Beam Production”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 72-77. doi:10.18429/JACoW-ECRIS2020-TUXZO03
[n] A. Ate, H. Hähnel, A. Michel, U. Ratzinger, and C. Wagner, “Raspberry Pi cameras as beam induced fluorescence monitors for low and high energy beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4692-4695. doi:10.18429/JACoW-IPAC2023-THPL100
[n] D. E. Anderson, “Recent Developments in Pulsed High-Power Systems”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TH2003, pp. 541-545.
[n] J. Keintzel, L. Malina, and R. Tom?ís Garc?¡a, “Momentum Compaction Factor Measurements in the Large Hadron Collider”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1360-1363. doi:10.18429/JACoW-IPAC2021-TUPAB011
[n] A. Vannozzi, D. Alesini, A. Giribono, and C. Vaccarezza, “Design and Realization of New Solenoids for High Brightness Electron Beam Injectors”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2374-2377. doi:10.18429/JACoW-IPAC2021-TUPAB366
[n] R. Costa, A. Latina, and M. Olvegaard, “Coupling between transverse and longitudinal beam dynamics in the first-stage CLIC decelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 784-787. doi:10.18429/JACoW-IPAC2023-MOPL097
[n] Y. He, Z. J. Wang, C. Xiao, W. Wu, and Y. Q. Yang, “The Optimization Design and Tolerance Analysis of DTL in SSC-INAC”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP064, pp. 557-559.
[n] A. M. Hoover, A. V. Aleksandrov, S. M. Cousineau, K. J. Ruisard, A. P. Shishlo, and A. P. Zhukov, “The Impact of High-Dimensional Phase Space Correlations on the Beam Dynamics in a Linear Accelerator”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 68-72. doi:10.18429/JACoW-HB2023-TUC1C2
[n] Y. Chung et al., “Beam Position Monitor Data Acquisition for the Advanced Photon Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1814-1817.
[n] B. Dalena and M. Ben Ghali, “A Machine Learning Technique for Dynamic Aperture Computation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4172-4175. doi:10.18429/JACoW-IPAC2021-THPAB201
[n] J. R. Ocampo, B. Bravo, F. P?®rez, A. Salom, P. Solans, and J. M. ?ülvarez, “Prototype Fabrication of an Active Normal Conducting Third Harmonic Cavity for the ALBA Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1542-1545. doi:10.18429/JACoW-IPAC2022-TUPOMS051
[n] J. Resta-Lopez, A. Foussat, C. Welsch, G. Kirby, I. Martel, and V. Rodin, “Design of a compact superconducting recoil separator for HIE-ISOLDE”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1450-1453. doi:10.18429/JACoW-IPAC2023-TUPA050
[n] Z. Shao, Z. Dong, T. Zhang, S. Dong, L. Wang, and Y. Lu, “Development progress of a tunable terahertz free electron laser based on a pre-bunched linear accelerator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 438-440. doi:10.18429/JACoW-IPAC2024-MOPG74
[n] G. Le Bec, “A Fast Non-Linear Model for the EBS Combined Sextupole-Corrector Magnets”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2381-2383. doi:10.18429/JACoW-IPAC2021-TUPAB369
[n] G. Geloni, M. Guetg, E. Schneidmiller, and S. Serkez, “Revision of optical klystron enhancement effects in self-amplified spontaneous emission free-electron lasers”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1849-1851. doi:10.18429/JACoW-IPAC2023-TUPL041
[n] N. Pietralla, R. Eichhorn, M. Konrad, U. Bonnes, and C. Burandt, “A Digital Low Level RF Control System for the S-DALINAC”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP091, pp. 268-270.
[n] P. Chen, “Disruption Effects from the Collision of Quasi-Flat Beams”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 617-620.
[n] M. D'Andrea et al., “Crystal collimation performance at the LHC with a 6.8 TeV proton beam”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 563-566. doi:10.18429/JACoW-IPAC2023-MOPL023
[n] J. W. Lewellen and YL. Li, “Generation of Ellipsoidal Beam Through 3-D Pulse Shaping of a Photoinjector Drive Laser”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP083, pp. 776-778.
[n] M. A. Kemp, D. E. Anderson, C. Burkhart, and M. N. Nguyen, “Next Generation IGBT Switch Plate Development for the SNS High Voltage Converter Modulator”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP096, pp. 1012-1014.
[n] A. M. Hoover, A. V. Aleksandrov, S. M. Cousineau, K. J. Ruisard, and A. P. Zhukov, “Measurements of the Five-Dimensional Phase Space Distribution of an Intense Ion Beam”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 910-913. doi:10.18429/JACoW-NAPAC2022-FRXD3
[n] R. Apsimon, K. A. Dewhurst, S. Setiniyaz, R. Seviour, D. A. Turner, and W. R. Wise, “RELIEF: Tanning of Leather with e-beam”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 645-649. doi:10.18429/JACoW-LINAC2022-WE2AA02
[n] Y. W. An, L. Huang, Z. P. Li, S. Y. Xu, and Y. S. Yuan, “Resonance Extraction Research Based on China Spallation Neutron Source”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 397-399. doi:10.18429/JACoW-HB2023-THAFP02
[n] U. Ratzinger, S. Minaev, and C. A. Kitegi, “The IH Cavity for HITRAP”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP10, pp. 54-56.
[n] K. J. Ruisard, A. V. Aleksandrov, S. M. Cousineau, A. M. Hoover, and A. P. Zhukov, “Model/Measurement Comparison of the Transverse Phase Space Distribution of an RFQ-Generated Bunch at the SNS BTF”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 584-587. doi:10.18429/JACoW-NAPAC2022-WEYE5
[n] C. Joly, J.-L. Biarrotte, and F. B. Bouly, “Low Level Radio-frequency Developments toward a Fault-tolerant Linac Scheme for an Accelerator Driven System”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP082, pp. 244-246.
[n] Z. Shao, T. Zhang, Z. Dong, S. Dong, L. Wang, and Y. Lu, “Research on key technologies for resonance injection of a compact X-ray light source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3816-3818. doi:10.18429/JACoW-IPAC2024-THPS36
[n] L. Gupta, A. L. Edelen, Y. K. Kim, C. E. Mayes, A. A. Mishra, and N. R. Neveu, “Measurement-Based Surrogate Model of the SLAC LCLS-II Injector”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3395-3398. doi:10.18429/JACoW-IPAC2021-WEPAB308
[n] D. J. Holder, “First Results from the ERL Prototype (ALICE) at Daresbury”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper WE103, pp. 694-698.
[n] L. Bandiera et al., “Study and optimization of an hybrid crystal-based positron source for the FCC-ee”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA085, unpublished.
[n] A. K. Orduz et al., “SPIRAL2 Final Commissioning Results”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 314-318. doi:10.18429/JACoW-LINAC2022-TU2AA02
[n] H. M. Churn, C. Benjamin, L. B. Jones, and T. C. Q. Noakes, “The Alkali-Metal Photocathode Preparation Facility at Daresbury Laboratory: First Caesium Telluride Deposition Results”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2693-2696. doi:10.18429/JACoW-IPAC2022-THPOPT044
[n] A. M. Lombardi, E. Zh. Sargsyan, R. Scrivens, V. Coco, and J. A. Chamings, “Acceleration of Several Charge States of Lead Ion in CERN LINAC3”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP27, pp. 351-353.
[n] S. Candela et al., “Laser powder bed fusion of pure niobium for particle accelerator applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4935-4938. doi:10.18429/JACoW-IPAC2023-THPM021
[n] H. Sun, B. Liu, and C. Feng, “High-gain free-electron laser with orbital angular momentum seeded by an x-ray regenerative amplifier”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1931-1934. doi:10.18429/JACoW-IPAC2023-TUPL081
Use Complete Form