Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. H. Lee et al., “Design Study of Low-Level RF Control System for CW Superconducting Electron Linear Accelerator in KAERI”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 512-515. doi:10.18429/JACoW-NAPAC2019-TUPLH17
[n] D. A. Gray, “Initial Operation of the SNS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2638-2643.
[n] M. Farkhondeh, K. A. Dow, W. W. Sapp, and D. R. Tieger, “Survey and Alignment of the MIT-Bates South Hall Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2938-2941.
[n] J. B. Flanz and C. P. Sargent, “Simulations of Half- and Third-Interger Resonant Extraction from a One-GeV Pulse Stretcher Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2444-2447.
[n] L. Dallin et al., “Gradient Dipole Magnets for the Canadian Light Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE054, pp. 2340-2342.
[n] S. Assadi, K. Junck, P. Colestock, and J. Marriner, “Inference of Wake Field Structure by Driving Longitudinal Coupled Bunch Modes in Main Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAB01, pp. 3016-3018.
[n] P. Zagrajek et al., “Bunch length measurement based on Cherenkov radiation spectrum at PolFEL”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL053, unpublished.
[n] G. Flucke et al., “Status of the Karabo Control and Data Processing Framework”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 938. doi:10.18429/JACoW-ICALEPCS2019-WECPR03
[n] I. Draganic, H. Andrews, J. Gioia, J. Hollabaugh, and M. Chavez, “High vacuum measurements at a linear inductive accelerator module”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR65, unpublished.
[n] H. R. Lee et al., “Optimization of Beam Parameters for UEM with Photo-Emission S-Band RF Gun and Alpha Magnet”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 440-442. doi:10.18429/JACoW-NAPAC2019-TUPLM33
[n] J. C. Bergstrom, H. S. Caplan, B. E. Norum, and R. V. Servranckx, “SORE- - A Pulse Stretcher for the Saskatchewan 300-MeV Linac”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3226-3229.
[n] V. G. Khachatryan, Y. L. Martirosyan, and A. Petrosyan, “Magnets for the CANDLE Booster Synchrotron, Design and Prototyping”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF002, pp. 1588-1590.
[n] M. Marich et al., “Design of High Dynamic Range Preamplifiers for a Diamond-Based Radiation Monitor System”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 216-219. doi:10.18429/JACoW-IBIC2022-TUP02
[n] M. Farkhondeh, K. A. Dow, W. W. Sapp, and J. D. Zumbro, “Magnetic Measurement, Fiducialization and Alignment of Large Dipoles for the MIT-Bates SHR”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2941-2944.
[n] A. A. S. Awwal et al., “Image Processing Alignment Algorithms for the Optical Thomson Scattering Laser at the National Ignition Facility”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 528-533. doi:10.18429/JACoW-ICALEPCS2021-WEAL01
[n] M. Molodtsova, A. Philipp, and E. Ritter, “Characterization of the 2.45 GHz DREEBIT ECRIS via optical spectroscopy”, in Proc. ECRIS'24, Darmstadt, Germany, Sep. 2024, pp. 31-34. doi:10.18429/JACoW-ECRIS2024-MOP01
[n] S. Tunyan, G. A. Amatuni, and B. Grigoryan, “Temperature Regulation of the Accelerating Section in CANDLE Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE014, pp. 1416-1418.
[n] J. W. G. Thomason, R. Sidlow, and M. O. Whitehead, “Performance of the H minus Ion Source Development Rig at RAL”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI012, pp. 1738-1740.
[n] N. Hauser, S. Wimalaratne, and C. U. Felzmann, “ANSTO, Australian Synchrotron, Metadata Catalogues and the Australian National Data Service”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUMIB05, pp. 529-531.
[n] S. C. Schaller et al., “Completion of the LANSCE Proton Storage Ring Control System Upgrade - A Successful Integration of EPICS into a Running Control System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P045, pp. 2464-2466.
[n] O. Calvo, G. Tool, and D. Wolff, “Magnet Current Regulation in the SSC”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1458-1461.
[n] A. Ratkus et al., “Initial high electric field – vacuum arc breakdown test results for additively manufactured pure copper electrodes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4957-4959. doi:10.18429/JACoW-IPAC2023-THPM030
[n] M. Kreller, T. Knie?ƒ, and S. Preusche, “The Cyclotron TR-FLEX at the Center for Radiopharmaceutical Cancer Research at Helmholtz-Zentrum Dresden-Rossendorf”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 166-168. doi:10.18429/JACoW-CYCLOTRONS2019-TUP008
[n] M. Ratzlaff and D. Beauregard, “Beam centroid studies at the Canadian Light Source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1243-1245. doi:10.18429/JACoW-IPAC2024-TUPG14
[n] F. Locci, J. P. Palluel, F. Ehm, L. Gallerani, J. Lauener, and R. Voirin, “CERN Controls Open Source Monitoring System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 403. doi:10.18429/JACoW-ICALEPCS2019-MOPHA085
[n] L. J. Nevay et al., “Sub-Micrometre Resolution Laserwire Transverse Beam Size Measurement System”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF16, pp. 243-246.
[n] K. W. Shepard, Z. A. Conway, J. D. Fuerst, M. Kedzie, and M. P. Kelly, “Prototype Superconducting Triple-Spoke Cavity for Beta = 0.63”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT099, pp. 4338-4340.
[n] J. John et al., “Harmonic Cascade FEL Designs for LUX, a Facilty for Ultrafast X-ray Science”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS51, pp. XX-XX.
[n] M. A. Oothoudt, C. Pillai, and M. V. Zumbro, “Automatic Beam Position Control at LASREF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P044, pp. 2064-2066.
[n] T. Torims et al., “Perspectives and recent achievements on additive manufacturing technologies for accelerators”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3890-3892. doi:10.18429/JACoW-IPAC2024-THPS62
For LaTeX
Use Complete Form
For BibTeX
References
- S. H. Lee et al., “Design Study of Low-Level RF Control System for CW Superconducting Electron Linear Accelerator in KAERI”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 512-515.
- D. A. Gray, “Initial Operation of the SNS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2638-2643.
- M. Farkhondeh, K. A. Dow, W. W. Sapp, and D. R. Tieger, “Survey and Alignment of the MIT-Bates South Hall Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2938-2941.
- J. B. Flanz and C. P. Sargent, “Simulations of Half- and Third-Interger Resonant Extraction from a One-GeV Pulse Stretcher Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2444-2447.
- L. Dallin et al., “Gradient Dipole Magnets for the Canadian Light Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE054, pp. 2340-2342.
- S. Assadi, K. Junck, P. Colestock, and J. Marriner, “Inference of Wake Field Structure by Driving Longitudinal Coupled Bunch Modes in Main Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAB01, pp. 3016-3018.
- P. Zagrajek et al., “Bunch length measurement based on Cherenkov radiation spectrum at PolFEL”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL053, unpublished.
- G. Flucke et al., “Status of the Karabo Control and Data Processing Framework”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 938.
- I. Draganic, H. Andrews, J. Gioia, J. Hollabaugh, and M. Chavez, “High vacuum measurements at a linear inductive accelerator module”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR65, unpublished.
- H. R. Lee et al., “Optimization of Beam Parameters for UEM with Photo-Emission S-Band RF Gun and Alpha Magnet”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 440-442.
- J. C. Bergstrom, H. S. Caplan, B. E. Norum, and R. V. Servranckx, “SORE- - A Pulse Stretcher for the Saskatchewan 300-MeV Linac”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3226-3229.
- V. G. Khachatryan, Y. L. Martirosyan, and A. Petrosyan, “Magnets for the CANDLE Booster Synchrotron, Design and Prototyping”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF002, pp. 1588-1590.
- M. Marich et al., “Design of High Dynamic Range Preamplifiers for a Diamond-Based Radiation Monitor System”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 216-219.
- M. Farkhondeh, K. A. Dow, W. W. Sapp, and J. D. Zumbro, “Magnetic Measurement, Fiducialization and Alignment of Large Dipoles for the MIT-Bates SHR”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2941-2944.
- A. A. S. Awwal et al., “Image Processing Alignment Algorithms for the Optical Thomson Scattering Laser at the National Ignition Facility”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 528-533.
- M. Molodtsova, A. Philipp, and E. Ritter, “Characterization of the 2.45 GHz DREEBIT ECRIS via optical spectroscopy”, in Proc. 26th International Workshop on ECR Ion Sources (ECRIS'24), Darmstadt, Germany, Sep. 2024, pp. 31-34.
- S. Tunyan, G. A. Amatuni, and B. Grigoryan, “Temperature Regulation of the Accelerating Section in CANDLE Linac”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE014, pp. 1416-1418.
- J. W. G. Thomason, R. Sidlow, and M. O. Whitehead, “Performance of the H minus Ion Source Development Rig at RAL”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI012, pp. 1738-1740.
- N. Hauser, S. Wimalaratne, and C. U. Felzmann, “ANSTO, Australian Synchrotron, Metadata Catalogues and the Australian National Data Service”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUMIB05, pp. 529-531.
- S. C. Schaller et al., “Completion of the LANSCE Proton Storage Ring Control System Upgrade - A Successful Integration of EPICS into a Running Control System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P045, pp. 2464-2466.
- O. Calvo, G. Tool, and D. Wolff, “Magnet Current Regulation in the SSC”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1458-1461.
- A. Ratkus et al., “Initial high electric field – vacuum arc breakdown test results for additively manufactured pure copper electrodes”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM030, pp. 4957-4959.
- M. Kreller, T. Knie?ƒ, and S. Preusche, “The Cyclotron TR-FLEX at the Center for Radiopharmaceutical Cancer Research at Helmholtz-Zentrum Dresden-Rossendorf”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 166-168.
- M. Ratzlaff and D. Beauregard, “Beam centroid studies at the Canadian Light Source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG14, pp. 1243-1245.
- F. Locci, J. P. Palluel, F. Ehm, L. Gallerani, J. Lauener, and R. Voirin, “CERN Controls Open Source Monitoring System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 403.
- L. J. Nevay et al., “Sub-Micrometre Resolution Laserwire Transverse Beam Size Measurement System”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF16, pp. 243-246.
- K. W. Shepard, Z. A. Conway, J. D. Fuerst, M. Kedzie, and M. P. Kelly, “Prototype Superconducting Triple-Spoke Cavity for Beta = 0.63”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT099, pp. 4338-4340.
- J. John et al., “Harmonic Cascade FEL Designs for LUX, a Facilty for Ultrafast X-ray Science”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS51, pp. XX-XX.
- M. A. Oothoudt, C. Pillai, and M. V. Zumbro, “Automatic Beam Position Control at LASREF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P044, pp. 2064-2066.
- T. Torims et al., “Perspectives and recent achievements on additive manufacturing technologies for accelerators”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS62, pp. 3890-3892.
Back to search