Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. T. Yan, “A Miniaturized High-Energy Wakefield Accelerator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 493-496.
[n] M. Otani et al., “Disk and Washer Coupled Cavity Linac Design and Cold-Model for Muon Linac”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1924-1927. doi:10.18429/JACoW-IPAC2019-TUPRB117
[n] S. Jackson, J-L. Nougaret, and M. Peryt, “Use of WML Technologies for Data-driven Accelerator Controls”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_094.
[n] A. Halavanau and P. Piot, “Numerical Investigation of a Cascaded Longitudinal Space-Charge Amplifier at the Fermilab's Advanced Superconducting Test Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1850-1852. doi:10.18429/JACoW-IPAC2015-TUPMA007
[n] S. Myers and E. Peschardt, “The Efficiency of Acceleration by Phase Displacement in the Presence of RF Noise”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3529-3532.
[n] F.-J. Decker, S. Colocho, A. Novokhatski, M. K. Sullivan, and U. Wienands, “Bunch Pattern with More Bunches in PEP-II”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT130, pp. 842-844.
[n] Y. T. Yan, M. Bai, and A. Chao, “Proton Storage Ring Optics Modeling with ac-Driven Betatron Motion”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP022, pp. 4356-4356.
[n] A. Halavanau and P. Piot, “Numerical Study of Three Dimensional Effects in Longitudinal Space-Charge Impedance”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1853-1855. doi:10.18429/JACoW-IPAC2015-TUPMA008
[n] J. P. Sikora et al., “Resonant TE Wave Measurements of Electron Cloud Densities at CesrTA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC170, pp. 1434-1436.
[n] M. G. Billing et al., “Status of Electron Cloud Dynamics Measurements at CESRTA”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS084, pp. 799-801.
[n] M. Klein, A.-S. Mueller, and K. G. Sonnad, “Simulations of the Microbunching Instability at ANKA using a Vlasov-Fokker-Planck Solver”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC095, pp. 2232-2234.
[n] S. Arai et al., “Linac Complex in the JAERI-KEK Joint RNB Facility”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE001, pp. 861-863.
[n] J. C. Juillard and E. Peschardt, “Phase and Voltage Control in the LEP Radio-Frequency System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1639-1642.
[n] Y. T. Yan, Y. Cai, W. S. Colocho, and F.-J. Decker, “Validation of PEP-II Resonantly Excited Turn-by-Turn BPM Data”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS070, pp. 3645-3647.
[n] N. Yamamoto et al., “Accelerators of the Central Japan Synchrotron Radiation Facility Project (II)”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC037, pp. 2987-2989.
[n] Y. Takashima et al., “Present Status of Accelerators in Aichi Synchrotron Radiation Center”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2877-2879. doi:10.18429/JACoW-IPAC2016-WEPOW023
[n] K. Tian, J. A. Safranek, and Y. T. Yan, “Machine Based Optimization Using Genetic Algorithms in a Storage Ring”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOCB1, pp. 430-432.
[n] N. Magnin et al., “External Post-Operational Checks for the LHC Beam Dumping System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU023, pp. 1111-1114.
[n] L. Faillace et al., “High Gradient Normal Conducting Radio-Frequency Photoinjector System for Sincrotrone Trieste”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEODS4, pp. 1504-1506.
[n] W. Liu, “HIRFL-SSC TRIM COIL CURRENTS CALCULATION BY CONJUGATE GRADIENTS METHOD”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20P32, pp. XX-XX.
[n] J.-P. Delahaye et al., “A Staged Muon-based Facility to Enable Intensity and Energy Frontier Science in the US”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA20, pp. 565-567.
[n] W. A. van Kampen and J. Liedorp, “A Fast Beam Quality Measuring Device”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 923-926.
[n] K. T. McDonald et al., “Target System Concept for a Muon Collider/Neutrino Factory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1568-1570. doi:10.18429/JACoW-IPAC2014-TUPRI008
[n] W. J. DeHope, D. A. Goerz, R. Kihara, M. M. Ong, G. E. Vogtlin, and J. M. Zentler, “An Induction Linac Test Stand”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT036, pp. 2455-2457.
[n] P. Young, “Progress Update on the Development of the 3He Linac for PET Isotope Production”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP26, pp. 113-115.
[n] W. Bartmann et al., “Beam Transfer to the FCC-hh Collider from a 3.3 TeV Booster in the LHC Tunnel”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3901-3904. doi:10.18429/JACoW-IPAC2015-THPF089
[n] B. Goddard et al., “Injection Beam Loss and Beam Quality Checks for the LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB066, pp. 1671-1673.
[n] G. H. Mackenzie, G. Dutto, R. E. Laxdal, J. B. Pearson, R. Worsham, and M. Zach, “Efficient Extraction of H-Ions from the TRIUMF Cyclotron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1710-1713.
[n] M. Isaila and K. Prelec, “Heavy Ion Source with Pulsed Magnetic Field”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 85-87.
[n] F.-J. Decker, Y. Cai, Y. Nosochkov, Y. T. Yan, and G. Yocky, “Lowering the Vertical Emittance in the LER Ring of PEP-II”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS058, pp. 3621-3623.
[n] N. Fuster Martinez et al., “Simulation Studies of Macro-particles Falling into the LHC Proton Beam”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS017, pp. 634-636.
[n] S. Takeuchi and M. Matsuda, “First Three Year Operational Experience with the JAERI Tandem-Booster”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A26, pp. 237-247.
[n] W. Bensiek, J. Dateo, J. Hager, H. Padamsee, W. Pruitt, and P. Williams, “Superconducting Performance of CEBAF/Cornell Prototype Cavities Fabricated by Babcock & Wilcox”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1887-1890.
[n] J. W. Xia et al., “Lattice of the CSR”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-05, pp. XX-XX.
[n] D. Arenius, “Cryogenic Plants for SRF Linacs”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THIOB01, pp. 811-813.
[n] D. Jacquet, R. Gorbonosov, and G. Kruk, “LSA - the High Level Application Software of the LHC - and Its Performance During the First Three Years of Operation”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC058, pp. 1201-1204.
[n] J. Kirchgessner, “External Beam Performance at P.P.A.”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 684-688.
[n] Z. Zaharieva and R. Billen, “Rapid Development of Database Interfaces with Oracle APEX, Used for the Controls Systems at CERN”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP108, pp. 883-885.
[n] H. Kabumoto, N. Ishizaki, M. Matsuda, Y. Otokawa, and S. Takeuchi, “Superconducting Twin Quarter Wave Resonator for Acceleration of Low Velocity Heavy Ions”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO093, pp. 849-853.
[n] Z. Zaharieva, M. Martin Marquez, and M. Peryt, “Database Foundation for the Configuration Management of the CERN Accelerator Controls Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOMAU004, pp. 48-51.
[n] A. Sugiura et al., “Improvement of Co-based Amorphous Core for Untuned Broadband RF Cavity”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH124, pp. 1304-1306.
[n] A. Halavanau and P. Piot, “Electron Beam Pattern Rotation as a Method of Tunable Bunch Train Generation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3372-3375. doi:10.18429/JACoW-IPAC2018-THPAK063
[n] A. Halavanau et al., “Transverse-to-Longitudinal Photocathode Distribution Imaging”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3361-3363. doi:10.18429/JACoW-IPAC2018-THPAK060
[n] N. R. Neveu et al., “Bunch Length Measurements Using CTR at the AWA with Comparison to Simulation”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4166-4168. doi:10.18429/JACoW-IPAC2018-THPMF048
[n] Y. Gomei, K. Nakayama, and S. Sukenobu, “Beam Loss Due to Multiple Scattering with Residual Gases in a Slow Accelerating Electron Synchrotron”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1527-1530.
[n] M. Zerlauth et al., “The LHC Post Mortem Analysis Framework”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP021, pp. 131-133.
[n] J. N. Corlett et al., “Superconducting Linac Design Concepts for a Next Generation Light Source at LBNL”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO13, pp. 229-235.
[n] M. Iwasaki et al., “The Construction Status of the SuperKEKB Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 14-17. doi:10.18429/JACoW-ICALEPCS2015-MOB3O04
[n] N. Ouchi et al., “R&D Activities for Superconducting Proton Linac at JAERI”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D003, pp. 77-79.
[n] K. Furukawa et al., “Control System Achievement at KEKB and Upgrade Design for SuperKEKB”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOBAUST05, pp. 17-19.
[n] H. Padamsee et al., “Does UHV Annealing above 1100C as a Final Surface Treatment Reduce Field Emission Loading in Superconducting Cavities?”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-35, pp. 397-399.
[n] F. Sakamoto et al., “Development of the High Resolution Electron Beam Profile Monitor for Medical Use X-Band Linac”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11020, pp. XX-XX.
[n] W. A. van Kampen and H. W. Schreuder, “Changing the Harmonic Number in a Synchrotron during Acceleration”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1018-1020.
[n] J. C. Garnier et al., “System Relation Management and Status Tracking for CERN Accelerator Systems”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC030, pp. 619-622.
[n] D. Wang, C.-X. Tang, W. Gai, C.-J. Jing, J. G. Power, and J. Q. Qiu, “Effect on Beam Dynamics From Wakefields in Travelling Wave Structure Excited by Bunch Train”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 289-292. doi:10.18429/JACoW-IPAC2015-MOPJE001
[n] X. P. Ding, H. G. Kirk, and K. T. McDonald, “Particle Production of a Graphite Target System for the Intensity Frontier”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2692-2694. doi:10.18429/JACoW-IPAC2015-WEPJE010
[n] A. Macpherson et al., “Diagnostic Developments at CERN's SRF Testing Facility”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB080, pp. 778-782.
[n] A. Wolski, B. Militsyn, M. Johnson, M. King, and P. Williams, “Transverse phase space tomography using machine learning at the CLARA accelerator test facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4851-4854. doi:10.18429/JACoW-IPAC2023-THPL170
[n] A. Halavanau et al., “Bunch Compression of Flat Beams”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3368-3371. doi:10.18429/JACoW-IPAC2018-THPAK062
[n] A. D. Bross, S. Geer, H. G. Kirk, V. D. Shiltsev, and M. S. Zisman, “Muon Cooling R&D for the Muon Collider - A Five-year Plan for the US”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper TUM1MCIO01, pp. 46-50.
[n] E. Viklund, T. Hara, M. Omet, K. Umemori, and R. Katayama, “Vertical test results for ITN single cell cavities”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 125-129. doi:10.18429/JACoW-SRF2025-MOP34
[n] A. Takagi, Y. Mori, J. Nakano, M. Sugaya, and T. Uesugi, “Radio Frequency Acceleration System for 150MeV FFAG”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB020, pp. 1231-1233.
[n] D. L. Friesel, T. E. Ellison, W. P. Jones, and R. E. Pollock, “A Low Energy Storage Ring for Pulse Stacking at IUCF”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper C04, pp. 207-210.
[n] M. Omet, R. Katayama, and K. Umemori, “Recent Activities Regarding 9-Cell TESLA-Type Cavities at KEK”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 792. doi:10.18429/JACoW-SRF2021-THPCAV006
[n] F.-J. Decker, W. S. Colocho, M.-H. Wang, Y. T. Yan, and G. Yocky, “Constants and Pseudo-constants of Coupled Beam Motion in the PEP-II Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC008, pp. 2990-2992.
[n] H. Padamsee et al., “Development and Tests of a Superconducting Cavity for High Current Electron Storage Rings”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2048-2051.
[n] A. Galimberti et al., “Improvements on the Photon Beam Diagnostics at ELETTRA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI109, pp. 1891-1893.
[n] L. Aldea, J. Reich, and P. Wucherer, “The Modified Center Region for the Project ISIS at JULIC”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-23, pp. 461-463.
[n] A. Halavanau, et al., “Generation of Homogeneous and Patterned Electron Beams using a Microlens Array Laser-Shaping Technique”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. XX-XX. doi:10.18429/JACoW-IPAC2016-THPOW021
[n] D. Sun, P. Young, A. Moretti, and J. Dey, “Design and Operation of PET Radio Frequency Quadrupoles”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P044, pp. 3018-3020.
[n] M. W. McGee et al., “Transport of LCLS-II 1.3 GHz Cryomodule to SLAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2268-2270. doi:10.18429/JACoW-IPAC2016-WEPMR006
[n] Y. Futami et al., “Secondary Beam Course for the Medical Use at HIMAC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP12C, pp. 2357-2359.
[n] Z. Zaharieva, S. Jensen, J. Rolland Lopez De Coca, and A. Romero Marin, “Advantages and Challenges to the Use of On-line Feedback in CERN's Accelerators Controls Configuration Management”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC025, pp. 600-603.
[n] J. Swierblewski and D. Bocian, “Status of the cryomodule tests as a part of Polish in-kind contribution to the European Spallation Source (ESS) realized by IFJ PAN”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper MOP76, unpublished.
[n] R. Billen, J. Mariethoz, and P. Le Roux, “The LHC Functional Layout Database as Foundation of the Controls System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA03, pp. 526-528.
[n] W. Herr, B. Goddard, E. Keil, M. Lamont, M. Meddahi, and E. Peschardt, “Experience with Bunch Trains in LEP”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6B007, pp. 309-311.
[n] K. Hirosawa et al., “Measurements of Momentum Halo Due to the Reduced RFQ Voltage During the LIPAc Beam Commissioning”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 112-117. doi:10.18429/JACoW-HB2023-TUA3I2
[n] E. van der Kraaij et al., “MRI-Guided-PT: Integrating an MRI in a Proton Therapy System”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 144-147. doi:10.18429/JACoW-CYCLOTRONS2019-TUB03
[n] J. Kirchgessner et al., “The Application of Heavily Damped Superconducting Cavities to the Acceleration of High Current Electron Beams”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-50, pp. 453-455.
[n] A. Macpherson et al., “CERN's Bulk Niobium High Gradient SRF Programme: Developments and Recent Cold Test Results”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB074, pp. 291-295.
[n] W. Pairsuwan and T. Ishii, “The Siam Photon Project”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4B004, pp. 36-42.
[n] R. K. Bhandari and J. Reich, “The Beam Handling and Axial Injection System for the Project ISIS at JULIC”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper DC-03, pp. 261-265.
[n] J. Liedorp and W. A. van Kampen, “High Quality Beams with Precession Injection”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-05, pp. 2325-2328.
[n] C. F. Hajdu, C. Zamantzas, and T. Dab?â, “Development of a Method for Continuous Functional Supervision of BLM Systems”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 90-93. doi:10.18429/JACoW-IBIC2016-MOPG21
[n] T. Akagi et al., “Completion of Phase B+ beam commissioning of Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 705-708. doi:10.18429/JACoW-LINAC2024-THPB036
[n] L. Huang, J. Chen, W. Liu, X. Liu, and Y. Han, “Booster conceptual design of the Southern Advanced Photon Source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 400-403. doi:10.18429/JACoW-IPAC2023-MOPA147
[n] A. Dixon, P. Williams, S. Thorin, and T. Charles, “The MAX-IV linac with variable bunch compressors”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3272-3275. doi:10.18429/JACoW-IPAC2023-WEPL073
[n] W. Br?ñutigam, J. Reich, M. Herschbach, and K. Kennepohl, “Beam Phase Detection with a Fixed Intermediate Frequency System at JULIC”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-18, pp. 2375-2378.
[n] F. Cismondi et al., “Planned future upgrades of Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 206-208. doi:10.18429/JACoW-LINAC2024-MOPB071
[n] K. Hasegawa et al., “LIPAc (linear IFMIF prototype accelerator) beam commissioning & future plans”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 15-20. doi:10.18429/JACoW-IPAC2023-MOYD2
[n] M. Johnson, J. Jones, and P. Williams, “Jitter tolerance for the FEBE beamline on CLARA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2071-2074. doi:10.18429/JACoW-IPAC2023-TUPL143
[n] Y. Sumitomo, T. Kubota, K. Harada, L. Soga, T. Sakai, and Y. Hayakawa, “Development of phase locked oscillator FEL for high repetition mid-infrared frequency combs”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 516-518. doi:10.18429/JACoW-LINAC2024-TUPB095
[n] G. Hall et al., “Highly Charged Ion Beam Transport by Space Charge Compensation Conditions”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP070G, pp. 2426-2428.
[n] J. M. Fisher, J. B. Gordon, L. J. Lagin, S. L. West, and J. C. Ho, “Java Tool Framework for Automation of Hardware Commissioning and Maintenance Procedures”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA14, pp. 547-549.
[n] P. Williams, “Prospects for future facilities based on energy recovery linacs”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5193-5198. doi:10.18429/JACoW-IPAC2023-FRXG1
[n] W. Kaabi et al., “PERLE: a novel facility for ERL development and applications in multi-turn configuration and high-power regime”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEOGC3, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. T. Yan, “A Miniaturized High-Energy Wakefield Accelerator”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 493-496.
- M. Otani et al., “Disk and Washer Coupled Cavity Linac Design and Cold-Model for Muon Linac”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1924-1927.
- S. Jackson, J-L. Nougaret, and M. Peryt, “Use of WML Technologies for Data-driven Accelerator Controls”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_094.
- A. Halavanau and P. Piot, “Numerical Investigation of a Cascaded Longitudinal Space-Charge Amplifier at the Fermilab's Advanced Superconducting Test Accelerator”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1850-1852.
- S. Myers and E. Peschardt, “The Efficiency of Acceleration by Phase Displacement in the Presence of RF Noise”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3529-3532.
- F.-J. Decker, S. Colocho, A. Novokhatski, M. K. Sullivan, and U. Wienands, “Bunch Pattern with More Bunches in PEP-II”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT130, pp. 842-844.
- Y. T. Yan, M. Bai, and A. Chao, “Proton Storage Ring Optics Modeling with ac-Driven Betatron Motion”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP022, pp. 4356-4356.
- A. Halavanau and P. Piot, “Numerical Study of Three Dimensional Effects in Longitudinal Space-Charge Impedance”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1853-1855.
- J. P. Sikora et al., “Resonant TE Wave Measurements of Electron Cloud Densities at CesrTA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC170, pp. 1434-1436.
- M. G. Billing et al., “Status of Electron Cloud Dynamics Measurements at CESRTA”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS084, pp. 799-801.
- M. Klein, A.-S. Mueller, and K. G. Sonnad, “Simulations of the Microbunching Instability at ANKA using a Vlasov-Fokker-Planck Solver”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC095, pp. 2232-2234.
- S. Arai et al., “Linac Complex in the JAERI-KEK Joint RNB Facility”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE001, pp. 861-863.
- J. C. Juillard and E. Peschardt, “Phase and Voltage Control in the LEP Radio-Frequency System”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1639-1642.
- Y. T. Yan, Y. Cai, W. S. Colocho, and F.-J. Decker, “Validation of PEP-II Resonantly Excited Turn-by-Turn BPM Data”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS070, pp. 3645-3647.
- N. Yamamoto et al., “Accelerators of the Central Japan Synchrotron Radiation Facility Project (II)”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC037, pp. 2987-2989.
- Y. Takashima et al., “Present Status of Accelerators in Aichi Synchrotron Radiation Center”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2877-2879.
- K. Tian, J. A. Safranek, and Y. T. Yan, “Machine Based Optimization Using Genetic Algorithms in a Storage Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOCB1, pp. 430-432.
- N. Magnin et al., “External Post-Operational Checks for the LHC Beam Dumping System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU023, pp. 1111-1114.
- L. Faillace et al., “High Gradient Normal Conducting Radio-Frequency Photoinjector System for Sincrotrone Trieste”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEODS4, pp. 1504-1506.
- W. Liu, “HIRFL-SSC TRIM COIL CURRENTS CALCULATION BY CONJUGATE GRADIENTS METHOD”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20P32, pp. XX-XX.
- J.-P. Delahaye et al., “A Staged Muon-based Facility to Enable Intensity and Energy Frontier Science in the US”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPBA20, pp. 565-567.
- W. A. van Kampen and J. Liedorp, “A Fast Beam Quality Measuring Device”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 923-926.
- K. T. McDonald et al., “Target System Concept for a Muon Collider/Neutrino Factory”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1568-1570.
- W. J. DeHope, D. A. Goerz, R. Kihara, M. M. Ong, G. E. Vogtlin, and J. M. Zentler, “An Induction Linac Test Stand”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT036, pp. 2455-2457.
- P. Young, “Progress Update on the Development of the 3He Linac for PET Isotope Production”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP26, pp. 113-115.
- W. Bartmann et al., “Beam Transfer to the FCC-hh Collider from a 3.3 TeV Booster in the LHC Tunnel”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3901-3904.
- B. Goddard et al., “Injection Beam Loss and Beam Quality Checks for the LHC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB066, pp. 1671-1673.
- G. H. Mackenzie, G. Dutto, R. E. Laxdal, J. B. Pearson, R. Worsham, and M. Zach, “Efficient Extraction of H-Ions from the TRIUMF Cyclotron”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1710-1713.
- M. Isaila and K. Prelec, “Heavy Ion Source with Pulsed Magnetic Field”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 85-87.
- F.-J. Decker, Y. Cai, Y. Nosochkov, Y. T. Yan, and G. Yocky, “Lowering the Vertical Emittance in the LER Ring of PEP-II”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS058, pp. 3621-3623.
- N. Fuster Martinez et al., “Simulation Studies of Macro-particles Falling into the LHC Proton Beam”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS017, pp. 634-636.
- S. Takeuchi and M. Matsuda, “First Three Year Operational Experience with the JAERI Tandem-Booster”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A26, pp. 237-247.
- W. Bensiek, J. Dateo, J. Hager, H. Padamsee, W. Pruitt, and P. Williams, “Superconducting Performance of CEBAF/Cornell Prototype Cavities Fabricated by Babcock & Wilcox”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1887-1890.
- J. W. Xia et al., “Lattice of the CSR”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P4-05, pp. XX-XX.
- D. Arenius, “Cryogenic Plants for SRF Linacs”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THIOB01, pp. 811-813.
- D. Jacquet, R. Gorbonosov, and G. Kruk, “LSA - the High Level Application Software of the LHC - and Its Performance During the First Three Years of Operation”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC058, pp. 1201-1204.
- J. Kirchgessner, “External Beam Performance at P.P.A.”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 684-688.
- Z. Zaharieva and R. Billen, “Rapid Development of Database Interfaces with Oracle APEX, Used for the Controls Systems at CERN”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP108, pp. 883-885.
- H. Kabumoto, N. Ishizaki, M. Matsuda, Y. Otokawa, and S. Takeuchi, “Superconducting Twin Quarter Wave Resonator for Acceleration of Low Velocity Heavy Ions”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO093, pp. 849-853.
- Z. Zaharieva, M. Martin Marquez, and M. Peryt, “Database Foundation for the Configuration Management of the CERN Accelerator Controls Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOMAU004, pp. 48-51.
- A. Sugiura et al., “Improvement of Co-based Amorphous Core for Untuned Broadband RF Cavity”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH124, pp. 1304-1306.
- A. Halavanau and P. Piot, “Electron Beam Pattern Rotation as a Method of Tunable Bunch Train Generation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3372-3375.
- A. Halavanau et al., “Transverse-to-Longitudinal Photocathode Distribution Imaging”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3361-3363.
- N. R. Neveu et al., “Bunch Length Measurements Using CTR at the AWA with Comparison to Simulation”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4166-4168.
- Y. Gomei, K. Nakayama, and S. Sukenobu, “Beam Loss Due to Multiple Scattering with Residual Gases in a Slow Accelerating Electron Synchrotron”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1527-1530.
- M. Zerlauth et al., “The LHC Post Mortem Analysis Framework”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP021, pp. 131-133.
- J. N. Corlett et al., “Superconducting Linac Design Concepts for a Next Generation Light Source at LBNL”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO13, pp. 229-235.
- M. Iwasaki et al., “The Construction Status of the SuperKEKB Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 14-17.
- N. Ouchi et al., “R&D Activities for Superconducting Proton Linac at JAERI”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D003, pp. 77-79.
- K. Furukawa et al., “Control System Achievement at KEKB and Upgrade Design for SuperKEKB”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOBAUST05, pp. 17-19.
- H. Padamsee et al., “Does UHV Annealing above 1100C as a Final Surface Treatment Reduce Field Emission Loading in Superconducting Cavities?”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-35, pp. 397-399.
- F. Sakamoto et al., “Development of the High Resolution Electron Beam Profile Monitor for Medical Use X-Band Linac”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11020, pp. XX-XX.
- W. A. van Kampen and H. W. Schreuder, “Changing the Harmonic Number in a Synchrotron during Acceleration”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1018-1020.
- J. C. Garnier et al., “System Relation Management and Status Tracking for CERN Accelerator Systems”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC030, pp. 619-622.
- D. Wang, C.-X. Tang, W. Gai, C.-J. Jing, J. G. Power, and J. Q. Qiu, “Effect on Beam Dynamics From Wakefields in Travelling Wave Structure Excited by Bunch Train”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 289-292.
- X. P. Ding, H. G. Kirk, and K. T. McDonald, “Particle Production of a Graphite Target System for the Intensity Frontier”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2692-2694.
- A. Macpherson et al., “Diagnostic Developments at CERN's SRF Testing Facility”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB080, pp. 778-782.
- A. Wolski, B. Militsyn, M. Johnson, M. King, and P. Williams, “Transverse phase space tomography using machine learning at the CLARA accelerator test facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL170, pp. 4851-4854.
- A. Halavanau et al., “Bunch Compression of Flat Beams”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3368-3371.
- A. D. Bross, S. Geer, H. G. Kirk, V. D. Shiltsev, and M. S. Zisman, “Muon Cooling R&D for the Muon Collider - A Five-year Plan for the US”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper TUM1MCIO01, pp. 46-50.
- E. Viklund, T. Hara, M. Omet, K. Umemori, and R. Katayama, “Vertical test results for ITN single cell cavities”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 125-129.
- A. Takagi, Y. Mori, J. Nakano, M. Sugaya, and T. Uesugi, “Radio Frequency Acceleration System for 150MeV FFAG”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB020, pp. 1231-1233.
- D. L. Friesel, T. E. Ellison, W. P. Jones, and R. E. Pollock, “A Low Energy Storage Ring for Pulse Stacking at IUCF”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper C04, pp. 207-210.
- M. Omet, R. Katayama, and K. Umemori, “Recent Activities Regarding 9-Cell TESLA-Type Cavities at KEK”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 792.
- F.-J. Decker, W. S. Colocho, M.-H. Wang, Y. T. Yan, and G. Yocky, “Constants and Pseudo-constants of Coupled Beam Motion in the PEP-II Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC008, pp. 2990-2992.
- H. Padamsee et al., “Development and Tests of a Superconducting Cavity for High Current Electron Storage Rings”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2048-2051.
- A. Galimberti et al., “Improvements on the Photon Beam Diagnostics at ELETTRA”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI109, pp. 1891-1893.
- L. Aldea, J. Reich, and P. Wucherer, “The Modified Center Region for the Project ISIS at JULIC”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-23, pp. 461-463.
- A. Halavanau, et al., “Generation of Homogeneous and Patterned Electron Beams using a Microlens Array Laser-Shaping Technique”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. XX-XX.
- D. Sun, P. Young, A. Moretti, and J. Dey, “Design and Operation of PET Radio Frequency Quadrupoles”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P044, pp. 3018-3020.
- M. W. McGee et al., “Transport of LCLS-II 1.3 GHz Cryomodule to SLAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2268-2270.
- Y. Futami et al., “Secondary Beam Course for the Medical Use at HIMAC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP12C, pp. 2357-2359.
- Z. Zaharieva, S. Jensen, J. Rolland Lopez De Coca, and A. Romero Marin, “Advantages and Challenges to the Use of On-line Feedback in CERN's Accelerators Controls Configuration Management”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC025, pp. 600-603.
- J. Swierblewski and D. Bocian, “Status of the cryomodule tests as a part of Polish in-kind contribution to the European Spallation Source (ESS) realized by IFJ PAN”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper MOP76, unpublished.
- R. Billen, J. Mariethoz, and P. Le Roux, “The LHC Functional Layout Database as Foundation of the Controls System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA03, pp. 526-528.
- W. Herr, B. Goddard, E. Keil, M. Lamont, M. Meddahi, and E. Peschardt, “Experience with Bunch Trains in LEP”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6B007, pp. 309-311.
- K. Hirosawa et al., “Measurements of Momentum Halo Due to the Reduced RFQ Voltage During the LIPAc Beam Commissioning”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUA3I2, pp. 112-117.
- E. van der Kraaij et al., “MRI-Guided-PT: Integrating an MRI in a Proton Therapy System”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 144-147.
- J. Kirchgessner et al., “The Application of Heavily Damped Superconducting Cavities to the Acceleration of High Current Electron Beams”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-50, pp. 453-455.
- A. Macpherson et al., “CERN's Bulk Niobium High Gradient SRF Programme: Developments and Recent Cold Test Results”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB074, pp. 291-295.
- W. Pairsuwan and T. Ishii, “The Siam Photon Project”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4B004, pp. 36-42.
- R. K. Bhandari and J. Reich, “The Beam Handling and Axial Injection System for the Project ISIS at JULIC”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper DC-03, pp. 261-265.
- J. Liedorp and W. A. van Kampen, “High Quality Beams with Precession Injection”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-05, pp. 2325-2328.
- C. F. Hajdu, C. Zamantzas, and T. Dab?â, “Development of a Method for Continuous Functional Supervision of BLM Systems”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 90-93.
- T. Akagi et al., “Completion of Phase B+ beam commissioning of Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 705-708.
- L. Huang, J. Chen, W. Liu, X. Liu, and Y. Han, “Booster conceptual design of the Southern Advanced Photon Source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA147, pp. 400-403.
- A. Dixon, P. Williams, S. Thorin, and T. Charles, “The MAX-IV linac with variable bunch compressors”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL073, pp. 3272-3275.
- W. Br?ñutigam, J. Reich, M. Herschbach, and K. Kennepohl, “Beam Phase Detection with a Fixed Intermediate Frequency System at JULIC”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-18, pp. 2375-2378.
- F. Cismondi et al., “Planned future upgrades of Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 206-208.
- K. Hasegawa et al., “LIPAc (linear IFMIF prototype accelerator) beam commissioning & future plans”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOYD2, pp. 15-20.
- M. Johnson, J. Jones, and P. Williams, “Jitter tolerance for the FEBE beamline on CLARA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL143, pp. 2071-2074.
- Y. Sumitomo, T. Kubota, K. Harada, L. Soga, T. Sakai, and Y. Hayakawa, “Development of phase locked oscillator FEL for high repetition mid-infrared frequency combs”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 516-518.
- G. Hall et al., “Highly Charged Ion Beam Transport by Space Charge Compensation Conditions”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP070G, pp. 2426-2428.
- J. M. Fisher, J. B. Gordon, L. J. Lagin, S. L. West, and J. C. Ho, “Java Tool Framework for Automation of Hardware Commissioning and Maintenance Procedures”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA14, pp. 547-549.
- P. Williams, “Prospects for future facilities based on energy recovery linacs”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper FRXG1, pp. 5193-5198.
- W. Kaabi et al., “PERLE: a novel facility for ERL development and applications in multi-turn configuration and high-power regime”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEOGC3, unpublished.
Back to search