JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Farkhondeh et al., “Magnetic Septa Design and Performance for Injection and Extraction to and from the MIT-Bates South Hall Ring (SHR)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2868-2871. 
[n]	M. Vanwelde, C. Hernalsteens, E. Ramoisiaux, E. Gnacadja, N. Pauly, and R. Tesse, “Conceptual lattice design for vertical fixed field medical accelerators”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5095-5098. doi:10.18429/JACoW-IPAC2023-THPM093
[n]	J. C. Dooling et al., “Collimation and Machine Protection for Low Emittance Rings”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 196-201. doi:10.18429/JACoW-IBIC2022-TU2T1
[n]	A. Hanuka, “Accurate and Confident Prediction of Electron Beam Longitudinal Properties Using Spectral Virtual Diagnostics”, presented at the IPAC'22, Bangkok, Thailand, Jun. 2022, paper TUIXGD1, unpublished. 
[n]	Z. Dong, Y. Tian, and Y. Sun, “Adaptive model-based reinforcement learning for orbit feedback control in NSLS-II storage ring”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1885-1892. doi:10.18429/JACoW-ICALEPCS2025-FRAG004
[n]	A. I. Papash, G. A. Karamysheva, and L. M. Onischenko, “Compact Superconducting Synchrocyclotrons at Magnetic Field Level of up to 10 T for Proton and Carbon Therapy”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THPSC037, pp. 393-395. 
[n]	W. H. Tan, P. Piot, and A. Zholents, “Start-to-End Simulation of the Drive-Beam Longitudinal Dynamics for Beam-Driven Wakefield Acceleration”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 858-861. doi:10.18429/JACoW-NAPAC2019-WEPLO06
[n]	T. Konomi, “Overview on Worldwide Development of SRF-Gun Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper THOTEV01, pp.. 
[n]	E. Bulyak, “Ion Driven Effects in the Intence Electron Beam Circulating in Storage Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPA13, pp. 3226-3228. 
[n]	D. Wang, B. Binns, M. Kogan, and A. Zolfaghari, “Wire Setup Calibration of Beam Position Monitors”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB04, pp. 2536-2538. 
[n]	A. Warner, K. Carlson, G. M. Kazakevich, L. R. Prost, and M. Sutherland, “Electron Beam Temperature Measurements at the Fermilab Medium Energy Electron Cooler”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB18, pp. 268-270. 
[n]	Y.-S. Kim et al., “AC Power Supply for Wobbler Magnet of the MC-50 Cyclotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE062, pp. 3576-3578. 
[n]	K. Okamura, H. Kamezaki, and K. Takayama, “Development of a Fast-feedback Deflector Magnet Power Supply for The Next Generation Heavy Ion Therapy”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP7666, unpublished. 
[n]	F. O. Purser, K. R. Crandall, J. M. Potter, O. R. Sander, and E. A. Wadlinger, “Operating Characteristics of a 2.0-MeV RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3582-3585. 
[n]	Z. Yang, X. Liu, X. Lu, C. Tang, and L. Yan, “A high-peak-power, phase-stabilized laser system for quasi-steady-state microbunching”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM097, unpublished. 
[n]	Y. Sun, C. Adolphsen, A. L. Eide, and F. Zimmermann, “Lattice Design for the LHeC Recirculating Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD011, pp. 4298-4300. 
[n]	N. Carmignani et al., “Emittance blow-up with a magnetic shaker at different chromaticities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1274-1277. doi:10.18429/JACoW-IPAC2024-TUPG26
[n]	E. Bulyak and V. Kurilko, “Coherency of Magnetic-Bremsstrahlung Emitters and Prospects for the X-ray FELs”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP01J, pp. 655-657. 
[n]	A. Mondal, J. Jarvis, J. Ruan, and J. Santucci, “Development of a high-gain optical amplifier for optical stochastic cooling”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS121, unpublished. 
[n]	J. T. Kwan, G. DeVolder, C. Goldstein, and M. Snell, “Study of a Non-Intrusive Electron Beam Radius Diagnostic”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P055, pp. 2174-2176. 
[n]	M. Steck et al., “Electron Cooling Assisted Beam Accumulation in the Heavy Ion Synchrotron SIS by Repeated Multiturn Injection”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP97, pp. 1704-1706. 
[n]	C. Xing and G. Shu, “Flat beam generation in photoinjectors for high brightness electron beams”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB047, unpublished. 
[n]	P. C. Chiu, J. Chen, Y. K. Chen, K. T. Hsu, K. H. Hu, and C. H. Kuo, “Photon BPM Electronics Development at Taiwan Light Source”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD23, pp. 95-97. 
[n]	Yu. N. Grigor'ev and A.Yu. Zelinsky, “A Mathematical Model for Investigating Chromatic Electron Beam Extraction from a Pulse Stretcher Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA07, pp. 539-541. 
[n]	R. Tesse, C. Hernalsteens, E. Ramoisiaux, E. Gnacadja, M. Vanwelde, and N. Pauly, “Gantry design using achromatic scaling fixed-field magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5091-5094. doi:10.18429/JACoW-IPAC2023-THPM092
[n]	A. V. Zlobin et al., “Quench Performance and Field Quality of the 15 T Nb?Sn Dipole Demonstrator MDPCT1 in the First Test Run”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 282-285. doi:10.18429/JACoW-NAPAC2019-MOPLO20
[n]	O. Takeda et al., “Design Study on an 80 MHz RFq Linac for Heavy Ions”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1334-1337. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search